This website uses cookies to ensure you get the best experience on our website.
- Table of Contents
Plaur antibody (A00993-2) performs well in ELISA, Flow Cytometry, IHC, WB and shows reactivity with Mouse, Rat.
- Validated for inter-lot consistency, specificity, and reproducibility
- Committed to quality since 1993
Filter:
Flow Cytometry analysis of PC-12 cells using anti-uPA Receptor antibody (A00993-2).
Overlay histogram showing PC-12 cells stained with A00993-2 (Blue line). To facilitate intracellular staining, cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-uPA Receptor Antibody (A00993-2, 1 μg/1x106 cells) for 30 min at 20°C. DyLight®488 conjugated goat anti-rabbit IgG (BA1127, 5-10 μg/1x106 cells) was used as secondary antibody for 30 minutes at 20°C. Isotype control antibody (Green line) was rabbit IgG (1 μg/1x106) used under the same conditions. Unlabelled sample without incubation with primary antibody and secondary antibody (Red line) was used as a blank control.
Overlay histogram showing PC-12 cells stained with A00993-2 (Blue line). To facilitate intracellular staining, cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-uPA Receptor Antibody (A00993-2, 1 μg/1x106 cells) for 30 min at 20°C. DyLight®488 conjugated goat anti-rabbit IgG (BA1127, 5-10 μg/1x106 cells) was used as secondary antibody for 30 minutes at 20°C. Isotype control antibody (Green line) was rabbit IgG (1 μg/1x106) used under the same conditions. Unlabelled sample without incubation with primary antibody and secondary antibody (Red line) was used as a blank control.
Bundle Save
Anti-uPA Receptor/Plaur Antibody Picoband®
Plaur antibody
| Reactive Species | Host | Application |
|---|---|---|
| Mouse, Rat | Rabbit | ELISA, Flow Cytometry, IHC, WB |
Tested Applications
Plaur antibody was positively detected by WB in:
rat brain tissue, rat heart tissue, rat C6 whole cell, mouse brain tissue, mouse thymus tissue, mouse heart tissue, mouse RAW264.7 whole cell
Suggested blocking solution with 5% non-fat milk or BSA; (*)Recommended protein loading: 20-40 ug per lane
Plaur antibody was positively detected by IHC in:
mouse kidney tissue, rat kidney tissue
Use TE buffer pH 9.0 for antigen retrieval; (*) citrate buffer pH 6.0 is an alternative.
Plaur antibody was positively detected by FC in:
PC-12 cell
Recommend Dilution
Application
Dilution
Species
Western blot
0.1-0.5μg/ml
Mouse, Rat
Immunohistochemistry (Paraffin-embedded Section)
2-5μg/ml
Mouse, Rat
Flow Cytometry(Fixed)
1-3 μg/1x106 cells
Rat
ELISA
0.1-0.5μg/ml
-
* It is recommended to optimize the amount of this reagent in each experimental system to achieve the best results.
Note: For flow cytometry (FCM), validated for fixed cells only. Not validated for FACS or surface flow cytometry using live cells.
Reactive Data
Filter:
Boster Guarantee:What is this?
WB
IHC
IF
ELISA
Rat
Tested
Tested
Recommend
Recommend
Mouse
Tested
Tested
Recommend
Recommend
Product Information
Product Name
Anti-uPA Receptor/Plaur Antibody Picoband®
View all PLAUR Antibodies
View all PLAUR Antibodies
Form
Lyophilized
Uniprot
Gene ID
Storage & Handling
Store at -20˚C for one year from date of receipt. After reconstitution, at 4˚C for one month. It can also be aliquotted and stored frozen at -20˚C for six months. Avoid repeated freeze-thaw cycles.
Host
Rabbit
Contents
Each vial contains 4 mg Trehalose, 0.9 mg NaCl and 0.2 mg Na2HPO4.
Clonality
Polyclonal
Isotype
Rabbit IgG
Immunogen
E. coli-derived rat uPA Receptor recombinant protein (Position: L25-R261).
Cross-Reactivity
No cross-reactivity with other proteins.
Reconstitution
Add 0.2ml of distilled water will yield a concentration of 500ug/ml.
Observed Molecular Weight
50 kDa
Calculated Molecular Weight
35.8 kDa
Background of Plaur
PLAUR (PLASMINOGEN ACTIVATOR RECEPTOR, UROKINASE-TYPE), also known as UPAR or CD87, is multidomain glycoprotein tethered to the cell membrane with a glycosylphosphotidylinositol (GPI) anchor. PLAUR consists of three different domains of the Ly-6/uPAR/alpha-neurotoxin family. PLAUR is originally identified as a saturable binding site for urokinase on the cell surface. And the gene plays an important role in many normal as well as pathologic processes. The PLAUR gene is localized to 19q13.31. PLAUR is a part of the plasminogen activation system, which in the healthy body is involved in tissue reorganization events such as mammary gland involution and wound healing. PLAUR binds urokinase and thus restricts plasminogen activation to the immediate vicinity of the cell membrane. Thus it seems to be an important player in the regulation of this process. In human coronary artery vascular smooth muscle cells, UPA stimulates cell migration via a UPAR signaling complex containing TYK2 and phosphatidylinositol 3-kinase.
Cite This Product
Anti-uPA Receptor/Plaur Antibody Picoband® (Boster Biological Technology, Pleasanton CA, USA, Catalog # A00993-2)
Antibody Homology Across Species
The results generated by this homology analysis tool for commonly used animal species are shown below. For unlisted species, please refer to the homology analysis between the immunogen sequence and the corresponding species.
A homology of ≥90% is recommended. Generally, higher homology indicates a greater potential for cross-species reactivity. However, protein expression levels may vary among different species, tissues, and cell types. Therefore, the homology analysis results are for reference only and do not guarantee antibody cross-reactivity or experimental performance.
Rat
100%
High Homology
Mouse
90%
High Homology
Rabbit
69%
Low homology
Monkey
65%
Low homology
Human
65%
Low homology
Cow
61%
Low homology
Sheep
60%
Low homology
Dog
54%
Low homology
Homology ≥ 90%High Homology
70% ≤ Homology < 90%Moderate Homology
Homology < 70%Low homology
Protocols
Western Blot protocol for Plaur antibody
Immunohistochemistry (IHC) protocol for Plaur antibody
Flow Cytometry (FC) protocol for Plaur antibody
Review
Have you used Anti-uPA Receptor/Plaur Antibody Picoband®?
Submit a review and receive $370 in product credits, a $185 Amazon gift card, or our carefully curated gift bundles.
Product Promise
We promise Anti-uPA Receptor/Plaur Antibody Picoband® performs excellently in relevant applications for ELISA, Flow Cytometry, IHC, WB. If it doesn't perform as promised, we will refund the product. Learn more
In stock
Order Product
A00993-2
Buy one primary antibody get one 0.5ml HRP or Biotin secondary antibody for free.
*Sample sizes are prepared on demand and will take extra lead time. (cannot be conjugated)
$370.00
Troubleshooting
Boster Guarantee
Guaranteed product quality
We promise all of our products perform as described in datasheets.
This product is for Research Use Only. Not for use in diagnostic procedures.
Update date:
Oct 6, 2026