This website uses cookies to ensure you get the best experience on our website.
- Table of Contents
NPM1 antibody (PB9341) performs well in Flow Cytometry, IF, IHC, ICC, WB and shows reactivity with Human, Mouse, Rat.
- Validated for inter-lot consistency, specificity, and reproducibility
- Committed to quality since 1993
Filter:
Flow Cytometry analysis of HEL cells using anti-Nucleophosmin antibody (PB9341).
Overlay histogram showing HEL cells stained with PB9341 (Blue line). To facilitate intracellular staining, cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-Nucleophosmin Antibody (PB9341, 1 μg/1x106 cells) for 30 min at 20°C. DyLight®488 conjugated goat anti-rabbit IgG (BA1127, 5-10 μg/1x106 cells) was used as secondary antibody for 30 minutes at 20°C. Isotype control antibody (Green line) was rabbit IgG (1 μg/1x106) used under the same conditions. Unlabelled sample without incubation with primary antibody and secondary antibody (Red line) was used as a blank control.
Overlay histogram showing HEL cells stained with PB9341 (Blue line). To facilitate intracellular staining, cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-Nucleophosmin Antibody (PB9341, 1 μg/1x106 cells) for 30 min at 20°C. DyLight®488 conjugated goat anti-rabbit IgG (BA1127, 5-10 μg/1x106 cells) was used as secondary antibody for 30 minutes at 20°C. Isotype control antibody (Green line) was rabbit IgG (1 μg/1x106) used under the same conditions. Unlabelled sample without incubation with primary antibody and secondary antibody (Red line) was used as a blank control.
Bundle Save
Anti-Nucleophosmin/NPM1 Antibody Picoband®
NPM1 antibody
| Reactive Species | Host | Application |
|---|---|---|
| Human, Mouse, Rat | Rabbit | Flow Cytometry, IF, IHC, ICC, WB |
Tested Applications
NPM1 antibody was positively detected by WB in:
human Hela whole cell, human Jurkat whole cell, human MCF-7 whole cell, rat C6 whole cell, rat NRK whole cell, rat PC-12 whole cell, rat RH35 whole cell, mouse ANA-1 whole cell, mouse RAW2647 whole cell, mouse Neuro-2a whole cell, mouse HEPA1-6 whole cell
Suggested blocking solution with 5% non-fat milk or BSA; (*)Recommended protein loading: 20-40 ug per lane
NPM1 antibody was positively detected by IHC in:
Mouse Intestine tissue, Rat Intestine tissue, Human Intestinal Cancer tissue
Use TE buffer pH 9.0 for antigen retrieval; (*) citrate buffer pH 6.0 is an alternative.
NPM1 antibody was positively detected by ICC/IF in:
CACO-2 cell
NPM1 antibody was positively detected by IF in:
human intestinal cancer tissue
NPM1 antibody was positively detected by FC in:
HEL cell
Recommend Dilution
Application
Dilution
Species
Western blot
0.1-0.5μg/ml
Human, Mouse, Rat
Immunohistochemistry (Paraffin-embedded Section)
0.5-1μg/ml
Human, Mouse, Rat
Immunocytochemistry/Immunofluorescence
5 μg/ml
Human
Immunofluorescence
5 μg/ml
Human
Flow Cytometry (Fixed)
1-3 μg/1x106 cells
Human
* It is recommended to optimize the amount of this reagent in each experimental system to achieve the best results.
Note: For flow cytometry (FCM), suitable for fixed cells only. Not suitable for FACS or surface flow cytometry using live cells.
Reactive Data
Filter:
Boster Guarantee:What is this?
WB
IHC
IF
Human
Tested
Tested
Tested
Rat
Tested
Tested
Recommend
Mouse
Tested
Tested
Recommend
Monkey
Predicted
Predicted
Predicted
Dog
Predicted
Predicted
Predicted
Rabbit
Predicted
Predicted
Predicted
Bovine
Predicted
Predicted
Predicted
Sheep
Predicted
Predicted
Predicted
Product Information
Product Name
Anti-Nucleophosmin/NPM1 Antibody Picoband®
View all NPM1 Antibodies
View all NPM1 Antibodies
Form
Lyophilized
Uniprot
Gene ID
Storage & Handling
Store at -20˚C for one year from date of receipt. After reconstitution, at 4˚C for one month. It can also be aliquotted and stored frozen at -20˚C for six months. Avoid repeated freeze-thaw cycles.
