• Compare Products

  • Table of Contents

Customer Testimonials

Peer Reviews from Real Labs

Browse peer-submitted results linked to specific products—ratings, images, and practical notes included. Contribute your own result to strengthen the evidence base and claim rewards after verification.

Share Your Review Browse Reviews ↓

Video Interviews

See real workflows and decision points—what researchers tried, what worked, and why. Share your story in a short interview and claim rewards!

Get Interview Rewards

Filter by category, reactivity, and host to find the most relevant peer results.

Produced clear, sharp bands with no background. Excellent specificity and consistency across replicates. Ideal as a loading control for WB.

Excellent, submitted by on
SKU A01263
Application Western Blot
Sample Human 293T and A549 cell lysates, Mouse brain tissue
Sample Processing Description Cells were lysed in RIPA buffer containing protease inhibitors. Lysates were clarified by centrifugation and quantified using a BCA assay. 30–35 µg of protein was loaded per lane on a 5–20% SDS-PAGE gel and transferred to nitrocellulose membranes.
Primary Antibody Anti-beta Actin ACTB Antibody
Primary Incubation 1:1000, incubated overnight at 4°C.
Secondary Antibody Goat anti-rabbit IgG-HRP (Catalog # BA1054).
Secondary Incubation 1:5000 dilution, 1 hour at room temperature.
Other Reagents used 5% non-fat milk/TBST blocking buffer, ECL Plus substrate, Azure Biosystems c600 imaging system.
Detection Chemiluminescent detection. Strong single band observed at ~42 kDa, corresponding to beta actin.
Results Summary Produced clear, sharp bands with no background. Excellent specificity and consistency across replicates. Ideal as a loading control for WB.

This antibody is highly specific and efficient, suitable for Western blot detection of C1QBP protein in mouse liver and brown adipose tissue, with no nonspecific bands observed. However, due to experimental conditions and the particular characteristics of

Excellent, submitted by on
SKU M01439
Application Western Blot
Sample rat colon tissue
Sample Processing Description RIPA lysis buffer with protease inhibitor PMSF (100:1) was used to lyse the sample for 10 minutes, followed by centrifugation at 12,000 rpm for 15 minutes. The supernatant was mixed with 5× loading buffer, denatured at 100°C for 10 minutes, and then loaded onto SDS-PAGE.
Other Reagents Blocking buffer
Primary Antibody Anti-GC1q R Rabbit Monoclonal Antibody
Primary Incubation 1:1000, overnight at 4 ℃
Secondary Antibody HRP Conjugated AffiniPure Goat Anti-Rabbit IgG (H+L)
Secondary Incubation 1:5000, 1 hour in room temperature
Detection Substrate: ECL, Imaging system:ChemiDoc MP
Results Summary The figure shows Western blot results of the target protein and the loading control in mouse liver and brown adipose tissue from normal and treated groups, with or without enzymatic digestion. The target bands in the liver are clear and well defined, and the experimental results are satisfactory.

This antibody is highly specific and efficient, suitable for detecting STAT3 protein in rat colon by Western blot, with clear results.

Excellent, submitted by on
SKU M00007
Application Western Blot
Sample rat colon tissue
Sample Processing Description RIPA lysis buffer with protease inhibitor PMSF (100:1) was used to lyse the sample for 10 minutes, followed by centrifugation at 12,000 rpm for 15 minutes. The supernatant was mixed with 5× loading buffer, denatured at 100°C for 10 minutes, and then loaded onto SDS-PAGE.
Other Reagents Blocking buffer
Primary Antibody Phospho-STAT3 (Y705) Rabbit Monoclonal Antibody
Primary Incubation 1:1000, overnight at 4 ℃
Secondary Antibody HRP Conjugated AffiniPure Goat Anti-Rabbit IgG (H+L)
Secondary Incubation 1:5000, 1 hour in room temperature
Detection Substrate: ECL, Imaging system:ChemiDoc MP
Results Summary The figure shows Western blot results of the target protein STAT3 and the loading control Actin in the colon of normal rats, model rats, low/medium/high dose Chinese medicine treatment groups, and Western medicine treatment group. No differences were observed between the groups. The target bands are clear and distinct, and the experimental results are satisfactory.

This antibody is highly efficient and specific, suitable for Western blot detection of STAT3 (Phospho-Y705) protein in rat colon tissue, with only minor nonspecific bands observed.

