|Sample Type:||cell culture supernates, cell lysates, serum and plasma (heparin, EDTA).|
Data & Images
|Product Name||Human ANGPTL4 PicoKine™ ELISA Kit|
|Description||For quantitative detection of human ANGPTL4 in cell culture supernates, cell lysates, serum and plasma (heparin, EDTA).|
|Cite This Product||Human ANGPTL4 PicoKine™ ELISA Kit (Boster Biological Technology, Pleasanton CA, USA, Catalog # EK0960)|
|Replacement Item||This antibody may replace the following items: sc-34113|sc-32186|sc-66806|sc-373762|sc-373761|sc-66807|sc-32184 from Santa Cruz Biotechnology.|
*Our Boster Guarantee covers the use of this product in the above tested applications.
**For positive and negative control design, consult "Tissue specificity" under Protein Target Info.
|Immunogen||Expression system for standard: NSO; Immunogen sequence: L165-S406|
|Cross Reactivity||There is no detectable cross-reactivity with other relevant proteins.|
*Sensitivity, or Lower Limit of Detection (LLD), is the minimum level of target protein the ELISA assay can detect. We measure 20 blank wells and if the O.D. value is 2 standard deviations higher than the blanks' average O.D. the sample can be deemed positive.
*This assay range is determined using common samples. For samples with low target protein concentrations, users can adjust the standard curve to extend the lower limit of assay range.
|Sample Type||cell culture supernates, cell lysates, serum and plasma (heparin, EDTA).
*The above listed samples are the ones valided with the assay. If you do not see your sample of interest listed, as long as there is enough level of target protein present in the sample, this Picokine™ ELISA kit should detect it.
**For protocol and tips regarding preparing your sample of interest, please check our ELISA sample preparation guide.
|Capture Antibody||monoclonal antibody from mouse|
|Detection Antibody||polyclonal antibody from goat|
|Natural Levels||Some research articles suggesting the natural levels of ANGPTL4 are listed below:|
|Storage||Store at 4˚C for 6 months, at -20˚C for 12 months. Avoid multiple freeze-thaw cycles(Shipped with wet ice.)|
|EK0960-CAP||96-well plate precoated with anti-Human ANGPTL4 antibody||1|
|EK0960-ST||lyophilized recombinant Human ANGPTL4 standard||40ng/tubex2|
|EK0960-DA||biotinylated anti-Human ANGPTL4 antibody||130ul(dilution 1:100)|
|AR1103||Avidin-Biotin-Peroxidase Complex(ABC)||130ul(dilution 1:100)|
|AR1106-1||sample diluent buffer||30ml|
|AR1106-2||antibody diluent buffer||12ml|
|AR1106-3||ABC diluent buffer||12ml|
|AR1104||TMB color developing agent||10ml|
|AR1105||TMB stop solution||10ml|
*Additional components can be purchased. If you need extra of the above components please order them together to avoid additional shipping charges.See Prices For Extra Components
Material Required But Not Provided
- 1. Microplate reader in standard size.
- 2. Automated plate washer.
- 3. Adjustable pipettes and pipette tips. Multichannel pipettes are recommended in the condition of large amount of samples in the detection.
- 4. Clean tubes and Eppendorf tubes.
- 5. Washing buffer (neutral PBS or TBS).
- Preparation of 0.01M TBS: Add 1.2g Tris, 8.5g Nacl; 450μl of purified acetic acid or 700μl of concentrated hydrochloric acid to 1000ml H2O and adjust pH to 7.2-7.6. Finally, adjust the total volume to 1L.
- Preparation of 0.01 M PBS: Add 8.5g sodium chloride, 1.4g Na2HPO4 and 0.2g NaH2PO4 to 1000ml distilled water and adjust pH to 7.2-7.6. Finally, adjust the total volume to 1L.
Protein Target Info (Source: Uniprot.org)
You can check the tissue specificity below for information on selecting positive and negative control.
|Protein Name||Angiopoietin-related protein 4|
|Molecular Weight||45214 MW|
|Protein Function||Protein with hypoxia-induced expression in endothelial cells. May act as a regulator of angiogenesis and modulate tumorigenesis. Inhibits proliferation, migration, and tubule formation of endothelial cells and reduces vascular leakage. May exert a protective function on endothelial cells through an endocrine action. It is directly involved in regulating glucose homeostasis, lipid metabolism, and insulin sensitivity. In response to hypoxia, the unprocessed form of the protein accumulates in the subendothelial extracellular matrix (ECM). The matrix-associated and immobilized unprocessed form limits the formation of actin stress fibers and focal contacts in the adhering endothelial cells and inhibits their adhesion. It also decreases motility of endothelial cells and inhibits the sprouting and tube formation (By similarity). .|
|Tissue Specificity||Expressed at high levels in the placenta, heart, liver, muscle, pancreas and lung but expressed poorly in the brain and kidney. .|
|Sequence Similarities||Contains 1 fibrinogen C-terminal domain.|
|Subcellular Localization||Secreted . Secreted, extracellular space, extracellular matrix . The unprocessed form interacts with the extracellular matrix. This may constitute a dynamic reservoir, a regulatory mechanism of the bioavailability of ANGPTL4 (By similarity). .|
|Alternative Names||Angiopoietin-related protein 4;Angiopoietin-like protein 4;Hepatic fibrinogen/angiopoietin-related protein;HFARP;ANGPTL4;ARP4, HFARP, PGAR;PP1158, PSEC0166, UNQ171/PRO197;|
|Research Areas|||cardiovascular|angiogenesis|growth factors| cardiovascular|hypoxia|hypoxia-regulated|lipids / lipoproteins|lipid metabolism|cholesterol metabolism| cancer|cancer metabolism|metabolic signaling pathway|metabolism of lipids and lipoproteins|response to hypoxia| metabolism|pathways and processes|metabolic signaling pathways|lipid and lipoprotein metabolism|metabolism processes||
Background for Angiopoietin-related protein 4
Human ANGPTL4 PicoKine™ ELISA Kit Images
Click the images to enlarge.
Intra/Inter Assay Precision
|Intra-Assay Precision||Inter-Assay Precision|
Typical Data Obtained from Human ANGPTL4 PicoKine™ ELISA Kit
(TMB reaction incubate at 37°C for 20-25min)
*The typical data is obtained from Boster's internal QC result and for reference only. It may differ from the lab test results of the end users. It is more important that the user's lab test results reflect the same linearity demonstrated in the typical data than achieving exactly the same O.D. values.