• Compare Products

  • Table of Contents

Customer Testimonials

Peer Reviews from Real Labs

Browse peer-submitted results linked to specific products—ratings, images, and practical notes included. Contribute your own result to strengthen the evidence base and claim rewards after verification.

Share Your Review Browse Reviews ↓

Video Interviews

See real workflows and decision points—what researchers tried, what worked, and why. Share your story in a short interview and claim rewards!

Get Interview Rewards

Filter by category, reactivity, and host to find the most relevant peer results.

Accurate localization and good imaging quality

Excellent, submitted by on
SKU PB9640
Application Immunofluorenscence
Sample Mouse 4T1 cell climbing slides
Sample Processing Description Mouse 4T1 cells fixed with 4% paraformaldehyde for 15 minutes
Primary Antibody Anti-GRP78 antibody
Primary Incubation 1:400, overnight at 4 ℃
Blocking Agent Goat serum
Secondary Antibody DyLight 550-conjugated goat anti-rabbit antibody.
Secondary Incubation Incubate at room temperature for 1 hour
Detection Laser confocal microscopy
Results Summary The ordering and delivery cycle of the antibodies is short — I was able to receive the products within a week, which saved a lot of time. The pre-sales and after-sales services are convenient and efficient. Since my background is in chemistry, I consulted Boster’s technical staff about many details of biological experiments. The technical specialists were patient and helpful in their analysis and explanations, which allowed me to avoid many detours during the actual experimental procedures. Most importantly, these antibodies offer a high cost-performance ratio, with good binding performance, excellent imaging results, and a high experimental success rate, providing a solid foundation for conducting related experiments.

Accurate localization and good imaging quality

Excellent, submitted by on
SKU PA1239
Application Immunofluorenscence
Sample Rat Brain
Sample Processing Description Fixed in 4% paraformaldehyde for 48 hours, followed by paraffin embedding and sectioning.
Primary Antibody Anti-GFAP antibody
Primary Incubation 1:500, overnight at 4 ℃
Blocking Agent Goat serum
Secondary Antibody DyLight 550-conjugated goat anti-rabbit antibody.
Secondary Incubation Incubate at room temperature for 1 hour
Detection Laser confocal microscopy
Results Summary During the experiment, this primary antibody can be conveniently used with the complimentary antibody diluent provided. The results obtained showed good quality and reproducibility, with no false-positive signals. Overall, this primary antibody offers excellent cost performance and provides key data and strong support for publication.

This antibody exhibits high specificity, an excellent signal-to-noise ratio, and clear, stable staining, and has been successfully applied in immunofluorescent labeling of mouse cartilage tissue.

Excellent, submitted by on
SKU PA2141-1
Application Immunofluorescence
Sample mouse cartilage tissue
Sample Processing Description Freshly dissected bone samples were first fixed overnight in 4% paraformaldehyde (PFA), followed by decalcification for 3 days in 10% ethylenediaminetetraacetic acid (EDTA) solution, and then dehydrated for 1 day in 30% sucrose solution. The bone samples were subsequently embedded in optimal cutting temperature compound (OCT; Sakura, Cat. No. OCT-4583) and cryosectioned at a thickness of 10 μm using a Leica CryoJane cryostat.
Primary Antibody Anti-Collagen II/COL2A1 Antibody Picoband®
Primary Incubation 1:100, overnight at 4 °C.
Secondary Antibody donkey anti-rabbit Alexa Fluor 555 Secondary Antibody
Secondary Incubation 1:500, Incubate at room temperature for 1 hour
Other Reagents used PBS with 10% horse serum, DAPI
Detection fluorescence microscope (Leica)
Results Summary I will purchase BosterBio products again and recommend them to my classmates and colleagues.

Accurate localization and good imaging performance.

Excellent, submitted by on
SKU PB9093
Application Immunofluorenscence
Sample Mouse 4T1 cell xenograft tumor
Sample Processing Description Fixed in 4% paraformaldehyde for 48 hours, followed by paraffin embedding and sectioning.
Primary Incubation 1:200, overnight at 4 ℃
Blocking Agent Goat serum
Secondary Antibody DyLight 550-conjugated goat anti-rabbit antibody.
Secondary Incubation Incubate at room temperature for 1 hour
Detection Laser confocal microscopy
Results Summary The delivery time for antibodies is impressively fast — I usually receive the products within a week, which saves me a lot of valuable time. Both the pre-sales and after-sales support are efficient and reliable. Since my background is in chemistry, I often consulted Boster’s technical specialists about various details of biological experiments. They were always patient and thorough in their explanations, helping me avoid many detours during my experiments. Most importantly, these antibodies offer excellent value for money — they have strong binding performance, produce clear imaging results, and ensure a high experiment success rate, which has provided a solid foundation for my research.

