This website uses cookies to ensure you get the best experience on our website.
- Table of Contents
HSPA2 antibody (PB9639) performs well in Flow Cytometry, IF, IHC, IHC-F, ICC, WB and shows reactivity with Human, Mouse, Rat.
- Validated for inter-lot consistency, specificity, and reproducibility
- Committed to quality since 1993
Filter:
Flow Cytometry analysis of PC-3 cells using anti-HSPA2 antibody (PB9639).
Overlay histogram showing PC-3 cells stained with PB9639 (Blue line). To facilitate intracellular staining, cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-HSPA2 Antibody (PB9639,1μg/1x106 cells) for 30 min at 20°C. DyLight®488 conjugated goat anti-rabbit IgG (BA1127, 5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20°C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample without incubation with primary antibody and secondary antibody (Red line) was used as a blank control.
Overlay histogram showing PC-3 cells stained with PB9639 (Blue line). To facilitate intracellular staining, cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-HSPA2 Antibody (PB9639,1μg/1x106 cells) for 30 min at 20°C. DyLight®488 conjugated goat anti-rabbit IgG (BA1127, 5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20°C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample without incubation with primary antibody and secondary antibody (Red line) was used as a blank control.
Designing a Western blot for HSPA2? The guide covers the expected band size, antibodies backed by real blot images, the controls to run alongside, and protocols taken from published papers.
Open the HSPA2 Western Blot GuideBundle Save
Anti-HSPA2 Antibody Picoband®
HSPA2 antibody
| Reactive Species | Host | Application |
|---|---|---|
| Human, Mouse, Rat | Rabbit | Flow Cytometry, IF, IHC, IHC-F, ICC, WB |
Tested Applications
HSPA2 antibody was positively detected by WB in:
human HepG2 whole cell, human Hela whole cell, human A431 whole cell, rat kidney tissue, rat C6 whole cell, mouse NIH/3T3 whole cell
Suggested blocking solution with 5% non-fat milk or BSA; (*)Recommended protein loading: 20-40 ug per lane
HSPA2 antibody was positively detected by IHC in:
mouse intestine tissue, rat intestine tissue, human lung cancer tissue
Use EDTA pH 8.0 for antigen retrieval; (*) citrate buffer pH 6.0 is an alternative.
HSPA2 antibody was positively detected by ICC/IF in:
PC-3 cell, PC-3 cell
HSPA2 antibody was positively detected by FC in:
PC-3 cell
Recommend Dilution
Application
Dilution
Species
Western blot
0.1-0.5μg/ml
Human, Mouse, Rat
Immunohistochemistry (Paraffin-embedded Section)
0.5-1μg/ml
Human, Mouse, Rat
Immunohistochemistry (Frozen Section)
0.5-1μg/ml
Human
Immunocytochemistry/Immunofluorescence
2μg/ml
Human
Flow Cytometry (Fixed)
1-3μg/1x106 cells
Human
* It is recommended to optimize the amount of this reagent in each experimental system to achieve the best results.
Note: For flow cytometry (FCM), suitable for fixed cells only. Not suitable for FACS or surface flow cytometry using live cells.
Reactive Data
Filter:
Boster Guarantee:What is this?
WB
IHC
IF
Human
Tested
Tested
Recommend
Rat
Tested
Tested
Recommend
Mouse
Tested
Tested
Recommend
Dog
Predicted
Predicted
Predicted
Bovine
Predicted
Predicted
Predicted
Sheep
Predicted
Predicted
Predicted
Rabbit
Predicted
Predicted
Predicted
Product Information
Product Name
Anti-HSPA2 Antibody Picoband®
View all HSPA2 Antibodies
View all HSPA2 Antibodies
Form
Lyophilized
Uniprot
Gene ID
Storage & Handling
Store at -20˚C for one year from date of receipt. After reconstitution, at 4˚C for one month. It can also be aliquotted and stored frozen at -20˚C for six months. Avoid repeated freeze-thaw cycles.
