• Compare Products

  • Table of Contents

Customer Testimonials

Peer Reviews from Real Labs

Browse peer-submitted results linked to specific products—ratings, images, and practical notes included. Contribute your own result to strengthen the evidence base and claim rewards after verification.

Share Your Review Browse Reviews ↓

Video Interviews

See real workflows and decision points—what researchers tried, what worked, and why. Share your story in a short interview and claim rewards!

Get Interview Rewards

Filter by category, reactivity, and host to find the most relevant peer results.

This antibody is highly specific and efficient, with a clean background and no nonspecific bands. The target band has well-defined edges.

Excellent, submitted by on
SKU P00003
Application Western Blot
Sample human OCI-LY1 cell
Sample Processing Description Cell samples were lysed by sonication in RIPA buffer containing protease and phosphatase inhibitors, followed by centrifugation for 10 minutes. The supernatant was mixed with loading buffer at a 4:1 ratio and boiled for 10 minutes. Fifteen microliters of each sample were loaded per well.
Other Reagents 5% Non-fat milk
Primary Antibody Phospho-mTOR (S2448) Rabbit Monoclonal Antibody
Primary Incubation 1:3000, overnight at 4 ℃
Secondary Antibody HRP-conjugated Anti-Rabbit IgG Secondary Antibody
Secondary Incubation 1 hour in room temperature
Detection Substrate: ECL reagent, Imaging system:ChemiDoc MP
Results Summary This antibody is highly specific and efficient, with a clean background and no nonspecific bands. The target band has sharp and well-defined edges.

This antibody is highly specific and efficient, with a clear target band and no nonspecific bands.

Excellent, submitted by on
SKU M00220-1
Application Western Blot
Sample mouse lung cancer tissue
Sample Processing Description Tissue samples were directly lysed in RIPA buffer, mixed with loading buffer at the appropriate ratio, and denatured by heating at 98°C. Twenty microliters of each protein sample were loaded per lane onto an SDS-PAGE gel.
Other Reagents 5% Non-fat milk
Primary Antibody CD86/B7 2 Rabbit Monoclonal Antibody
Primary Incubation 1:2000, overnight at 4 ℃
Secondary Antibody HRP-conjugated Anti-Rabbit IgG Secondary Antibody
Secondary Incubation 1 hour in room temperature
Detection Substrate: ECL reagent, Imaging system:Tanon
Results Summary This antibody is highly specific and efficient, with a clear target band and no nonspecific bands.

The Anti-Cytokeratin antibody (M02416-2) produced clear and specific target bands in WB analysis of untreated and drug-treated HTR8 cells, demonstrating reliable and consistent detection without non-specific signals.

Excellent, submitted by on
SKU M02416-2
Application Western Blot
Sample human HTR8 cells
Sample Processing Description Cells were lysed with RIPA lysis buffer, mixed with β-mercaptoethanol, denatured at 100°C for 10 minutes, and then loaded onto SDS-PAGE.
Other Reagents blocking buffer
Primary Antibody Cytokeratin 7 KRT7 Rabbit Monoclonal Antibody
Primary Incubation 1:1000, overnight at 4 ℃
Secondary Antibody HRP-conjugated Anti-Rabbit IgG Secondary Antibody
Secondary Incubation 1 hour in room temperature
Detection Substrate: ECL reagent, Imaging system:ChemiDoc MP
Results Summary The figure shows WB results of Cytokeratin in untreated and drug-treated HTR8 cells, with clear and distinct bands at the expected position, demonstrating reliable and specific detection.

This antibody is suitable for detecting PTEN protein in mouse hippocampus by Western blot, showing clear, distinct, and highly specific bands.

Excellent, submitted by on
SKU M00006-1
Application Western Blot
Sample Mouse hippocampus tissue
Sample Processing Description The mouse hippocampus was lysed with RIPA buffer containing a protease inhibitor cocktail. After protein quantification, samples were mixed with 5× protein loading buffer and heated for 10 minutes to denature. Load 5 μL of protein per lane and apply to SDS-PAGE.
Other Reagents 5% Non-fat milk
Primary Antibody Anti-PTEN Rabbit Monoclonal Antibody
Primary Incubation overnight at 4 ℃
Secondary Antibody HRP-conjugated Anti-Rabbit IgG Secondary Antibody
Secondary Incubation 1 hour in room temperature
Detection Substrate: Ultra-sensitive ECL luminescent reagent, Imaging system:ChemiDoc MP
Results Summary This antibody is suitable for detecting PTEN protein in mouse hippocampus by Western blot, showing clear, distinct, and highly specific bands.

The GPX4 antibody was used to detect the expression of the protein in mouse uterine tissue. The WB results showed clear bands, and the antibody could be reused after recovery with good performance, offering excellent cost-effectiveness.

Excellent, submitted by on
SKU M02059
Application Western Blot
Sample Mouse Uterus tissue
Sample Processing Description The GPX4 antibody was used to detect the expression of the protein in mouse uterine tissue. The Western blot results showed clear bands, and the antibody retained good performance after reuse, offering excellent cost-effectiveness.
Primary Antibody Anti-GPX4 Rabbit Monoclonal Antibody
Primary Incubation overnight at 4 ℃
Secondary Antibody HRP-conjugated Anti-Rabbit IgG Secondary Antibody
Secondary Incubation 1 hour in room temperature
Detection Substrate: Ultra-sensitive ECL luminescent reagent (Cat# AR1191), Imaging system:Tanon
The GPX4 antibody was used to detect the protein expression in mouse uterine tissue. The Western blot results showed clear bands, and the antibody maintained good performance after reuse, providing excellent cost-effectiveness.

