|Sample Type:||cell culture supernates, serum and plasma(heparin, EDTA, citrate).|
Data & Images
|Product Name||Human IL-1 Beta PicoKine™ ELISA Kit|
|Description||Sandwich High Sensitivity ELISA kit for Quantitative Detection of Human IL-1 beta. 96wells/kit, with removable strips.|
|Cite This Product||Human IL-1 Beta PicoKine™ ELISA Kit (Boster Biological Technology, Pleasanton CA, USA, Catalog # EK0392)|
*Our Boster Guarantee covers the use of this product in the above tested applications.
**For positive and negative control design, consult "Tissue specificity" under Protein Target Info.
|Immunogen||Expression system for standard: E.coli,A117-S269|
|Cross Reactivity||There is no detectable cross-reactivity with other relevant proteins.|
|Pack Size||96wells/kit, with removable strips.|
*Sensitivity, or Lower Limit of Detection (LLD), is the minimum level of target protein the ELISA assay can detect. We measure 20 blank wells and if the O.D. value is 2 standard deviations higher than the blanks' average O.D. the sample can be deemed positive.
*This assay range is determined using common samples. For samples with low target protein concentrations, users can adjust the standard curve to extend the lower limit of assay range.
|Sample Type||cell culture supernates, serum and plasma(heparin, EDTA, citrate).
*The above listed samples are the ones valided with the assay. If you do not see your sample of interest listed, as long as there is enough level of target protein present in the sample, this Picokine™ ELISA kit should detect it.
**For protocol and tips regarding preparing your sample of interest, please check our ELISA sample preparation guide.
|Capture Antibody||monoclonal antibody from mouse|
|Detection Antibody||polyclonal antibody from goat|
|Natural Levels||Some research articles suggesting the natural levels of IL1B are listed below:|
|Storage||Store at 4˚C for 6 months, at -20˚C for 12 months. Avoid multiple freeze-thaw cycles(Shipped with wet ice.)|
|EK0392-CAP||96-well plate precoated with anti-Human IL1B antibody||1|
|EK0392-ST||lyophilized recombinant Human IL1B standard||1ng/tubex2|
|EK0392-DA||biotinylated anti-Human IL1B antibody||130ul(dilution 1:100)|
|AR1103||Avidin-Biotin-Peroxidase Complex(ABC)||130ul(dilution 1:100)|
|AR1106-1||sample diluent buffer||30ml|
|AR1106-2||antibody diluent buffer||12ml|
|AR1106-3||ABC diluent buffer||12ml|
|AR1104||TMB color developing agent||10ml|
|AR1105||TMB stop solution||10ml|
|AR0030-E||PBS washing buffer||Powder for 1000ml|
Washing buffer Preparation: Disolve AR0030-E to 1000ml distilled water and adjust pH to 7.2~7.6. Finally, adjust the total volume to 1L.
*Additional components can be purchased. If you need extra of the above components please order them together to avoid additional shipping charges.See Prices For Extra Components
Material Required But Not Provided
- 1. Microplate reader in standard size.
- 2. Automated plate washer.
- 3. Adjustable pipettes and pipette tips. Multichannel pipettes are recommended in the condition of large amount of samples in the detection.
- 4. Clean tubes and Eppendorf tubes.
Protein Target Info (Source: Uniprot.org)
You can check the tissue specificity below for information on selecting positive and negative control.
|Protein Name||Interleukin-1 beta|
|Molecular Weight||30748 MW|
|Protein Function||Produced by activated macrophages, IL-1 stimulates thymocyte proliferation by inducing IL-2 release, B-cell maturation and proliferation, and fibroblast growth factor activity. IL-1 proteins are involved in the inflammatory response, being identified as endogenous pyrogens, and are reported to stimulate the release of prostaglandin and collagenase from synovial cells. .|
|Sequence Similarities||Belongs to the IL-1 family.|
|Subcellular Localization||Secreted. The lack of a specific hydrophobic segment in the precursor sequence suggests that IL-1 is released by damaged cells or is secreted by a mechanism differing from that used for other secretory proteins.|
|Alternative Names||Interleukin-1 beta;IL-1 beta;Catabolin;IL1B;IL1F2;|
Background for Interleukin-1 beta
Human IL-1 Beta PicoKine™ ELISA Kit Images
Click the images to enlarge.
Intra/Inter Assay Precision
|Intra-Assay Precision||Inter-Assay Precision|
Typical Data Obtained from Human IL-1 Beta PicoKine™ ELISA Kit
(TMB reaction incubate at 37°C for 15-20min)
*The typical data is obtained from Boster's internal QC result and for reference only. It may differ from the lab test results of the end users. It is more important that the user's lab test results reflect the same linearity demonstrated in the typical data than achieving exactly the same O.D. values.
- Review by Milos Lazic
"Good quality budget option"
--Milos Lazic, JECURE THERAPEUTICS, SCIENTIST II
Applications ELISA Sample protein concentrations in cell culture media Detection --
"We are a pharmaceutical startup optimizing cell based drug assays where one of our endpoints was observing the differences in mature IL-1b production in the media. I have compared several kits from the most expensive versions of R&D, over eBioscience/Affymetrix to a more budget Boster's kit. The aim was to decide what is the best price for the value and quality we are getting for reliable and replicable ELISA analyses. This assay was used to test the effect of increasing concentrations of a drug on IL-1b levels (dose response). The kit reported similar data obtained from the other two kits (R&D and eBiosciences), with a slightly larger standard deviations. Results replicated the findings of the previous kits and the assay had good sensitivity/ instructions on how to perform assay and analyze data. I would use this assay in an academic lab for a project where no more than 2-3 96-well plates will be used. It should be done carefully by a scientist that has previously performed ELISA assays. There are many steps to it. It is a good quality budget option to the other leading kits on the market. I would not recommend it for a larger drug screen assay where more than 5 ELISAs kits ought to be used."