Show Order Info
SKU:PA1902
Clonality:Polyclonal
Application:IHC-P, IHC-F, WB
Price: $200.00
Quantity:
Technical
Specs
Kit
Components
Gene
Information
Application
Data & Images
Reviews
Publications
FAQs

Overview

Product Name Anti-TRIF Antibody
Description Rabbit IgG polyclonal antibody for TIR domain-containing adapter molecule 1(TICAM1) detection. Tested with WB, IHC-P, IHC-F in Human.
Cite This Product Anti-TRIF Antibody (Boster Biological Technology, Pleasanton CA, USA, Catalog # PA1902)
Replacement Item This antibody may replace the following items: sc-130621|sc-27478|sc-514384 from Santa Cruz Biotechnology.
Host Rabbit
Isotype N/A
Validated Species Human
Application IHC-P, IHC-F, WB

*Our Boster Guarantee covers the use of this product in the above tested applications.

**For positive and negative control design, consult "Tissue specificity" under Protein Target Info.

Recommended Detection Systems Boster recommends Enhanced Chemiluminescent Kit with anti-Rabbit IgG (EK1002) for Western blot, and HRP Conjugated anti-Rabbit IgG Super Vision Assay Kit (SV0002-1) for IHC(P) and IHC(F).
*Blocking peptide can be purchased at $50. Contact us for more information
**Boster also offers various secondary antibodies for Immunoflourescecne and IHC. Take advantage of the buy 1 primary antibody get 1 secondary antibody for free promotion for the entire year 2017!
Immunogen A synthetic peptide corresponding to a sequence at the C-terminus of human TRIF(692-712aa NNHMWNQRGSQAPEDKTQEAE).
Cross Reactivity No cross reactivity with other proteins
Pack Size 100μg/vial

Properties

Clonality Polyclonal
Form Lyophilized
Contents Each vial contains 5mg BSA, 0.9mg NaCl, 0.2mg Na2HPO4, 0.05mg Thimerosal, 0.05mg NaN3.
*carrier free antibody available upon request.
Concentration Add 0.2ml of distilled water will yield a concentration of 500ug/ml.
Storage At -20˚C for one year. After reconstitution, at 4˚C for one month. It can also be aliquotted and stored frozen at -20˚C for a longer time.Avoid repeated freezing and thawing.
Purification Immunogen affinity purified.
Isotype N/A

Protein Target Info (Source: Uniprot.org)

You can check the tissue specificity below for information on selecting positive and negative control.

Gene Name TICAM1
Protein Name TIR domain-containing adapter molecule 1
Molecular Weight 76422 MW
Protein Function Involved in innate immunity against invading pathogens. Adapter used by TLR3 and TLR4 (through TICAM2) to mediate NF- kappa-B and interferon-regulatory factor (IRF) activation, and to induce apoptosis. Ligand binding to these receptors results in TRIF recruitment through its TIR domain. Distinct protein- interaction motifs allow recruitment of the effector proteins TBK1, TRAF6 and RIPK1, which in turn, lead to the activation of transcription factors IRF3 and IRF7, NF-kappa-B and FADD respectively. .
Tissue Specificity Ubiquitously expressed but with higher levels in liver. .
Sequence Similarities Contains 1 TIR domain.
Subcellular Localization Cytoplasmic vesicle, autophagosome . Colocalizes with UBQLN1 in the autophagosome. .
Uniprot ID Q8IUC6
Alternative Names TIR domain-containing adapter molecule 1;TICAM-1;Proline-rich, vinculin and TIR domain-containing protein B;Putative NF-kappa-B-activating protein 502H;Toll-interleukin-1 receptor domain-containing adapter protein inducing interferon beta;MyD88-3;TIR domain-containing adapter protein inducing IFN-beta;TICAM1;PRVTIRB, TRIF;
Research Areas |immunology|innate immunity|cytokines|interferons| immunology|tlr signaling|
*if product is indicated to react with multiple species, protein info is based on the human gene.