The FTH1 antibody was used to detect the expression of the target protein in human uterine tissue. The WB bands were single and clear, and compared with other domestic and international brands, this antibody offers excellent cost-performance.

Excellent, submitted by on
SKU M02401
Application Western Blot
Sample Mouse hippocampus tissue
Sample Processing Description The tissue was minced and sonicated, then lysed on ice for 1 hour using RIPA buffer. After centrifugation to collect the supernatant and protein quantification by BCA, samples were mixed with loading buffer at the appropriate ratio and denatured by boiling in a water bath. Fifteen microliters of each protein sample were loaded per lane onto SDS-PAGE gel.
Primary Antibody Anti-Ferritin FTH1 Rabbit Monoclonal Antibody
Primary Incubation overnight at 4 ℃
Secondary Antibody HRP-conjugated Anti-Rabbit IgG Secondary Antibody
Secondary Incubation 1 hour in room temperature
Detection Substrate: Ultra-sensitive ECL luminescent reagent (Cat# AR1191), Imaging system:Tanon
Results Summary The FTH1 antibody was used to detect the expression of the target protein in human uterine tissue. The WB bands were single and clear, and compared with other domestic and international brands, this antibody offers excellent cost-performance.

Western blot analysis was performed using the COL6A1 antibody to detect COL6A1 protein expression in the mouse hippocampus.

Excellent, submitted by on
SKU M02226
Application Western Blot
Sample Mouse hippocampus tissue
Sample Processing Description The mouse hippocampus was lysed in RIPA buffer supplemented with a protease inhibitor cocktail. After protein quantification, samples were mixed with 5× protein loading buffer and denatured by heating at 100°C for 10 minutes. Five microliters of each protein sample were loaded per lane onto SDS-PAGE.
Primary Antibody Anti-Collagen VI COL6A1 Rabbit Monoclonal Antibody
Primary Incubation overnight at 4 ℃
Secondary Antibody HRP-conjugated Anti-Rabbit IgG Secondary Antibody
Secondary Incubation 1 hour in room temperature
Detection Substrate: Ultra-sensitive ECL luminescent reagent (Cat# AR1191), Imaging system:ChemiDoc MP
Results Summary Western blot analysis was performed using the COL6A1 antibody to detect COL6A1 protein expression in the mouse hippocampus. Although minor non-specific bands were observed, they did not affect the trend analysis, indicating that the antibody is suitable for detecting the target protein in this tissue.

Highly prone to positive signals, with precise expression localization

Excellent, submitted by on
SKU M00656
Application Immunofluorenscence
Sample Mouse MC-8 cells
Sample Processing Description 4% paraformaldehyde for 15 minutes
Primary Antibody Anti-MMP14/Mt1 Mmp Rabbit Monoclonal Antibody
Primary Incubation 1:200, overnight at 4 ℃
Blocking Agent Goat serum
Secondary Antibody DyLight 488-conjugated Goat Anti-Rabbit IgG.
Secondary Incubation Incubate at room temperature for 1 hour
Detection Laser confocal microscopy
Results Summary I will purchase Boster products again and recommend them to my classmates and colleagues.

The antibody is highly efficient and specific, showing a clear target band with no nonspecific bands.

Excellent, submitted by on
SKU M00220-1
Application Western Blot
Sample Mouse lung cancer tissue
Sample Processing Description Tissue samples were directly lysed in RIPA buffer, mixed with loading buffer at the appropriate ratio, and denatured by heating at 98 °C. Load 20 µL of protein sample per lane onto SDS-PAGE.
Primary Incubation The membrane was incubated with the CD86 primary antibodies (1:2000) overnight at 4 °C.
Secondary Antibody HRP-conjugated Goat Anti-Rabbit IgG Secondary Antibody
Secondary Incubation Incubate at room temperature for 1 hour
Other Reagents used 5% non-fat milk
Detection Signal was developed using ECL substrate on an Tanon system.
Results Summary The antibody is highly efficient and specific, showing a clear target band with no nonspecific bands. I will definitely continue using BosterBio products and will recommend them to my classmates and colleagues.

Immunocytochemistry for Anti-E Cadherin 1/CDH1 Antibody

Excellent, submitted by on
PB9561 Immunohistochemistry

The antibody worked perfectly, Great sensitivity

SKU PB9561
Application Immunohistochemistry (paraffin-embedded)
Blocking step 5% BSA as a blocking agent for 30 min at 37°C
SampleMouse Liver
Fixative Fixed with 4% paraformaldehyde
Primary Ab Incubation 4°C overnight
Primary Ab Incubation diluent 5% BSA in TBS
Primary Ab Concentration 2ug/ml
Secondary Antibody SABC kit from Boster Bio, (SA1022)
Secondary Ab Dilution The kit was ready to use, no dilution needed
Secondary Ab Incubation 4°C overnight