Bovine BMP-2 ELISA Kit PicoKine™

Bovine BMP-2 ELISA Kit PicoKine™ (96 Tests). Quantitate Bovine BMP2 in bone tissue, cell culture supernatants and serum. Sensitivity: 2pg/ml.

Product Info Summary

SKU: EK0311-BV
Size: 96 wells/kit, with removable strips.
Reactive Species: Bovine
Application: ELISA
Sample Types: bone tissue, cell culture supernatants and serum.

Product Name

Bovine BMP-2 ELISA Kit PicoKine™

See all BMP2 products

SKU/Catalog Number

EK0311-BV

Size

96 wells/kit, with removable strips.

*Question: How many samples can I assay/run in this kit?

Description

Bovine BMP-2 ELISA Kit PicoKine™ (96 Tests). Quantitate Bovine BMP2 in bone tissue, cell culture supernatants and serum. Sensitivity: 2pg/ml.

Storage & Handling

Store at 4°C for 6 months, at -20°C for 12 months. Avoid multiple freeze-thaw cycles (Shipped with wet ice.)

Cite This Product

Bovine BMP-2 ELISA Kit PicoKine™ (Boster Biological Technology, Pleasanton CA, USA, Catalog # EK0311-BV)

Clonality of Antibodies

See Datasheet for details

Immunogen

Expression system for standard: CHO; Immunogen sequence: Q283-R396

Sensitivity

<2 pg/ml

Assay Range

31.2 pg/ml - 2,000 pg/ml

Cross Reactivity

There is no detectable cross-reactivity with other relevant proteins.

Reactive Species

EK0311-BV is reactive to BMP2 in Bovine samples

Validated Sample Types

bone tissue, cell culture supernatants and serum.

Application Guarantee

EK0311-BV is guaranteed for ELISA in Bovine by Boster Guarantee

See how Boster Bio validate our ELISA kits: ELISA Validation Information

Kit Components

Catalog Number Description Quantity
EK0311-BV-CAP Anti-Bovine BMP2 Pre-coated 96-well strip microplate 1
EK0311-BV-ST Bovine BMP2 Standard 2 vials, 10 ng/tube
EK0311-BV-DA Bovine BMP2 Biotinylated antibody (100x) 100ul
AR1103 Avidin-Biotin-Peroxidase Complex (100x) 100ul
AR1106-1 Sample Diluent 30ml
AR1106-2 Antibody Diluent 12ml
AR1106-3 Avidin-Biotin-Peroxidase Diluent 12ml
AR1104 Color Developing Reagent (TMB) 10ml
AR1105 Stop Solution 10ml
AR1106-5 Wash Buffer (25x) 20ml
PLA-SEA Adhesive plate sealers 4

*The kit components are not available for individual purchase.

Materials Required But Not Included In Kit

  • Microplate Reader capable of reading absorbance at 450nm.
  • Automated plate washer (optional).
  • Pipettes and pipette tips capable of precisely dispensing 0.5 µl through 1 ml volumes of aqueous solutions.
  • Multichannel pipettes are recommended for large amount of samples.
  • Deionized or distilled water.
  • 500ml graduated cylinders.
  • Test tubes for dilution.

Innovating Scientists Reward

If you are the first to review this product, or if you have results for a special sample, species or application this product is not validated in, share your results with us and receive your next antibody/ELISA kit free of charge! Applicable to all scientists world wide.

Submit A Review

Validation Standard Curve O.D. At 450nm

Concentration (pg/ml)02000200020002000200020002000
O.D.0.0050.0340.0590.1190.2770.6801.6422.417

Data Example Images

Intra Assay Consistency & Inter Assay Consistency

We measured random samples of Bovine BMP-2 ELISA Kit PicoKine™ within the same batch/lot to ensure the consistency of the kits' performances. ELISA intra assay consistency is measured using wells from the same plate/assay kit. ELISA inter assay consistency is measured using wells from different plates from the same batch production/lot.

Intra-Assay PrecisionInter-Assay Precision
Sample123123
n161616242424
Mean (pg/ml)28574211973068341358
Standard deviation9.1223.1737.1218.9758.3897.78
CV (%)3.23.53.16.277.2

Gene/Protein Information For BMP2 (Source: Uniprot.Org, NCBI)

Uniprot ID

P12643

Gene ID

650

Gene Name

BMP2

Full Name

Bone morphogenetic protein 2

Weight

44.702kDa

Superfamily

TGF-beta family

Alternative Names

BDA2; BMP2; BMP-2; BMP-2A; BMP2ABone morphogenetic protein 2A; bone morphogenetic protein 2; SSFSC BMP2 BDA2A, SSFSC, SSFSC1, BMP2 bone morphogenetic protein 2 bone morphogenetic protein 2|bone morphogenetic protein 2A

*if product is indicated to react with multiple species, protein info is based on the gene entry specified above in "species".

For more info on BMP2, check out the BMP2 Infographic

BMP2 infographic

We have 30,000+ of these available, one for each gene! check them out.

In this infographic you will see the following information for BMP2: database IDs, super-family, protein function, synonyms, molecular weight, chromosomal locations, tissues of expression, subcellular locations, post translational modifications, and related diseases, research areas & pathways. If you want to see more information included, or would like to contribute to it and be acknowledged, please contact us [email protected]

No publications found for EK0311-BV

*Do you have publications using this product? Share with us and receive a reward. Ask us for more details.

Have you used Bovine BMP-2 ELISA Kit PicoKine™?

Submit a review and receive an Amazon gift card.