Background for TIR domain-containing adapter molecule 1

TICAM(TIR DOMAIN-CONTAINING ADAPTOR MOLECULE 1), also known as TICAM1 or TRIF, is an adapter in responding to activation of toll-like receptors(TLRs). It mediates the rather delayed cascade of two TLR-associated signaling cascades, where the other one is dependent upon a MyD88 adapter. By genomic sequence analysis, Oshiumi et al.(2003) mapped the TICAM1 gene to chromosome 19p13.3. By coimmunoprecipitation analysis, Oshiumi et al.(2003) showed that TICAM1 interacts specifically with TLR3, but not with other TLRs. Functional analysis showed that the association of TLR3 and TICAM1 mediates dsRNA activation of IFNB, through either NFKB, AP1, or IRF3. TICAM1 activation of NFKB was found to occur predominantly through IRAK1 rather than IRAK2. Small interfering(si)RNA blockage of TICAM1, just upstream of the TIR domain, reduced IFNB production in response to dsRNA.

Anti-TRIF Antibody Images

Click the images to enlarge.

Anti-TRIF Antibody
Anti-TRIF antibody, PA1902, Western blotting
Recombinant Protein Detection Source: E.coli derived -recombinant Human TICAM1, 44.7KD (162aa tag+ Q468-E712)
Lane 1: Recombinant Human TICAM1 Protein 10ng
Lane 2: Recombinant Human TICAM1 Protein 5ng
Lane 3: Recombinant Human TICAM1 Protein 2.5ng
Lane 4: Recombinant Human TICAM1 Protein 1.25ng
Anti-TRIF Antibody
Anti-TRIF antibody, PA1902, Western blotting
Lane 1: JURKAT Cell Lysate
Lane 2: HL-60 Cell Lysate
Anti-TRIF Antibody
Anti-TRIF antibody, PA1902, IHC(P)
IHC(P): Human Mammary Cancer Tissue
Write a review for PA1902

FAQs

Q: Do you offer BSA-free antibodies? Keyword: Bovine serum albumin, carrier protein, conjugation
A: Yes, please contact us at support@bosterbio.com for more information about BSA-free antibodies and availability. The new BSA-free formula uses trehalose as a replacement to BSA. We have tested many alternative chemicals and found that trehalose protects the antibodies the best.
Q: Is your western blot protocol provided from the website applicable for all your antibodies? Keyword: applications, WB
A: The protocol is applicable for all our antibodies in WB, the NC Membrane(0.45μm or 0.22μm) and transfer time(70 mins or 50 mins) depends on the protein molecular weight, details can be found in included protocol.
Q: Can I conjugate markers to this antibody? Can I link custom conjugates to this antibody? Keyword: conjugation
A: The antibody is stored with BSA and cannot be conjugated with markers. Carrier free antibodies are available upon request. Please contact support@bosterbio.com
Q: What should I use for negative control?
A: Please contact us for negative control suggestions. You can also check expression databases such as genecards, uniprot etc. Due to logistic reasons, we do not sell serum or lysates that we use internally for positive or negative control.
Q: Where can I find troubleshooting information? What should I do if I have unexpected bands, high background, no signal, weak signal
A: You can find Boster's troubleshoot guides under tech support tab. Please contact us for further assistance on troubleshooting your experiment.
Q: What is the immunogen sequence of this antibody? Is this antibody polyclonal or monoclonal?
A: You can find the immunogen sequence under "Immunogen" and clonality in the product name.
Q: What is the expected band size? Why is it different than the observed band size?
A: The expected band size is predicted on the size of the protein. The actual band size may be affected by a few other factors including but not limited to:
1. Post-translational modification:phosphorylation, methylation, glycosylation etc. These modifications prevent SDS molecules from binding to the target protein and thus make the band size appear larger than expected
2. Post-translational cleavage: this can cause smaller bands and or multiple bands

3. Alternative splicing: the same gene can have alternative splicing patterns generating different size proteins, all with reactivities to the antibody.

4. Amino Acid R chain charge: SDS binds to positive charges. The different size and charge of the Amino Acid side chains can affect the amount of SDS binding and thus affect the observed band size.
5. Multimers: Multimers are usually broken up in reducing conditions. However if the interactions between the multimers are strong, the band may appear higher.,
Q: What is the suggested dilution ratio for Western Blot (WB), Immunohistochemistry (IHC) and or ELISA standards? What is the optimal pH for the sample?
A: Check the datasheet for the product for details on dilution ratios for different experiments. You can find the datasheet button on the right side of the product page.
Q: What is the protocol you used for your Western blotting (WB) and Immunohistochemistry (IHC)?
A: Check our protocols under the tech support tab.