|Sample Type:||cell culture supernates, cell lysates, serum and plasma (heparin, EDTA).|
Data & Images
|Product Name||Human IL-1RA/IL1RN PicoKine™ ELISA Kit|
|Description||For quantitative detection of human IL-1RA in cell culture supernates, cell lysates, serum and plasma (heparin, EDTA).|
|Cite This Product||Human IL-1RA/IL1RN PicoKine™ ELISA Kit (Boster Biological Technology, Pleasanton CA, USA, Catalog # EK0782)|
*Our Boster Guarantee covers the use of this product in the above tested applications.
**For positive and negative control design, consult "Tissue specificity" under Protein Target Info.
|Immunogen||Expression system for standard: E.coli; Immunogen sequence: R26-E177|
|Cross Reactivity||There is no detectable cross-reactivity with other relevant proteins.|
*Sensitivity, or Lower Limit of Detection (LLD), is the minimum level of target protein the ELISA assay can detect. We measure 20 blank wells and if the O.D. value is 2 standard deviations higher than the blanks' average O.D. the sample can be deemed positive.
*This assay range is determined using common samples. For samples with low target protein concentrations, users can adjust the standard curve to extend the lower limit of assay range.
|Sample Type||cell culture supernates, cell lysates, serum and plasma (heparin, EDTA).
*The above listed samples are the ones valided with the assay. If you do not see your sample of interest listed, as long as there is enough level of target protein present in the sample, this Picokine™ ELISA kit should detect it.
**For protocol and tips regarding preparing your sample of interest, please check our ELISA sample preparation guide.
|Capture Antibody||monoclonal antibody from mouse|
|Detection Antibody||polyclonal antibody from goat|
|Natural Levels||Some research articles suggesting the natural levels of IL1RN are listed below:|
|Storage||Store at 4˚C for 6 months, at -20˚C for 12 months. Avoid multiple freeze-thaw cycles(Shipped with wet ice.)|
|EK0782-CAP||96-well plate precoated with anti-Human IL1RN antibody||1|
|EK0782-ST||lyophilized recombinant Human IL1RN standard||10ng/tubex2|
|EK0782-DA||biotinylated anti-Human IL1RN antibody||130ul(dilution 1:100)|
|AR1103||Avidin-Biotin-Peroxidase Complex(ABC)||130ul(dilution 1:100)|
|AR1106-1||sample diluent buffer||30ml|
|AR1106-2||antibody diluent buffer||12ml|
|AR1106-3||ABC diluent buffer||12ml|
|AR1104||TMB color developing agent||10ml|
|AR1105||TMB stop solution||10ml|
*Additional components can be purchased. If you need extra of the above components please order them together to avoid additional shipping charges.See Prices For Extra Components
Material Required But Not Provided
- 1. Microplate reader in standard size.
- 2. Automated plate washer.
- 3. Adjustable pipettes and pipette tips. Multichannel pipettes are recommended in the condition of large amount of samples in the detection.
- 4. Clean tubes and Eppendorf tubes.
- 5. Washing buffer (neutral PBS or TBS).
- Preparation of 0.01M TBS: Add 1.2g Tris, 8.5g Nacl; 450μl of purified acetic acid or 700μl of concentrated hydrochloric acid to 1000ml H2O and adjust pH to 7.2-7.6. Finally, adjust the total volume to 1L.
- Preparation of 0.01 M PBS: Add 8.5g sodium chloride, 1.4g Na2HPO4 and 0.2g NaH2PO4 to 1000ml distilled water and adjust pH to 7.2-7.6. Finally, adjust the total volume to 1L.
Protein Target Info (Source: Uniprot.org)
You can check the tissue specificity below for information on selecting positive and negative control.
|Protein Name||Interleukin-1 receptor antagonist protein|
|Molecular Weight||20055 MW|
|Protein Function||Inhibits the activity of interleukin-1 by binding to receptor IL1R1 and preventing its association with the coreceptor IL1RAP for signaling. Has no interleukin-1 like activity. Binds functional interleukin-1 receptor IL1R1 with greater affinity than decoy receptor IL1R2; however, the physiological relevance of the latter association is unsure. .|
|Tissue Specificity||The intracellular form of IL1RN is predominantly expressed in epithelial cells.|
|Subcellular Localization||Isoform 1: Secreted.|
|Alternative Names||Interleukin-1 receptor antagonist protein;IL-1RN;IL-1ra;IRAP;ICIL-1RA;IL1 inhibitor;Anakinra;IL1RN;IL1F3, IL1RA;|
|Research Areas|||immunology|innate immunity|cytokines|interleukins| kits/ lysates/ other|elisa kits|interleukin elisa kits|cytokines and cytokine receptors elisa kits||
Background for Interleukin-1 receptor antagonist protein
Human IL-1RA/IL1RN PicoKine™ ELISA Kit Images
Click the images to enlarge.
Intra/Inter Assay Precision
|Intra-Assay Precision||Inter-Assay Precision|
Typical Data Obtained from Human IL-1RA/IL1RN PicoKine™ ELISA Kit
(TMB reaction incubate at 37°C for 15-20min)
*The typical data is obtained from Boster's internal QC result and for reference only. It may differ from the lab test results of the end users. It is more important that the user's lab test results reflect the same linearity demonstrated in the typical data than achieving exactly the same O.D. values.
- Review by Unattributed Review*
--- Unattributed Review* (Reviews submitted to our site where we are unable to verify the identity of the author are considered “unattributed reviews".)
Applications IL-1RA detection in rat serum Sample Rat serum Detection --
"I used this kit to detect a recombinant IL1RA in rat serum and it worked very well. The procedure was easy to follow and my standard curve was right on target. If needed we will order this kit and use it again. The kit was able to detect our rIL1RA but was less sensitive in detecting an altered formulation of the protein."