  • $25/€18/£15/$25CAN/¥75 Yuan/¥1250 Yen for a review with an image
  • $10/€7/£6/$10 CAD/¥70 Yuan/¥1110 Yen for a review without an image

Submit A Review

Be the first to review Bovine BMP-2 ELISA Kit PicoKine™

*The first user to submit a review for a product is eligible for Boster's Innovating Scientists Reward, which gives a free antibody. This is in addition to the gift card reward.

Have a question?

Find answers in Q&As, reviews.

Can't find your answer?

Submit your question

6 Customer Q&As for Bovine BMP-2 ELISA Kit PicoKine™

Question

Q: if the enzyme conjugated BMP2 antibodies are mixed with the substrate, will that convert the substrate into the enzymatic reaction product? Or the enzyme function is only activated when the antibody is attached with the BMP2 antigen?

Verified Customer

Verified customer

Asked: 2019-05-02

Answer

A: The enzyme is always active. Avoid contaminating the substrate with enzyme prior to the incubation otherwise it compromises the assay with false positive signal.

Boster Scientific Support

Answered: 2019-05-02

Question

Q: What is the optimal O.D. value for BMP2 ELISA kit? I performed your BMP2 ELISA on serum samples. For my positive control, I received an O.D. value of 0.826, while my negative control received a value of 0.136. I obtained both of these controls from the ELISA kit, where your kit's typical data shows O.D. values much higher than my positive control and your background is lower. My samples O.D. values are around 0.225 and the highest is only 0.357. is it safe to say these samples contain BMP2 even though the O.D. values are not very high?

Verified Customer

Verified customer

Asked: 2019-04-09

Answer

A: The absolute O.D. values may change according to incubation time. The more you incubate the higher the O.D. values are going to be. an important assessment should be is whether your sample O.D. values are statistically significantly higher than your blank values. in the above example, you could extend your development time in the substrate incubation step to obtain higher O.D. values, as long as your negative controls' O.D. values are not increasing faster in proportion to your positive controls. typically, a sample with O.D. value 2 standard deviations higher than your negative controls can be considered positive. We calculate the sensitivity of this ELISA kit by changeing cutoff O.D. value, calculated as the average of 20 negative controls plus 2 standard deviations of the 20 negative controls, into a concentration. in other words, when we claim this BMP2 ELISA kit to have sensitivity of 2pg/ml, that means the minimum amount of BMP2 that can be declared/interpreted as positive by the above standard is 2pg/ml.

Boster Scientific Support

Answered: 2019-04-09

Question

Q: can you suggest the dilution ratio of serum samples for detection of BMP2 in Bovine serum? I am trying to measure a few analytes and it requires 100ul of diluted samples for each well. We have low serum volumes so we like to dilute as much as possible.

Verified Customer

Verified customer

Asked: 2018-12-16

Answer

A: unable to know the physiological or pathological context of your samples we cannot recommend a dilution ratio without performing a pilot test with your samples. Here is how you can perform a pilot study on your own: perform a serial dilution of your samples on the BMP2 ELISA kit to make sure you have a linear ascending curve followed by a plateau, which signifies the samples saturating the detection limit of the kit. Then you can pick the dilution ratios from samples in the linear part of the curve as your experimental dilution ratio.
If you are interested in using our ELISA service, you can also send us your sample and we will take care of everything for you. You can check our service details here: bosterbio.com/services/assay-services/ELISA-testing-service
Since you mentioned you have limited samples, our cost effective multiplex ELISA service would fit perfectly for your needs, where we can generate dozens of data points using as little as 25ul sample volume. Information on this service is also in the above link.

Boster Scientific Support

Answered: 2018-12-16

Question

Q: Are Boster Bio recombinant proteins and antibodies sterile?

Verified Customer

Verified customer

Asked: 2018-10-30

Answer

A: although the vials are bottled using aseptic techniques, heat-treated vials, and sterile stock solutions, they are not considered or guaranteed to be sterile. If sterile material is a must for an experiment, the material can be filtered through a 0.2 micron filter designed for use with biological fluids.

Boster Scientific Support

Answered: 2018-10-30

Question

Q: how many samples can be assayed in a Picokine® ELISA Kit?

Verified Customer

Verified customer

Asked: 2018-09-18

Answer

A: The Picokine® ELISA Kits will generally run a 7-point standard curve, non-specific binding wells, and 39 samples in duplicate. this may depends upon the kit used so please refer to each datasheet for details.

Boster Scientific Support

Answered: 2018-09-18

Question

Q: for how much duration can samples (cell cultures, serum, and plasma) be stored and still be stable for quantification BMP2 using the EK0311-BV Bovine BMP2 Picokine® ELISA Kit?

Verified Customer

Verified customer

Asked: 2018-05-26

Answer

A: Boster Bio does not assess sample stability. Variations in sample collection, processing, and storage may alter the stabilityof samples. It is recommend to assay sample on priority basis collection when possible, or aliquot into single use volumes and store samples frozen. avoid repeat freeze-thaw cycles with the stored samples to prevent protein degradation.

Boster Scientific Support

Answered: 2018-05-26

$400

Ask a question

Ships directly to USA and Canada. For other regions, visit our distributors page

Bulk Inquiry

Sample Inquiry

In stock
Order Product
EK0311-BV
$400.00

Troubleshooting

troubleshooting-box-image

Download troubleshooting handbooks for IHC, Western blot and ELISA for FREE.

Download Free PDFs Now

Boster Guarantee

Guaranteed product quality

Guaranteed product quality

We promise all of our products perform as described in datasheets.