Host
Rabbit
Contents
Each vial contains antibody formulated with stabilizing components, 0.9 mg NaCl, 0.2 mg Na2HPO4, and 0.05 mg NaN3.
*This antibody is supplied in a stabilized formulation.
Compatibility with conjugation reactions depends on the chemistry of the conjugation method used.
For conjugation methods that are not compatible with the stabilizing components present in this formulation, a carrier-free antibody format is required.
*This antibody is supplied in a stabilized formulation.
Compatibility with conjugation reactions depends on the chemistry of the conjugation method used.
For conjugation methods that are not compatible with the stabilizing components present in this formulation, a carrier-free antibody format is required.
Clonality
Polyclonal
Isotype
Rabbit IgG
Immunogen
E.coli-derived human Nucleophosmin recombinant protein (Position: M1-L294). Human Nucleophosmin shares 95% amino acid (aa) sequence identity with both mouse and rat Nucleophosmin.
Cross-Reactivity
No cross-reactivity with other proteins
Reconstitution
Add 0.2ml of distilled water will yield a concentration of 500ug/ml.
Observed Molecular Weight
39 kDa
Calculated Molecular Weight
32.6 kDa
Background of NPM1
NPM1 (Nucleophosmin/Nucleoplasmin family, member1), also known as NPM, nucleolar phosphoprotein B23 or numatrin, is a protein that in humans is encoded by the NPM1 gene. The NPM1 gene maps to chromosome 5q35. Chan et al. (1989) found that nucleophosmin is a nucleolar phosphoprotein that is more abundant in tumor cells than in normal resting cells. Stimulation of the growth of normal cells, e.g., mitogen activation of B lymphocytes, was accompanied by an increase in nucleophosmin protein level. They stated that nucleophosmin is likely involved in the assembly of ribosomal proteins into ribosomes. Electron microscopic study indicated that nucleophosmin is concentrated in the granular region of the nucleolus, where ribosome assembly occurs.
Cite This Product
Anti-Nucleophosmin/NPM1 Antibody Picoband® (Boster Biological Technology, Pleasanton CA, USA, Catalog # PB9341)
Antibody Homology Across Species
The results generated by this homology analysis tool for commonly used animal species are shown below. For unlisted species, please refer to the homology analysis between the immunogen sequence and the corresponding species.
A homology of ≥90% is recommended. Generally, higher homology indicates a greater potential for cross-species reactivity. However, protein expression levels may vary among different species, tissues, and cell types. Therefore, the homology analysis results are for reference only and do not guarantee antibody cross-reactivity or experimental performance.
Human
100%
High Homology
Monkey
100%
High Homology
Dog
98%
High Homology
Rabbit
98%
High Homology
Cow
96%
High Homology
Sheep
96%
High Homology
Mouse
95%
High Homology
Rat
95%
High Homology
Zebrafish
48%
Low homology
Homology ≥ 90%High Homology
70% ≤ Homology < 90%Moderate Homology
Homology < 70%Low homology
Protocols
Western Blot protocol for NPM1 antibody
Immunohistochemistry (IHC) protocol for NPM1 antibody
Immunocytochemistry/Immunofluorescence (ICC/IF) protocol for NPM1 antibody
Immunofluorescence (IF) protocol for NPM1 antibody
Flow Cytometry (FC) protocol for NPM1 antibody
Review
Have you used Anti-Nucleophosmin/NPM1 Antibody Picoband®?
Submit a review and receive $370 in product credits, a $185 Amazon gift card, or our carefully curated gift bundles.
Product Promise
We promise Anti-Nucleophosmin/NPM1 Antibody Picoband® performs excellently in relevant applications for Flow Cytometry, IF, IHC, ICC, WB. If it doesn't perform as promised, we will refund the product. Learn more
In stock
Order Product
PB9341
Buy one primary antibody get one 0.5ml HRP or Biotin secondary antibody for free.
*Sample sizes are prepared on demand and will take extra lead time. (cannot be conjugated)
$370.00
Troubleshooting
Boster Guarantee
Guaranteed product quality
We promise all of our products perform as described in datasheets.
This product is for Research Use Only. Not for use in diagnostic procedures.
Update date:
Oct 4, 2026