Customer Testimonials

Peer Reviews from Real Labs

Browse peer-submitted results linked to specific products—ratings, images, and practical notes included. Contribute your own result to strengthen the evidence base and claim rewards after verification.

Video Interviews

See real workflows and decision points—what researchers tried, what worked, and why. Share your story in a short interview and claim rewards!

Get Interview Rewards

Filter by category, reactivity, and host to find the most relevant peer results.

The antibody shows a clear target band, correct positioning, minimal background, and overall good results.

Excellent, submitted by on
SKU PB9253
Application Western Blot
Sample mouse 4T1 cells
Sample Processing Description normal 4T1 cells, LPS-stimulated 4T1 cells, cells treated with low, medium, or high doses of the drug, and cells treated with a positive control drug.
Other Reagents RIPA lysis buffer, Protease inhibitor, Electrophoresis buffer, Transfer buffer, Blocking buffer
Primary Antibody HIF-1-alpha/HIF1A Antibody Picoband®
Primary Incubation 1:2500, overnight at 4 ℃
Secondary Antibody HRP Goat Anti-Rabbit IgG
Secondary Incubation 1:10000, 1 hour in room temperature
Detection Substrate: ECL, Imaging system:ChemiDoc MP
Results Summary With equal loading amounts, the HIF1A protein levels showed clear differences among the groups: the blank group had the lowest level, the model group the highest, and in the drug-treated groups, the levels decreased sequentially from low, medium, to high dose. The positive control group was comparable to the high-dose group.

The antibody shows a clear target band, correct localization, minimal background, and overall good results.

Excellent, submitted by on
SKU P00003
Application Western Blot
Sample mouse 4T1 cells
Sample Processing Description normal 4T1 cells, LPS-stimulated 4T1 cells, cells treated with low, medium, or high doses of the drug, and cells treated with a positive control drug.
Other Reagents RIPA lysis buffer, Protease inhibitor, Electrophoresis buffer, Transfer buffer, Blocking buffer
Primary Antibody Anti-Phospho-mTOR (S2448) Rabbit Monoclonal Antibody
Primary Incubation 1:2500, overnight at 4 ℃
Secondary Antibody HRP Goat Anti-Rabbit IgG
Secondary Incubation 1:10000, 1 hour in room temperature
Detection Substrate: ECL, Imaging system:ChemiDoc MP
Results Summary With equal loading amounts, total MTOR protein levels were similar across all groups. However, phosphorylated MTOR levels showed significant changes: the blank group was the lowest, the model group the highest, and in the drug-treated groups, phosphorylation decreased sequentially from low, medium, to high dose. The positive control group was comparable to the high-dose group.

The antibody shows a clear target, correct localization, minimal background, and overall good results.

Excellent, submitted by on
SKU P00024-4
Application Western Blot
Sample mouse 4T1 cells
Sample Processing Description normal 4T1 cells, LPS-stimulated 4T1 cells, cells treated with low, medium, or high doses of the drug, and cells treated with a positive control drug.
Other Reagents RIPA lysis buffer, Protease inhibitor, Electrophoresis buffer, Transfer buffer, Blocking buffer
Primary Antibody Anti-AKT1,2,3 Antibody Picoband®
Primary Incubation 1:10000, overnight at 4 ℃
Secondary Antibody HRP Goat Anti-Rabbit IgG
Secondary Incubation 1:10000, 1 hour in room temperature
Detection Substrate: ECL, Imaging system:ChemiDoc MP
Results Summary Under equal loading conditions, the total AKT protein levels were similar across all groups, while the amount of phosphorylated AKT1 showed significant changes. The blank group had the lowest level, the model group had the highest, and in the drug-treated groups, the levels decreased progressively from low to medium to high dose. The positive control drug group was close to the high-dose group.

The antibody shows a clear target, correct localization, minimal background, and overall good results.

Excellent, submitted by on
SKU M00003
Application Western Blot
Sample mouse 4T1 cells
Sample Processing Description normal 4T1 cells, LPS-stimulated 4T1 cells, cells treated with low, medium, or high doses of the drug, and cells treated with a positive control drug.
Other Reagents RIPA lysis buffer, Protease inhibitor, Electrophoresis buffer, Transfer buffer, Blocking buffer
Primary Antibody Anti-ATF4 Rabbit Monoclonal Antibody
Primary Incubation 1:10000, overnight at 4 ℃
Secondary Antibody HRP Goat Anti-Rabbit IgG
Secondary Incubation 1:10000, 1 hour in room temperature
Detection Substrate: ECL, Imaging system:ChemiDoc MP
Results Summary With equal loading amounts, the total MTOR protein levels were similar across all groups. However, the levels of phosphorylated MTOR showed significant changes: the blank group had the lowest, the model group the highest, and in the drug-treated groups, the phosphorylation levels decreased sequentially from low, medium, to high dose. The positive control group was comparable to the high-dose group.

Cell samples were lysed by sonication in RIPA buffer containing protease and phosphatase inhibitors, followed by centrifugation for 10 minutes. The supernatant was mixed with loading buffer at a 4:1 ratio and boiled for 10 minutes. Fifteen microliters of

Excellent, submitted by on
SKU M00003
Application Western Blot
Sample human OCI-LY1 cell
Sample Processing Description Cell samples were lysed by sonication in RIPA buffer containing protease and phosphatase inhibitors, followed by centrifugation for 10 minutes. The supernatant was mixed with loading buffer at a 4:1 ratio and boiled for 10 minutes. Fifteen microliters of each sample were loaded per well.
Other Reagents 5% Non-fat milk
Primary Antibody mTOR/Tor Rabbit Monoclonal Antibody
Primary Incubation 1:3000, overnight at 4 ℃
Secondary Antibody HRP-conjugated Anti-Rabbit IgG Secondary Antibody
Secondary Incubation 1 hour in room temperature
Detection Substrate: ECL reagent, Imaging system:ChemiDoc MP
Results Summary This antibody is highly specific and efficient, with a clean background and no nonspecific bands. The target band has sharp and well-defined edges.