In this study, this antibody was mainly used for Western Blot experiments. In the Western Blot results, the CCT3 antibody showed a clear and specific target band and maintained a strong signal even after multiple rounds of reuse.

Excellent, submitted by on
SKU PB9926
Application Western Blot
Sample U2OS cells
Primary Incubation 1:1000
Blocking Agent BSA
Secondary Antibody Anti-Rabbit IgG Secondary Antibody, HRP-conjugated
Results Summary I will definitely purchase BosterBio products again and recommend them to my classmates and colleagues.

The antibody is highly efficient and specific, showing a clear target band with no non-specific bands.

Excellent, submitted by on
SKU A01263
Application Western Blot
Sample HEK293T
Blocking Agent 5% Non-fat milk
Primary Incubation 1:1000, overnight at 4 ℃
Secondary Antibody Anti-Rabbit IgG Secondary Antibody, HRP-conjugated
Secondary Incubation Incubate at room temperature for 1 hour
Detection Azure Biosystems c600, ECL substrate
Results Summary I will definitely purchase BosterBio products again and recommend them to my classmates and colleagues.

The antibody performs efficiently and specifically, with very few nonspecific bands.

Excellent, submitted by on
WB result image
SKU A03213-2
Application Western Blot
Sample MCF-7 cell
Sample Processing Description Cells were directly lysed in NP-40 buffer, mixed with loading buffer at the appropriate ratio, and denatured by heating at 98 °C. Then, 20 µL of protein sample was loaded per lane onto SDS-PAGE.
Primary Antibody UBA6 Antibody
Primary Incubation 1:1000, overnight at 4 °C
Blocking Agent 5% Non-fat milk
Secondary Antibody HRP-conjugated Goat Anti-Rabbit IgG
Secondary Incubation Incubate at room temperature for 1 hour
Detection Signal was developed using ECL substrate on a Tanon system.
Results Summary The antibody performs efficiently and specifically, with very few nonspecific bands.

This antibody shows excellent consistency and reproducibility across batches, ensuring reliable and stable experimental results. Its performance remains consistent across different experiments, providing strong technical support for our research.

Excellent, submitted by on
PA1079 wb
SKU PA1079
Application Western Blot
Sample Mouse lung tissue
Sample Processing Description Tissue samples were directly lysed in RIPA buffer, mixed with loading buffer at the appropriate ratio, and denatured by heating at 98 °C. Load 20 µL of protein sample per lane onto SDS-PAGE.
Primary Incubation The membrane was incubated with TNF-α primary antibodies (1:1000) overnight at 4 °C.
Secondary Antibody HRP-conjugated Goat Anti-Rabbit IgG Secondary Antibody
Secondary Incubation Incubate at room temperature for 1 hour
Other Reagents used 5% Non-fat milk
Detection Signal was developed using ECL substrate on an ChemiDoc MP system.
Results Summary This antibody shows excellent consistency and reproducibility across batches, ensuring reliable and stable experimental results. Its performance remains consistent across different experiments, providing strong technical support for our research.

The antibody is highly efficient and specific, showing a clear target band with no nonspecific bands.

Excellent, submitted by on
SKU M00220-1
Application Western Blot
Sample Mouse lung cancer tissue
Sample Processing Description Tissue samples were directly lysed in RIPA buffer, mixed with loading buffer at the appropriate ratio, and denatured by heating at 98 °C. Load 20 µL of protein sample per lane onto SDS-PAGE.
Primary Incubation The membrane was incubated with the CD86 primary antibodies (1:2000) overnight at 4 °C.
Secondary Antibody HRP-conjugated Goat Anti-Rabbit IgG Secondary Antibody
Secondary Incubation Incubate at room temperature for 1 hour
Other Reagents used 5% non-fat milk
Detection Signal was developed using ECL substrate on an Tanon system.
Results Summary The antibody is highly efficient and specific, showing a clear target band with no nonspecific bands. I will definitely continue using BosterBio products and will recommend them to my classmates and colleagues.

Works very well in Western blot for rat enteric glial cells and mouse FGL-2 protein, with only slight nonspecific bands.

Excellent, submitted by on
SKU A06303-3
Application Western Blot
Sample rat enteric glial cells and mouse tissue
Sample Processing Description Samples (5 µL per lane) were run on 10% resolving and stacking gels at 80 V for 20 min, then 150 V for 70 min, and transferred at 400 mA for 100 min.
Primary Incubation The membrane was incubated with the FGL-2 primary antibody (1:1000) overnight at 4 °C.
Secondary Antibody HRP-conjugated Goat Anti-Rabbit IgG Secondary Antibody
Secondary Incubation Incubate at room temperature for 2 hour
Other Reagents used 5% non-fat milk
Detection Signal was developed using ECL substrate on an ImageQuant LAS4000mini system.
Results Summary Works very well in Western blot for rat enteric glial cells and mouse FGL-2 protein, with only slight nonspecific bands.