CCNG2 / Cyclin-G2 · Western blot design guide

Design a Western Blot for CCNG2

Source-linked CCNG2 Western blot protocol options, expected-band and isoform facts, troubleshooting for weak or shifted signal, and recommended anti-CCNG2 WB antibodies. Everything you need to plan the experiment before you commit precious samples.

Evidence assembled September 2026 · For research use; verify linked source records and product datasheet before use
Western blot protocol sheet for CCNG2: expected band ~38.9 kDa, hero antibody A09432, catalog values and labelled standard workflow; separate PMC comparisons on the guide
Printable CCNG2 Western blot protocol sheet — expected band ~38.9 kDa, antibody A09432, controls and PMC citations. Open the full CCNG2 WB guide →

CCNG2 Western Blot Experimental Design Guide

Expected bands, source-linked protocol options, controls and antibodies — the at-a-glance facts below, then the full design guide.

Must know before running
Expected band ~38.9 kDa
Gel 12–15% (standard starting point)
Positive control ⓘ Adrenal gland (IHC candidate; verify WB) +4 more
Negative control ⓘ Liver (IHC candidate; verify WB)
Important caveats
Reasons your observed band may differ from the expected size.
PTM —
Caveat —
Gene-set association MSigDB Hallmark membership
Isoform 2 isoform(s)
Section 1

Source-Linked CCNG2 Western Blot Protocol Options

The A09432 protocol combines labelled catalog values with standard starting conditions. Published comparisons retain their own sample, reagent and detection scope.

Recommended Western blot protocol parameters
Sample / lysateTarget-positive lysate and matched negative control (standard starting point)
Gel %12–15% (standard starting point)
Load20–30 µg total protein per lane; optimize for abundance (standard starting point)
TransferStandard semi-dry transfer; verify efficiency (standard starting point)
Membrane0.45 µm PVDF (standard starting point)
Blocking5% milk or 5% BSA in TBST (standard starting point)
Primary antibodyA09432; use the WB datasheet starting dilution (standard starting point)
Primary incubationOvernight at 4 °C (standard starting point)
Secondary antibodySpecies-matched HRP conjugate at validated dilution (standard starting point)
Secondary incubation1 h at room temperature (standard starting point)
Wash3 × 5 min in TBST (standard starting point)
DetectionECL; bracket exposures to avoid saturation (standard starting point)
Section 2

What Is the Expected CCNG2 Western Blot Band Size?

CCNG2 is predicted at 38.9 kDa; two isoforms could affect migration, but no distinct band pattern or empirical band size is established.

What am I looking at on my blot?
Band near 38.9 kDaConsistent with the predicted CCNG2 size; confirm identity with controls
Additional band at another sizeCould reflect annotated isoform 1 or 2; their migration is not supplied
Single detectable bandThe two annotated isoforms may not resolve or both be detected
Band in a cytoplasmic fractionConsistent with CCNG2 cytoplasmic localization
💡Expected CCNG2 appearanceCCNG2 has a predicted mass of 38.9 kDa, but no empirical band size is supplied; confirm a candidate band with antibody and expression controls because isoform migration is unknown.
How each factor affects band size
UniProt predicted massPlaces the predicted CCNG2 band near 38.9 kDa
Isoform 1Annotated splice isoform; its individual mass and migration are not supplied
Isoform 2Annotated splice isoform; its individual mass and migration are not supplied
Alternative splicingMay produce a different apparent size, but distinct bands are not established
Why is my band missing or off?
SituationLikely causeNext action
No band in lysateCCNG2 signal may be below detection in the sampled lysateCheck cytoplasmic protein recovery and use an expression control
Band higher than expectedIts identity or migration is unverified; the supplied features establish no size-raising modificationCompare with CCNG2 knockdown or another validated antibody
Band lower than expectedAn isoform is possible, but its mass is unknownCheck isoform expression and confirm band identity with knockdown
Multiple bandsIsoforms 1 and 2 are annotated, though distinct migration is unprovenUse knockdown and isoform-aware controls to assign bands
Weak or no signalCCNG2 abundance in the sample is unknownCheck sample expression, loading, and antibody performance
Broad smear instead of sharp bandNo supplied CCNG2 feature establishes a smearCheck sample quality and antibody specificity

Sample controls for CCNG2 Western blot

🧪HPA-IHC candidate guidance (verify in WB): For positive controls for CCNG2 in Western blot, you can use adrenal gland tissue, which HPA rates as high expression.
Positive control: Adrenal gland (IHC candidate; verify WB)
Negative control: Liver (IHC candidate; verify WB)
Loading controls: Run GAPDH, β-actin, and a total-protein stain alongside the samples.
⚠️Feasibility: HPA reports no detectable CCNG2 in liver, making it a feasible negative tissue control.