Excellent, submitted by on
SKU P00007-2
Application Western Blot
Sample rat colon tissue
Sample Processing Description RIPA lysis buffer with protease inhibitor PMSF (100:1) was used to lyse the sample for 10 minutes, followed by centrifugation at 12,000 rpm for 15 minutes. The supernatant was mixed with 5× loading buffer, denatured at 100°C for 10 minutes, and then loaded onto SDS-PAGE.
Other Reagents Blocking buffer
Primary Antibody Phospho-STAT3 (Y705) Rabbit Monoclonal Antibody
Primary Incubation 1:1000, overnight at 4 ℃
Secondary Antibody HRP Conjugated AffiniPure Goat Anti-Rabbit IgG (H+L)
Secondary Incubation 1:5000, 1 hour in room temperature
Detection Substrate: ECL, Imaging system:ChemiDoc MP
Results Summary The figure shows representative Western blot results of the target protein STAT3 (Phospho-Y705) and the internal control Actin in rat colon tissue from the normal control group, disease model group, low-, medium-, and high-dose traditional Chinese medicine–treated groups, and the western medicine–treated group. The target bands are clear and well defined, and the experimental results are satisfactory.

This antibody is highly efficient and specific, suitable for Western blot detection of SLC6A4 protein in rat colon tissue, with only slight nonspecific bands observed.

Excellent, submitted by on
SKU PB9438
Application Western Blot
Sample rat colon tissue
Sample Processing Description RIPA lysis buffer with protease inhibitor PMSF (100:1) was used to lyse the sample for 10 minutes, followed by centrifugation at 12,000 rpm for 15 minutes. The supernatant was mixed with 5× loading buffer, denatured at 100°C for 10 minutes, and then loaded onto SDS-PAGE.
Other Reagents Blocking buffer
Primary Antibody Serotonin transporter/SLC6A4 Antibody Picoband®
Primary Incubation 1:1000, overnight at 4 ℃
Secondary Antibody HRP Conjugated AffiniPure Goat Anti-Rabbit IgG (H+L)
Secondary Incubation 1:5000, 1 hour in room temperature
Detection Substrate: ECL, Imaging system:ChemiDoc MP
Results Summary The figure shows representative Western blot results of the target protein SLC6A4 and the internal control Actin in rat colon tissue from the normal control group, disease model group, low-, medium-, and high-dose traditional Chinese medicine–treated groups, and the western medicine–treated group. The target bands are clear and well defined, and the experimental results are satisfactory.

The antibody is highly specific and efficient, suitable for detecting ROCK2 protein in rat colon by Western blot, with only minimal non-specific bands.

Excellent, submitted by on
SKU PB9387
Application Western Blot
Sample rat colon tissue
Sample Processing Description RIPA lysis buffer with protease inhibitor PMSF (100:1) was used to lyse the sample for 10 minutes, followed by centrifugation at 12,000 rpm for 15 minutes. The supernatant was mixed with 5× loading buffer, denatured at 100°C for 10 minutes, and then loaded onto SDS-PAGE.
Other Reagents Blocking buffer
Primary Antibody ROCK2 Antibody Picoband®
Primary Incubation 1:1000, overnight at 4 ℃
Secondary Antibody HRP Conjugated AffiniPure Goat Anti-Rabbit IgG (H+L)
Secondary Incubation 1:5000, 1 hour in room temperature
Detection Substrate: ECL, Imaging system:ChemiDoc MP
Results Summary The figure shows the Western blot results of the target protein ROCK2 and the internal control Actin in rat colon across the following groups: normal, disease model, low/middle/high dose traditional Chinese medicine treatment, and Western medicine treatment. Expression was increased in the model group. Among the traditional Chinese medicine treatments, the high-dose group showed the best effect. The target bands are clear and distinct, and the experimental results are satisfactory.

This antibody is highly specific and efficient, suitable for detecting RHOA/B/C protein in rat colon by Western blot, with only minimal non-specific bands.

Excellent, submitted by on
SKU M00207-1
Application Western Blot
Sample rat colon tissue
Sample Processing Description RIPA lysis buffer with protease inhibitor PMSF (100:1) was used to lyse the sample for 10 minutes, followed by centrifugation at 12,000 rpm for 15 minutes. The supernatant was mixed with 5× loading buffer, denatured at 100°C for 10 minutes, and then loaded onto SDS-PAGE.
Other Reagents Blocking buffer
Primary Antibody Rho A + B + C Rabbit Monoclonal Antibody
Primary Incubation 1:1000, overnight at 4 ℃
Secondary Antibody HRP Conjugated AffiniPure Goat Anti-Rabbit IgG (H+L)
Secondary Incubation 1:5000, 1 hour in room temperature
Detection Substrate: ECL, Imaging system:ChemiDoc MP
Results Summary The figure shows the Western blot results of the target protein RHOA/B/C and the internal control Actin in rat colon tissue across the following groups: normal, disease model, low/middle/high dose traditional Chinese medicine treatment, and Western medicine treatment. The target bands are clear and distinct, and the experimental results are satisfactory.

