CCNG1 / Cyclin-G1 · Western blot design guide

Design a Western Blot for CCNG1

Source-linked CCNG1 Western blot protocol options, expected-band and isoform facts, troubleshooting for weak or shifted signal, and recommended anti-CCNG1 WB antibodies. Everything you need to plan the experiment before you commit precious samples.

Evidence assembled September 2026 · For research use; verify linked source records and product datasheet before use
Western blot protocol sheet for CCNG1: expected band ~34.1 kDa, hero antibody A04847, catalog values and labelled standard workflow; separate PMC comparisons on the guide
Printable CCNG1 Western blot protocol sheet — expected band ~34.1 kDa, antibody A04847, controls and PMC citations. Open the full CCNG1 WB guide →

CCNG1 Western Blot Experimental Design Guide

Expected bands, source-linked protocol options, controls and antibodies — the at-a-glance facts below, then the full design guide.

Must know before running
Expected band ~34.1 kDa
Gel 12–15% (standard starting point)
Positive control ⓘ Adipose tissue (IHC candidate; verify WB) +4 more
Negative control ⓘ Heart muscle (IHC candidate; verify WB)
Important caveats
Reasons your observed band may differ from the expected size.
PTM —
Caveat —
Gene-set association MSigDB Hallmark membership
Isoform 2 isoform(s)
Section 1

Source-Linked CCNG1 Western Blot Protocol Options

The A04847 protocol combines labelled catalog values with standard starting conditions. Published comparisons retain their own sample, reagent and detection scope.

Recommended Western blot protocol parameters
Sample / lysateTarget-positive lysate and matched negative control (standard starting point)
Gel %12–15% (standard starting point)
Load20–30 µg total protein per lane; optimize for abundance (standard starting point)
TransferStandard semi-dry transfer; verify efficiency (standard starting point)
Membrane0.45 µm PVDF (standard starting point)
Blocking5% milk or 5% BSA in TBST (standard starting point)
Primary antibodyA04847; use the WB datasheet starting dilution (standard starting point)
Primary incubationOvernight at 4 °C (standard starting point)
Secondary antibodySpecies-matched HRP conjugate at validated dilution (standard starting point)
Secondary incubation1 h at room temperature (standard starting point)
Wash3 × 5 min in TBST (standard starting point)
DetectionECL; bracket exposures to avoid saturation (standard starting point)
Section 2

What Is the Expected CCNG1 Western Blot Band Size?

Cyclin-G1 has a predicted mass of 34.1 kDa; alternative splicing could affect migration, but no empirical band size or distinct isoform pattern is supplied.

What am I looking at on my blot?
Single band near 34.1 kDaconsistent with the predicted Cyclin-G1 mass; confirm identity with controls
Two bands at different positionscould reflect isoforms 1 and 2, but their migration is unknown
Band position varies between samplescould reflect different isoform expression; band identity needs confirmation
Weak whole-cell band with stronger nuclear signalconsistent with the reported nuclear location
💡Expected CCNG1 appearanceUniProt predicts 34.1 kDa, but no empirical band size is supplied; isoforms 1 and 2 could differ in migration, so confirm any assigned band with identity controls.
How each factor affects band size
UniProt predicted masssets a 34.1 kDa reference, not a measured band position
Isoform 1has no supplied isoform-specific mass or migration
Isoform 2may differ in size from isoform 1, but its mass is not supplied
Alternative splicingcould change band position without establishing a resolvable pattern
Why is my band missing or off?
SituationLikely causeNext action
No band in lysatenuclear Cyclin-G1 may be weak in the sampled whole-cell lysatecheck a nuclear fraction and a validated positive control
Band higher than expectedthe band's identity or an isoform-specific migration difference is unresolvedcompare with a positive control and test signal loss after CCNG1 knockdown
Band lower than expectedthe band's identity or an isoform-specific migration difference is unresolvedtest signal loss after CCNG1 knockdown and assess isoform expression
Multiple bandsisoforms 1 and 2 are reported, but distinct bands are not establishedcheck isoform expression and which bands respond to CCNG1 knockdown
Weak or no signalthe nuclear target may be underrepresented in the preparationassess nuclear enrichment and sample loading

Sample controls for CCNG1 Western blot

🧪HPA-IHC candidate guidance (verify in WB): For positive controls for CCNG1 in Western blot, you can use adipose tissue, which HPA scores High.
Positive control: Adipose tissue (IHC candidate; verify WB)
Negative control: Heart muscle (IHC candidate; verify WB)
Loading controls: Run GAPDH, β-actin, and a total-protein stain such as Ponceau alongside the samples.
⚠️Feasibility: CCNG1 is nuclear, so a nuclear-enriched lysate may improve detection.