Host
Rabbit
Contents
Each vial contains antibody formulated with stabilizing components, 0.9 mg NaCl, 0.2 mg Na2HPO4, and 0.05 mg NaN3.
*This antibody is supplied in a stabilized formulation.
Compatibility with conjugation reactions depends on the chemistry of the conjugation method used.
For conjugation methods that are not compatible with the stabilizing components present in this formulation, a carrier-free antibody format is required.
*This antibody is supplied in a stabilized formulation.
Compatibility with conjugation reactions depends on the chemistry of the conjugation method used.
For conjugation methods that are not compatible with the stabilizing components present in this formulation, a carrier-free antibody format is required.
Clonality
Polyclonal
Isotype
Rabbit IgG
Immunogen
A synthetic peptide corresponding to a sequence at the C-terminus of human HSPA2, identical to the related mouse and rat sequences.
Cross-Reactivity
No cross-reactivity with other proteins
Reconstitution
Add 0.2ml of distilled water will yield a concentration of 500ug/ml.
Observed Molecular Weight
70 kDa
Calculated Molecular Weight
70.0 kDa
Background of HSPA2
HSPA2 (heat shock 70kDa protein 2) is also known as HEAT-SHOCK PROTEIN, 70-KD, 2, HSP70-2, HEAT-SHOCK PROTEIN, 70-KD, 3 or HSP70-3. Analysis of the sequence indicated that HSPA2 is the human homolog of the murine Hsp70-2 gene, with 91.7% identity in the nucleotide coding sequence and 98.2% in the corresponding amino acid sequence. HSPA2 has less amino acid homology to the other members of the human HSP70 gene family. HSPA2 is constitutively expressed in most tissues, with very high levels in testis and skeletal muscle. The HSPA2 gene is located on chromosome 14q22-q24. Immunohistochemical analysis detected weak expression of HSPA2 in spermatocytes and stronger expression in spermatids and in the tail of mature sperm. HSPA2 may be critical to sperm maturation through its role as a protein chaperone.
Cite This Product
Anti-HSPA2 Antibody Picoband® (Boster Biological Technology, Pleasanton CA, USA, Catalog # PB9639)
Antibody Homology Across Species
The results generated by this homology analysis tool for commonly used animal species are shown below. For unlisted species, please refer to the homology analysis between the immunogen sequence and the corresponding species.
A homology of ≥90% is recommended. Generally, higher homology indicates a greater potential for cross-species reactivity. However, protein expression levels may vary among different species, tissues, and cell types. Therefore, the homology analysis results are for reference only and do not guarantee antibody cross-reactivity or experimental performance.
Human
100%
High Homology
Mouse
100%
High Homology
Rat
100%
High Homology
Dog
100%
High Homology
Cow
97%
High Homology
Sheep
97%
High Homology
Rabbit
94%
High Homology
Drosophila
63%
Low homology
Homology ≥ 90%High Homology
70% ≤ Homology < 90%Moderate Homology
Homology < 70%Low homology
Protocols
Western Blot protocol for HSPA2 antibody
Immunohistochemistry (IHC) protocol for HSPA2 antibody
Immunocytochemistry/Immunofluorescence (ICC/IF) protocol for HSPA2 antibody
Flow Cytometry (FC) protocol for HSPA2 antibody
Review
Have you used Anti-HSPA2 Antibody Picoband®?
Submit a review and receive $370 in product credits, a $185 Amazon gift card, or our carefully curated gift bundles.
Product Promise
We promise Anti-HSPA2 Antibody Picoband® performs excellently in relevant applications for Flow Cytometry, IF, IHC, IHC-F, ICC, WB. If it doesn't perform as promised, we will refund the product. Learn more
In stock
Order Product
PB9639
Buy one primary antibody get one 0.5ml HRP or Biotin secondary antibody for free.
*Sample sizes are prepared on demand and will take extra lead time. (cannot be conjugated)
$370.00
Troubleshooting
Boster Guarantee
Guaranteed product quality
We promise all of our products perform as described in datasheets.
This product is for Research Use Only. Not for use in diagnostic procedures.
Update date:
Oct 30, 2026