A strong nuclear signal for Cyclin E was observed in proliferating cells by IF . Results were reproducible and matched expected patterns.

Excellent, submitted by on
SKU DZ41312
Application Immunofluorescence
Sample Human HaCaT cell
Sample Processing Description Cells were fixed in 4% paraformaldehyde for 15 minutes at room temperature, permeabilized with 0.1% Triton X-100 for 10 minutes and blocked in 1% BSA for 1 hour before incubation with the primary antibody.
Primary Antibody Human CCNE1 Antibody
Primary Incubation 1:100-1:200, overnight at 4 ℃
Secondary Antibody Goat anti-rabbit IgG conjugated to Alexa Fluor 488
Secondary Incubation 1:1000, 1-2 hours in room temperature
Other Reagents used PBS, 0.1% Triton X-100, 1% BSA, DAPI for nuclear counterstaining
Detection Fluorescence microscopy using Alexa Fluor 488 (excitation 488 nm, emission 519 nm) Using Confocal Microscope Zeiss LSM 900
Results Summary The CyclinE-FL antibody (DZ41312) worked in IF application using human cell lines. In IF, the nuclear localization of Cyclin E matched the known expression pattern with good specificity. A fluorescent secondary antibody (Alexa Fluor 488) was used for detection and gave clear signal. Overall, a reliable antibody for full length Cyclin E detection in human cell systems.

This antibody is highly efficient and specific, suitable for Western blot detection of PTEN protein in rat colon tissue, with only minor nonspecific bands.

Excellent, submitted by on
SKU M00006-2
Application Western Blot
Sample rat colon tissue
Sample Processing Description RIPA lysis buffer with protease inhibitor PMSF (100:1) was used to lyse the sample for 10 minutes, followed by centrifugation at 12,000 rpm for 15 minutes. The supernatant was mixed with 5× loading buffer, denatured at 100°C for 10 minutes, and then loaded onto SDS-PAGE.
Other Reagents Blocking buffer
Primary Antibody PTEN Rabbit Monoclonal Antibody
Primary Incubation 1:1000, overnight at 4 ℃
Secondary Antibody HRP Conjugated AffiniPure Goat Anti-Rabbit IgG (H+L)
Secondary Incubation 1:5000, 1 hour in room temperature
Detection Substrate: ECL, Imaging system:ChemiDoc MP
Results Summary The figure shows a schematic of Western blot results for the target protein PTEN and the internal control Actin in rat colon across different groups. Expression was increased in the model group. Among the low, medium, and high doses of the herbal treatment, the low-dose group showed the best effect. The target bands are clear, and the experimental results are satisfactory.

A strong nuclear signal for Cyclin E was observed in proliferating cells by IF. Results were reproducible and matched the expected patterns.

Excellent, submitted by on
SKU DZ41311
Application Immunofluorescence
Sample Human HaCaT cell
Sample Processing Description Cells were fixed in 4% paraformaldehyde for 15 minutes at room temperature, permeabilized with 0.1% Triton X-100 for 10 minutes and blocked in 1% BSA for 1 hour before incubation with the primary antibody.
Primary Antibody Human CCNE1 Antibody
Primary Incubation 1:100-1:200, overnight at 4 ℃
Secondary Antibody Goat anti-rabbit IgG conjugated to Alexa Fluor 488
Secondary Incubation 1:1000, 1-2 hours in room temperature
Detection Fluorescence microscopy using Alexa Fluor 488 (excitation 488 nm, emission 519 nm) Using Confocal Microscope Zeiss LSM 900
Results Summary The CyclinE-D15 antibody (DZ41311) worked well in IF application using human cell lines. In IF, the nuclear localization of Cyclin E matched the known expression pattern. The antibody showed good specificity with a minimal background. A fluorescent secondary antibody (Alexa Fluor 488) was used for detection and gave strong, clear signal. Overall, a reliable antibody for Cyclin E detection in human cell systems.