SKU PA1769
Size 100μg/vial
Reactivity Human, Mouse, Rat
Clonality Polyclonal
Host Rabbit
Ig Isotype N/A
Applications IHC-P, IHC-F, ICC, WB

Overview

Product Name Anti-MCM6 Antibody
SKU/Catalog Number PA1769
Storage & Handling At -20°C for one year. After reconstitution, at 4°C for one month. It can also be aliquotted and stored frozen at -20°C for a longer time.Avoid repeated freezing and thawing.
Size 100μg/vial
Description Rabbit IgG polyclonal antibody for DNA replication licensing factor MCM6(MCM6) detection. Tested with WB, IHC-P, IHC-F, ICC in Human;Mouse;Rat.
Cite This Product Anti-MCM6 Antibody (Boster Biological Technology, Pleasanton CA, USA, Catalog # PA1769)
Host Rabbit
Contents/Buffer Each vial contains 5mg BSA, 0.9mg NaCl, 0.2mg Na2HPO4, 0.05mg Thimerosal, 0.05mg NaN3.
Form Lyophilized
Immunogen A synthetic peptide corresponding to a sequence in the middle region of human MCM6(589-605aa ESEDFIVEQYKHLRQRD), different from the related rat and mouse sequences by one amino acid.
Reactivity Human, Mouse, Rat

Assay Details

Assay Dilutions Overview

Concentration: Add 0.2ml of distilled water will yield a concentration of 500ug/ml.
Immunocytochemistry , 0.5-1μg/ml, Human, Mouse, Rat
Immunohistochemistry(Frozen Section), 0.5-1μg/ml, Human, Rat, Mouse
Immunohistochemistry(Paraffin-embedded Section), 0.5-1μg/ml, Human, Rat, Mouse, By Heat
Western blot, 0.1-0.5μg/ml, Human, Mouse, Rat

Boster's Secondary Antibodies And IHC, WB Kits

The following reagents are used to generate the images below.

Boster recommends Enhanced Chemiluminescent Kit with anti-Rabbit IgG (EK1002) for Western blot, and HRP Conjugated anti-Rabbit IgG Super Vision Assay Kit (SV0002-1) for IHC(P), IHC(F) and ICC.

Images And Assay Conditions

Anti-MCM6 antibody, PA1769, Western blotting
Lane 1: U87 Cell Lysate
Lane 2: COLO320 Cell Lysate
Lane 3: HELA Cell Lysate
Lane 4: MCF-7 Cell Lysate
Lane 5: JURKAT Cell Lysate

Anti-MCM6 antibody, PA1769, IHC(P)
IHC(P): Human Intestinal Cancer Tissue

Anti-MCM6 antibody, PA1769, IHC(P)
IHC(P): Rat Brain Tissue

Anti-MCM6 antibody, PA1769, ICC
ICC: HELA Cell

Anti-MCM6 antibody, PA1769, IHC(F)
IHC(F): Human Placenta Tissue

Figure 6. Western blot analysis of MCM6 using anti- MCM6 antibody (PA1769).
Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.
Lane 1: mouse small intestine tissue lysates,
Lane 2: mouse spleen tissue lysates,
After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti- MCM6 antigen affinity purified polyclonal antibody (Catalog # PA1769) at 0.5 μg/mL overnight at 4°C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:10000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for MCM6 at approximately 93KD. The expected band size for MCM6 is at 93KD.

Figure 7. IHC analysis of MCM6 using anti- MCM6 antibody (PA1769).
MCM6 was detected in frozen section of rat intestine tissues. The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 1μg/ml rabbit anti- MCM6 Antibody (PA1769) overnight at 4°C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37°C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC)(Catalog # SA1022) with DAB as the chromogen.

Target Info

Protein Target Info (Source: Uniprot.org)

Uniprot Id Q14566
Gene Name MCM6
Protein Name DNA replication licensing factor MCM6
Alternative Names DNA replication licensing factor MCM6;3.6.4.12;p105MCM;MCM6;
Subcellular Localization Nucleus. Binds to chromatin during G1 and detach from it during S phase.
Molecular Weight 92889 MW

*if product is indicated to react with multiple species, protein info is based on the human gene.