The CD71 antibody was used to detect protein expression in mouse uterine tissue. The bands were clear with no nonspecific signals. After recovery and reuse, the antibody still performed well.

Excellent, submitted by on
SKU PB9233
Application Western Blot
Sample mouse uterine tissue
Sample Processing Description Mouse uterine tissues were minced and further disrupted by sonication, then lysed on ice for 1 hour using RIPA buffer. After centrifugation, the supernatant was collected and quantified using the BCA method. The appropriate amount of loading buffer was added, and the samples were boiled in a water bath to denature the proteins. Finally, 15 μL of each protein sample was loaded into each lane of the SDS-PAGE gel.
Other Reagents 5% Non-fat milk
Primary Antibody Transferrin Receptor/TFRC Antibody
Primary Incubation 1:1000, overnight at 4 ℃
Secondary Antibody HRP-conjugated Anti-Rabbit IgG Secondary Antibody
Secondary Incubation 1 hour in room temperature
Detection Substrate: ECL reagent, Imaging system:Tanon
Results Summary The CD71 antibody was used to detect protein expression in mouse uterine tissue. The bands were clear with no nonspecific signals, and after recovery and reuse, the antibody still showed good performance.

This antibody is highly specific and efficient, with a clean background and no nonspecific bands. The target band has well-defined edges.

Excellent, submitted by on
SKU P00003
Application Western Blot
Sample human OCI-LY1 cell
Sample Processing Description Cell samples were lysed by sonication in RIPA buffer containing protease and phosphatase inhibitors, followed by centrifugation for 10 minutes. The supernatant was mixed with loading buffer at a 4:1 ratio and boiled for 10 minutes. Fifteen microliters of each sample were loaded per well.
Other Reagents 5% Non-fat milk
Primary Antibody Phospho-mTOR (S2448) Rabbit Monoclonal Antibody
Primary Incubation 1:3000, overnight at 4 ℃
Secondary Antibody HRP-conjugated Anti-Rabbit IgG Secondary Antibody
Secondary Incubation 1 hour in room temperature
Detection Substrate: ECL reagent, Imaging system:ChemiDoc MP
Results Summary This antibody is highly specific and efficient, with a clean background and no nonspecific bands. The target band has sharp and well-defined edges.

This antibody is highly specific and efficient, with a clear target band and no nonspecific bands.

Excellent, submitted by on
SKU M00220-1
Application Western Blot
Sample mouse lung cancer tissue
Sample Processing Description Tissue samples were directly lysed in RIPA buffer, mixed with loading buffer at the appropriate ratio, and denatured by heating at 98°C. Twenty microliters of each protein sample were loaded per lane onto an SDS-PAGE gel.
Other Reagents 5% Non-fat milk
Primary Antibody CD86/B7 2 Rabbit Monoclonal Antibody
Primary Incubation 1:2000, overnight at 4 ℃
Secondary Antibody HRP-conjugated Anti-Rabbit IgG Secondary Antibody
Secondary Incubation 1 hour in room temperature
Detection Substrate: ECL reagent, Imaging system:Tanon
Results Summary This antibody is highly specific and efficient, with a clear target band and no nonspecific bands.

This antibody is highly specific and efficient, suitable for detecting Vimentin protein in HTR8 cells by Western blot. Only minor nonspecific bands are observed.

Excellent, submitted by on
SKU PB9359
Application Western Blot
Sample human HTR8 cell
Sample Processing Description The samples were lysed in RIPA buffer, mixed with β-mercaptoethanol, and denatured at 100°C for 10 minutes before loading onto an SDS-PAGE gel.
Other Reagents 5% Non-fat milk
Primary Antibody Vimentin Antibody Picoband®
Primary Incubation 1:2500, overnight at 4 ℃
Secondary Antibody HRP-conjugated Anti-Rabbit IgG Secondary Antibody
Secondary Incubation 1 hour in room temperature
Detection Substrate: ECL reagent, Imaging system:ChemiDoc MP
Results Summary This antibody is highly specific and efficient, suitable for detecting Vimentin protein in HTR8 cells by Western blot, with only minor nonspecific bands observed.

This antibody is highly specific and efficient, suitable for detecting BIK in tumor tissues.

Excellent, submitted by on
SKU PB9755
Application Immunohistochemistry
Sample human lung cancer tissue
Sample Processing Description Paraffin-embedded tumor tissue sections were dewaxed with graded xylene and alcohol, followed by antigen retrieval in EDTA buffer for 10 minutes. The sections were then blocked with goat serum for 30 minutes.
Other Reagents EDTA antigen retrieval buffer
Primary Antibody Bik Antibody
Primary Incubation 1:1000, overnight at 4 ℃
Secondary Antibody HRP-conjugated Anti-Rabbit IgG Secondary Antibody
Secondary Incubation 1 hour in room temperature
Detection Imaging system:Olympus
Results Summary This antibody is highly specific and efficient, suitable for detecting BIK in tumor tissues.