This website uses cookies to ensure you get the best experience on our website.
- Table of Contents
SNAI3 antibody (PB9440) performs well in WB and shows reactivity with Human.
- Validated for inter-lot consistency, specificity, and reproducibility
- Committed to quality since 1993
Filter:
Western blot analysis of SNAI3 using anti-SNAI3 antibody (PB9440).
Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours.
Lane 1: MCF-7 Whole Cell Lysate at 40ug.
After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-SNAI3 antigen affinity purified polyclonal antibody (Catalog # PB9440) at 0.5 μg/mL overnight at 4°C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for SNAI3 at approximately 32 kDa. The expected band size for SNAI3 is at 32 kDa.
Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours.
Lane 1: MCF-7 Whole Cell Lysate at 40ug.
After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-SNAI3 antigen affinity purified polyclonal antibody (Catalog # PB9440) at 0.5 μg/mL overnight at 4°C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for SNAI3 at approximately 32 kDa. The expected band size for SNAI3 is at 32 kDa.
Bundle Save
Anti-SNAI3 Antibody Picoband®
SNAI3 antibody
| Reactive Species | Host | Application |
|---|---|---|
| Human | Rabbit | WB |
Tested Applications
SNAI3 antibody was positively detected by WB in:
MCF-7 Whole Cell
Suggested blocking solution with 5% non-fat milk or BSA; (*)Recommended protein loading: 20-40 ug per lane
Recommend Dilution
Application
Dilution
Species
Western blot
0.1-0.5μg/ml
Human
* It is recommended to optimize the amount of this reagent in each experimental system to achieve the best results.
Product Information
Product Name
Anti-SNAI3 Antibody Picoband®
View all SNAI3 Antibodies
View all SNAI3 Antibodies
Form
Lyophilized
Uniprot
Gene ID
Storage & Handling
Store at -20˚C for one year from date of receipt. After reconstitution, at 4˚C for one month. It can also be aliquotted and stored frozen at -20˚C for six months. Avoid repeated freeze-thaw cycles.
Host
Rabbit
Contents
Each vial contains antibody formulated with stabilizing components, 0.9 mg NaCl, 0.2 mg Na2HPO4, and 0.05 mg NaN3.
*This antibody is supplied in a stabilized formulation.
Compatibility with conjugation reactions depends on the chemistry of the conjugation method used.
For conjugation methods that are not compatible with the stabilizing components present in this formulation, a carrier-free antibody format is required.
*This antibody is supplied in a stabilized formulation.
Compatibility with conjugation reactions depends on the chemistry of the conjugation method used.
For conjugation methods that are not compatible with the stabilizing components present in this formulation, a carrier-free antibody format is required.
Clonality
Polyclonal
Isotype
Rabbit IgG
Immunogen
A synthetic peptide corresponding to a sequence in the middle region of human SNAI3, different from the related mouse sequence by two amino acids.
Cross-Reactivity
No cross-reactivity with other proteins
Reconstitution
Add 0.2ml of distilled water will yield a concentration of 500ug/ml.
Observed Molecular Weight
32 kDa
Calculated Molecular Weight
32.5 kDa
Background of SNAI3
SNAI3 is a member of the SNAIL gene family, named for the Drosophila snail gene, which plays roles in mesodermal formation during embryogenesis. SNAI3 gene, was located between KIAA0233 gene and CBFA2T3 gene in human chromosome 16q24.3, a region affected in breast cancer, gastric cancer, hepatocellular carcinoma, ovarian cancer, and therapy-related myeloid leukemia with t (16;21) (q24;q22) translocation. Human SNAI3 gene was found to encode 292-amino-acid polypeptide with the N-terminal SNAG domain and five zinc finger domains. And Human SNAI3 mRNA was expressed in skin melanotic melanoma, lung epidermoid carcinoma, and germ cell tumor. Because SNAG zinc-finger proteins are transcriptional repressors implicated in carcinogenesis and embryogenesis, SNAI3 gene might be a potent target of pharmacogenomics in the field of oncology and regenerative medicine.
Cite This Product
Anti-SNAI3 Antibody Picoband® (Boster Biological Technology, Pleasanton CA, USA, Catalog # PB9440)
Antibody Homology Across Species
The results generated by this homology analysis tool for commonly used animal species are shown below. For unlisted species, please refer to the homology analysis between the immunogen sequence and the corresponding species.
A homology of ≥90% is recommended. Generally, higher homology indicates a greater potential for cross-species reactivity. However, protein expression levels may vary among different species, tissues, and cell types. Therefore, the homology analysis results are for reference only and do not guarantee antibody cross-reactivity or experimental performance.
Human
100%
High Homology
Monkey
96%
High Homology
Mouse
83%
Moderate Homology
Rat
79%
Moderate Homology
Rabbit
79%
Moderate Homology
Dog
79%
Moderate Homology
Sheep
67%
Low homology
Cow
63%
Low homology
Drosophila
50%
Low homology
Zebrafish
42%
Low homology
Homology ≥ 90%High Homology
70% ≤ Homology < 90%Moderate Homology
Homology < 70%Low homology
Protocols
Western Blot protocol for SNAI3 antibody
Review
Have you used Anti-SNAI3 Antibody Picoband®?
Submit a review and receive $370 in product credits, a $185 Amazon gift card, or our carefully curated gift bundles.
Product Promise
We promise Anti-SNAI3 Antibody Picoband® performs excellently in relevant applications for WB. If it doesn't perform as promised, we will refund the product. Learn more
In stock
Order Product
PB9440
Buy one primary antibody get one 0.5ml HRP or Biotin secondary antibody for free.
*Sample sizes are prepared on demand and will take extra lead time. (cannot be conjugated)
$370.00
Troubleshooting
Boster Guarantee
Guaranteed product quality
We promise all of our products perform as described in datasheets.
This product is for Research Use Only. Not for use in diagnostic procedures.
Update date:
Oct 11, 2026