HPA tissue expression evidence for CCNG2

Comprehensive Human Protein Atlas IHC scoring per tissue. Rows are taken directly from the HPA tissue chart — click any row's HPA link to view the source.

Higher expression tissues · candidate positive controls from IHC

TissueCell typeLevelEvidenceSource
Adrenal gland glandular cells High Protein (IHC) HPA →
Appendix lymphoid tissue High Protein (IHC) HPA →
Bronchus respiratory epithelial cells High Protein (IHC) HPA →
Esophagus squamous epithelial cells High Protein (IHC) HPA →
Nasopharynx respiratory epithelial cells High Protein (IHC) HPA →

Lower expression tissues · IHC evidence, not confirmed WB-negative controls

TissueCell typeLevelEvidenceSource
Liver cholangiocytes Not detected Protein (IHC) HPA →
Lung alveolar cells Not detected Protein (IHC) HPA →
Ovary ovarian stroma cells Not detected Protein (IHC) HPA →
Smooth muscle smooth muscle cells Not detected Protein (IHC) HPA →
Adipose tissue adipocytes Low Protein (IHC) HPA →
Section 3

Advanced CCNG2 Western Blot Tips

Deeper troubleshooting and optimisation questions for CCNG2, answered from its protein features.

What band size should I expect for CCNG2?
Band shift · The canonical CCNG2 sequence is 344 amino acids with a predicted mass of 38.9 kDa. No observed Western blot band position is supplied, so use 38.9 kDa as a calculated reference, not a guaranteed apparent size.
How does isoform 2 differ from canonical CCNG2?
Isoforms · In UniProt numbering, isoform 2 replaces canonical residues 304–344 with one arginine, making it 40 residues shorter. A lower apparent band is possible, but the sequence difference alone does not establish where either isoform migrates on a blot.

Check the antibody epitope against the UniProt sequences. Residues 304–344 of isoform 1 are replaced in isoform 2; an epitope in that region may distinguish them. An epitope in the shared sequence may recognize both, subject to antibody validation.

Possibly. Isoform 2 is 40 residues shorter because UniProt residues 304–344 are replaced by one arginine. Compare antibody epitope coverage and band behavior before assigning identity; the supplied features do not establish an observed band size.
Do annotated modifications prove a band shift?
PTM · The linked UniProt record describes protein features. A modification annotation alone does not demonstrate a visible shift; retain any condition or experimental qualifier attached to it.
Does this guide establish induction of CCNG2?
Induction · No general induction response is established by this guide. A pathway or gene-set association is not evidence of induction in a particular specimen. Verify the relevant treatment and control in a target-specific experiment.
How should transfer be checked for CCNG2?
Transfer · Standard workflow guidance: verify transfer efficiency for the intended target size before interpreting a weak signal. Use total-protein assessment and optimize transfer for the membrane, gel and apparatus; the labelled catalog values take precedence.
How should blocking be optimized?
Blocking · Standard workflow guidance: follow the A09432 datasheet where specified. Otherwise compare 5% milk or 5% BSA in TBST; for a phospho-specific assay start with BSA. Optimize background and specific signal with matched controls.
How should I quantify CCNG2 if two bands appear?
Quantitation · Decide whether the measurement is total CCNG2 or an individual isoform. Quantify bands separately when assessing isoforms, and verify antibody recognition before interpreting their relative intensities: the supplied features do not establish equal detection of isoforms 1 and 2.
Which sample fraction is relevant for CCNG2 detection?
Interpretation · UniProt lists CCNG2 in the cytoplasm. A cytoplasmic fraction is therefore a reasonable sample to examine. Check fraction quality when interpreting a weak or absent signal.
Boster reagents

CCNG2 Western Blot Antibodies

Catalog antibodies with Western blot application and product-specific WB images. Evaluate suitability with the reported sample, controls and experimental conditions.

Real WB data Western blot analysis of lysates from KB cells, primary antibody was diluted at 1:1000, 4°over night
Anti-Cyclin-G2 CCNG2 Antibody
Cat # A09432

The catalog reports anti-CCNG2 antibody A09432 for Western blot, with stated human and mouse reactivity. Its WB image shows KB cell lysates using primary antibody at 1:1000 overnight at 4°C. This example does not establish performance across all human or mouse samples.

Which to pick: A09432 is the only listed CCNG2 antibody. It has a WB image from KB cell lysates; use the reported 1:1000 overnight incubation at 4°C as a starting point, and verify performance in your own samples.

Source: BosterBio CCNG2 gene-info card — filtered to Western-blot-capable antibodies; each card shows that product's actual WB validation figure.