HPA tissue expression evidence for CCNG1

Comprehensive Human Protein Atlas IHC scoring per tissue. Rows are taken directly from the HPA tissue chart — click any row's HPA link to view the source.

Higher expression tissues · candidate positive controls from IHC

TissueCell typeLevelEvidenceSource
Adipose tissue adipocytes High Protein (IHC) HPA →
Adrenal gland glandular cells High Protein (IHC) HPA →
Appendix glandular cells High Protein (IHC) HPA →
Breast glandular cells High Protein (IHC) HPA →
Caudate neuronal cells High Protein (IHC) HPA →

Lower expression tissues · IHC evidence, not confirmed WB-negative controls

TissueCell typeLevelEvidenceSource
Heart muscle cardiomyocytes Not detected Protein (IHC) HPA →
Liver cholangiocytes Not detected Protein (IHC) HPA →
Nasopharynx ciliated cells (cell body) Low Protein (IHC) HPA →
Parathyroid gland glandular cells Low Protein (IHC) HPA →
Bone marrow hematopoietic cells Medium Protein (IHC) HPA →
Section 3

Advanced CCNG1 Western Blot Tips

Deeper troubleshooting and optimisation questions for CCNG1, answered from its protein features.

What band size should I expect for CCNG1?
Band shift · The canonical 295-residue protein has a predicted mass of 34.1 kDa. No observed Western blot band is supplied, so use 34.1 kDa as a reference rather than an established apparent size.
Could CCNG1 isoforms produce different bands?
Isoforms · UniProt lists two isoforms. Isoform 2 lacks residues 1–134 of the canonical sequence, so it may migrate differently. These are UniProt coordinates; check the numbering convention used for any antibody epitope.

Check whether its epitope falls within canonical residues 1–134, which are missing in isoform 2. An antibody targeting that region would not be expected to detect isoform 2. Confirm epitope numbering against the UniProt sequence.
Do annotated modifications prove a band shift?
PTM · The linked UniProt record describes protein features. A modification annotation alone does not demonstrate a visible shift; retain any condition or experimental qualifier attached to it.
Does this guide establish induction of CCNG1?
Induction · No general induction response is established by this guide. A pathway or gene-set association is not evidence of induction in a particular specimen. Verify the relevant treatment and control in a target-specific experiment.
How should transfer be checked for CCNG1?
Transfer · Standard workflow guidance: verify transfer efficiency for the intended target size before interpreting a weak signal. Use total-protein assessment and optimize transfer for the membrane, gel and apparatus; the labelled catalog values take precedence.
How should blocking be optimized?
Blocking · Standard workflow guidance: follow the A04847 datasheet where specified. Otherwise compare 5% milk or 5% BSA in TBST; for a phospho-specific assay start with BSA. Optimize background and specific signal with matched controls.
How should I quantify nuclear CCNG1?
Quantitation · Because CCNG1 is annotated as nuclear, compare consistently prepared nuclear samples with an appropriate loading reference. If both isoforms are detected, define whether quantitation includes both bands or evaluates each separately.
Does DNA damage imply higher CCNG1 signal?
Interpretation · UniProt places CCNG1 in the nucleus and notes its presence at DNA replication foci after DNA damage. That localization does not establish increased total protein abundance. Compare matched samples if assessing a DNA damage response.

Consider whether a smaller band could correspond to isoform 2, which lacks canonical residues 1–134, and check antibody epitope coverage. UniProt lists no modified residues or glycosylation sites here; the supplied features do not establish a modification-driven shift or identify any observed band.
Boster reagents

CCNG1 Western Blot Antibodies

Catalog antibodies with Western blot application and product-specific WB images. Evaluate suitability with the reported sample, controls and experimental conditions.

Real WB data <h4>Western blotting validation for Anti-Cyclin G CCNG1 Antibody A04847</h4> Western Blot (WB) analysis of specific cells using Cyclin G polyclonal antibody. Electrophoresis was performed on a SDS-PAGE gel. To determine SDS-PAGE gel concentration
Anti-Cyclin G CCNG1 Antibody
Cat # A04847

A04847 is an anti-CCNG1 polyclonal antibody listed for Western blotting, with a WB validation image. The supplied caption mentions analysis of cells but does not identify the samples or provide complete gel conditions.

Which to pick: A04847 is the only listed CCNG1 antibody. Its stated reactivity is Human, Mouse and Rat, and it has a WB image; check the full validation details for your sample and conditions.

Source: BosterBio CCNG1 gene-info card — filtered to Western-blot-capable antibodies; each card shows that product's actual WB validation figure.