Ontology

Protein Function Acts as component of the MCM2-7 complex (MCM complex) which is the putative replicative helicase essential for 'once per cell cycle' DNA replication initiation and elongation in eukaryotic cells. The active ATPase sites in the MCM2-7 ring are formed through the interaction surfaces of two neighboring subunits such that a critical structure of a conserved arginine finger motif is provided in trans relative to the ATP-binding site of the Walker A box of the adjacent subunit. The six ATPase active sites, however, are likely to contribute differentially to the complex helicase activity. .
Research Areas Human, Mouse, Rat

*You can search these to find other products in these research areas.
Background MCM6(Minichromosome maintenance, s. pombe, homolog of, 6) is a protein that in humans is encoded by the MCM6 gene. MCM6 is one of the highly conserved mini-chromosome maintenance proteins(MCM) that are essential for the initiation of eukaryotic genome replication. The MCM genes were originally identified in yeast defective in minichromosome maintenance and have since been shown to play roles in the progression of the cell cycle; many are cell division control genes. The MCM6 gene is mapped on 2q21.3. Mcm 6 has recently been shown to interact strongly Cdt1 at defined residues, by mutating these target residues Wei et al. observed lack of Cdt1 recruitment of Mcm2-7 to the pre-RC. An approximately 200-kb region surrounding the C/T(-13910) polymorphism in MCM6 intron 13 functioned as an enhancer of the lactase gene promoter in intestinal cell culture.

Other Recommended Resources

Here are featured tools and databases that you might find useful.

Polyclonal antibody for MCM6 detection. Host: Rabbit.Size: 100μg/vial. Tested applications: IHC-P. Reactive species: Human. MCM6 information: Molecular Weight: 92889 MW; Subcellular Localization: Nucleus. Binds to chromatin during G1 and detach from it during S phase.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
In stock
Order Product
PA1769
Buy one primary antibody get one 0.5ml HRP or Biotin secondary antibody for free.
*Sample sizes are prepared on demand and will take extra lead time. (cannot be conjugated)
$280.00

Troubleshooting

troubleshooting_box_image

Download troubleshooting handbooks for IHC, Western blot and ELISA for FREE.

Download Free PDFs Now

Boster Guarantee

Guaranteed product quality

We promise all of our products perform as described in datasheets.

Customer Q&As

  • Q: Do you offer BSA-free antibodies? Keyword: Bovine serum albumin, carrier protein, conjugation
    A: Yes, please contact us at support@bosterbio.com for more information about BSA-free antibodies and availability. The new BSA-free formula uses trehalose as a replacement to BSA. We have tested many alternative chemicals and found that trehalose protects the antibodies the best.
  • Q: Is your western blot protocol provided from the website applicable for all your antibodies? Keyword: applications, WB
    A: The protocol is applicable for all our antibodies in WB, the NC Membrane(0.45μm or 0.22μm) and transfer time(70 mins or 50 mins) depends on the protein molecular weight, details can be found in included protocol.
  • Q: Can I conjugate markers to this antibody? Can I link custom conjugates to this antibody? Keyword: conjugation
    A: The antibody is stored with BSA and cannot be conjugated with markers. Carrier free antibodies are available upon request. Please contact support@bosterbio.com
  • Q: What should I use for negative control?
    A: Please contact us for negative control suggestions. You can also check expression databases such as genecards, uniprot etc. Due to logistic reasons, we do not sell serum or lysates that we use internally for positive or negative control.
  • Q: Where can I find troubleshooting information? What should I do if I have unexpected bands, high background, no signal, weak signal
    A: You can find Boster's troubleshoot guides under tech support tab. Please contact us for further assistance on troubleshooting your experiment.
  • Q: What is the immunogen sequence of this antibody? Is this antibody polyclonal or monoclonal?
    A: You can find the immunogen sequence under "
  • Q: What is the expected band size? Why is it different than the observed band size?
    A: The expected band size is predicted on the size of the protein. The actual band size may be affected by a few other factors including but not limited to:<br>1. Post-translational modification:phosphorylation, methylation, glycosylation etc. These modifications prevent SDS molecules from binding to the target protein and thus make the band size appear larger than expected<br>2. Post-translational cleavage: this can cause smaller bands and or multiple bands <br><br>3. Alternative splicing: the same gene can have alternative splicing patterns generating different size proteins, all with reactivities to the antibody. <br><br>4. Amino Acid R chain charge: SDS binds to positive charges. The different size and charge of the Amino Acid side chains can affect the amount of SDS binding and thus affect the observed band size.<br>5. Multimers: Multimers are usually broken up in reducing conditions. However if the interactions between the multimers are strong, the band may appear higher., <br>
  • Q: What is the suggested dilution ratio for Western Blot (WB), Immunohistochemistry (IHC) and or ELISA standards? What is the optimal pH for the sample?
    A: Check the datasheet for the product for details on dilution ratios for different experiments. You can find the datasheet button on the right side of the product page.
  • Q: What is the protocol you used for your Western blotting (WB) and Immunohistochemistry (IHC)?
    A: Check our protocols under the tech support tab.
Write a review for PA1769