Rat MIP-1Alpha/CCL3 PicoKine™ Fast ELISA Kit
|Size||96wells/kit, with removable strips.|
|Sample Type||cell culture supernates, serum and plasma(heparin, EDTA, citrate).|
|Sample Volume||100ul per well|
Boster's Picokine™ Fast ELISA kits features the high sensitivity of Picokine™ ELISA kits and the significantly reduced assay run time. Now you can run the entire ELISA assay in less than 1.5 hours.
Compared to regular Picokine ELISA kits, the following sections in the datasheet are different:
1. kit components;
2. preparation before experiment;
3. assay protocol
|Product Name||Rat MIP-1Alpha/CCL3 PicoKine™ Fast ELISA Kit|
|Storage & Handling||Store at 4°C for 6 months, at -20°C for 12 months. Avoid multiple freeze-thaw cycles(Shipped with wet ice.)|
|Size||96wells/kit, with removable strips.|
|Description||The Fast version of Picokine ELISA kits, assay takes less than 1.5 hours. Detect Rat Mip 1Alpha/CCL3 with <1pg/ml sensitivity. Format: 96-well plate with removable strips. Compatible samples: cell culture supernates, serum and plasma(heparin, EDTA, citrate). This is a TMB colorimetric sandwich ELISA kit with short assay time and fast experiment set up. Mip 1Alpha/CCL3 tissue specificity:|
|Cite This Product||Rat MIP-1Alpha/CCL3 PicoKine™ Fast ELISA Kit (Boster Biological Technology, Pleasanton CA, USA, Catalog # FEK1219)|
|Sample Type||cell culture supernates, serum and plasma(heparin, EDTA, citrate).
Anticoagulant(s): heparin, EDTA or Citrate
*The recommended anticoagulants are proven to not block the antibody binding sites on the target antigen. Please do not collect blood sample with other anticoagulants that are not specified above or contact us to check for feasibility.
|Immunogen||Expression system for standard: E.coli; Immunogen sequence: A24-A92|
|Cross Reactivity||There is no detectable cross-reactivity with other relevant proteins.|
|Antibody Clonalities||Capture Antibody | Detection Antibody:
monoclonal antibody from mouse|polyclonal antibody from goat
|FEK1219-CAP||96-well plate precoated with anti-Rat Ccl3 antibody||1|
|FEK1219-ST||lyophilized recombinant Rat Ccl3 standard||10ng/tube|
|FEK1219-DA||biotinylated anti-Rat Ccl3 antibody||130ul|
|AR1106-1||sample diluent buffer||30ml|
|AR1106-2||antibody diluent buffer||12ml|
|AR1106-3||ABC diluent buffer||12ml|
|AR1104||TMB color developing agent||10ml|
|AR1105||TMB stop solution||10ml|
*Why there is no wash buffer? Our Avidin-Biotin-Peroxidase Diluent contains the detergent (TWEEN) normally present in other companies' ELISA kits. This saves you the step of having to wash with the special wash buffer and achieve similar or better signal to noise ratio. The wash can use regular wash buffers (PBS, TBS etc.) commonly found in labs.
Materials Required But Not Provided
- Microplate reader in standard size.
- Automated plate washer.
- Adjustable pipettes and pipette tips. Multichannel pipettes are recommended in the condition of large amount of samples in the detection.
- Clean tubes and Eppendorf tubes.
- Washing buffer (neutral PBS or TBS).
- Preparation of 0.01M TBS: Add 1.2g Tris, 8.5g NaCl; 450μl of purified acetic acid or 700μl of concentrated hydrochloric acid to 1000ml H2
- Preparation of 0.01 M PBS: Add 8.5g sodium chloride, 1.4g Na O and adjust pH to 7.2-7.
Typical Data Obtained from Rat MIP-1Alpha/CCL3 PicoKine™ Fast ELISA Kit
(TMB reaction incubate at 37°C for 15-20min)
Intra/Inter Assay Precision
|Intra-Assay Precision||Inter-Assay Precision|
Three samples with differing target protein concentrations were assayed using four different lots to measure the CV% lot to lot variance.
To assay reproducibility, three samples with differing target protein concentrations were assayed using four different lots.
|Lots||Lot1 (pg/ml)||Lot2 (pg/ml)||Lot3 (pg/ml)||Lot4 (pg/ml)||Mean (pg/ml)||Standard Deviation||CV (%)|
*The typical data is obtained from Boster's internal QC result and for reference only. It may differ from the lab test results of the end users. It is more important that the user's lab test results reflect the same linearity demonstrated in the typical data than achieving exactly the same O.D. values.
Protein Target Info (Source: Uniprot.org)
|Protein Name||C-C motif chemokine 3|
|Alternative Names||C-C motif chemokine 3;Macrophage inflammatory protein 1-alpha;MIP-1-alpha;Small-inducible cytokine A3;Ccl3;Mip1a, Scya3;|
|Molecular Weight||10335 MW|
*if product is indicated to react with multiple species, protein info is based on the human gene.
|Protein Function||Monokine with inflammatory and chemokinetic properties. Has chemotactic activity for monocytes, neutrophils, eosinophils, basophils, and lymphocytes. Required for lung TNF-alpha production, neutrophil recruitment and subsequent lung injury and may function as an autocrine mediator for the macrophage production of TNF-alpha which in turn up-regulates vascular adhesion molecules required for neutrophil influx. This protein binds heparin.|
*You can search these to find other products in these research areas.
|Background||Macrophage inflammatory protein-1 alpha(MIP-1 alpha), also called CCL3, LD78. The cDNA for MIP-1 alpha predicts a mature peptide of 69 amino acids with a molecular mass of 7,889 daltons. LD78 is a member of a newly identified superfamily of small inducible proteins involved in inflammatory responses, wound healing and tumorigenesis. MIP-1 alpha is a chemokine that has pro-inflammatory and stem cell inhibitory activities in vitro. It constitutes an important second signal for mast cell degranulation in the conjunctiva in vivo and consequently for acute-phase disease.|
Other Recommended Resources
Here are featured tools and databases that you might find useful.
Download troubleshooting handbooks for IHC, Western blot and ELISA for FREE.Download Free PDFs Now
Guaranteed product quality
We promise all of our products perform as described in datasheets.