Human C1S ELISA Kit PicoKine™

Human C1S ELISA Kit PicoKine™ (96 Tests). Quantitate Human C1S in cell culture supernatants, serum, plasma (heparin, EDTA or citrate) , urine, human milk. Sensitivity: 0.1ng/ml.

Product Info Summary

SKU: EK1934
Size: 96 wells/kit, with removable strips.
Reactive Species: Human
Application: ELISA
Sample Types: cell culture supernatants, serum, plasma (heparin, EDTA or citrate) , urine, human milk

Product Name

Human C1S ELISA Kit PicoKine™

See all Complement Component C1s products

SKU/Catalog Number

EK1934

Size

96 wells/kit, with removable strips.

*Question: How many samples can I assay/run in this kit?

Description

Human C1S ELISA Kit PicoKine™ (96 Tests). Quantitate Human C1S in cell culture supernatants, serum, plasma (heparin, EDTA or citrate) , urine, human milk. Sensitivity: 0.1ng/ml.

Storage & Handling

Store at 4°C for 6 months, at -20°C for 12 months. Avoid multiple freeze-thaw cycles (Shipped with wet ice.)

Cite This Product

Human C1S ELISA Kit PicoKine™ (Boster Biological Technology, Pleasanton CA, USA, Catalog # EK1934)

Clonality of Antibodies

See Datasheet for details

Immunogen

Expression system for standard: NS0; Immunogen sequence: E16-D688

Sensitivity

<0.1 ng/ml

Assay Range

0.78 ng/ml - 50 ng/ml

Cross Reactivity

There is no detectable cross-reactivity with other relevant proteins.

Reactive Species

EK1934 is reactive to C1S in Human samples

Validated Sample Types

cell culture supernatants, serum, plasma (heparin, EDTA or citrate) , urine, human milk

Application Guarantee

EK1934 is guaranteed for ELISA in Human by Boster Guarantee

See how Boster Bio validate our ELISA kits: ELISA Validation Information

Kit Components

Catalog Number Description Quantity
EK1934-CAP Anti-Human C1S Pre-coated 96-well strip microplate 1
EK1934-ST Human C1S Standard 2 vials, 50 ng/tube
EK1934-DA Human C1S Biotinylated antibody (100x) 100ul
AR1103 Avidin-Biotin-Peroxidase Complex (100x) 100ul
AR1106-1 Sample Diluent 30ml
AR1106-2 Antibody Diluent 12ml
AR1106-3 Avidin-Biotin-Peroxidase Diluent 12ml
AR1104 Color Developing Reagent (TMB) 10ml
AR1105 Stop Solution 10ml
AR1106-5 Wash Buffer (25x) 20ml
PLA-SEA Adhesive plate sealers 4

*The kit components are not available for individual purchase.

Materials Required But Not Included In Kit

  • Microplate Reader capable of reading absorbance at 450nm.
  • Automated plate washer (optional).
  • Pipettes and pipette tips capable of precisely dispensing 0.5 µl through 1 ml volumes of aqueous solutions.
  • Multichannel pipettes are recommended for large amount of samples.
  • Deionized or distilled water.
  • 500ml graduated cylinders.
  • Test tubes for dilution.

Innovating Scientists Reward

If you are the first to review this product, or if you have results for a special sample, species or application this product is not validated in, share your results with us and receive your next antibody/ELISA kit free of charge! Applicable to all scientists world wide.

Submit A Review

Validation Standard Curve O.D. At 450nm

Concentration (ng/ml)00.781.563.126.2512.52550
O.D.0.0250.1730.3470.6761.2611.6032.1711.928

Data Example Images

Recommended Sample Dilution Ratios

According to our internal validation assays using this ELISA kit, to detect Complement Component C1s, Dilution ratio of 1:5000, concentration in serum is 20-50ug/ml.

Intra Assay Consistency & Inter Assay Consistency

We measured random samples of Human C1S ELISA Kit PicoKine™ within the same batch/lot to ensure the consistency of the kits' performances. ELISA intra assay consistency is measured using wells from the same plate/assay kit. ELISA inter assay consistency is measured using wells from different plates from the same batch production/lot.

Intra-Assay PrecisionInter-Assay Precision
Sample123123
n161616242424
Mean (pg/ml)12364483228541393456722796
Standard deviation76.63300.361028.4382.19324.26980.23
CV (%)6.2%6.7%4.5%5.9%7.1%4.3%

Reproducibility

We ensure reproducibility by testing three samples with differing concentrations of Complement Component C1s in ELISA kits from four different production batches/lots.

LotsLot 1 (pg/ml)Lot 2 (pg/ml)Lot 3 (pg/ml)Lot 4 (pg/ml)Mean (pg/ml)Standard DeviationCV (%)
Sample 11236124613931346130566.455.0%
Sample 244834300386741104190228.405.4%
Sample 322854237612048122796224731212.075.3%
*number of samples for each test n=16.

Gene/Protein Information For C1S (Source: Uniprot.Org, NCBI)

Uniprot ID

P09871

Gene ID

716

Gene Name

C1S

Full Name

Complement C1s subcomponent

Weight

76.684kDa

Superfamily

peptidase S1 family

Alternative Names

basic proline-rich peptide IB-1; C1 esterase; C1S; complement C1s subcomponent; Complement component 1 subcomponent s; complement component 1, s subcomponent; Complement Component C1s; EC 3.4.21; EC 3.4.21.42; FLJ44757 C1S EDSPD2 complement C1s complement C1s subcomponent|C1 esterase|basic proline-rich peptide IB-1|complement component 1 subcomponent s|complement component 1, s subcomponent

*if product is indicated to react with multiple species, protein info is based on the gene entry specified above in "species".

For more info on C1S, check out the C1S Infographic

C1S infographic

We have 30,000+ of these available, one for each gene! check them out.

In this infographic you will see the following information for C1S: database IDs, super-family, protein function, synonyms, molecular weight, chromosomal locations, tissues of expression, subcellular locations, post translational modifications, and related diseases, research areas & pathways. If you want to see more information included, or would like to contribute to it and be acknowledged, please contact us [email protected]

No publications found for EK1934

*Do you have publications using this product? Share with us and receive a reward. Ask us for more details.

Have you used Human C1S ELISA Kit PicoKine™?

Submit a review and receive an Amazon gift card.

  • $25/€18/£15/$25CAN/¥75 Yuan/¥1250 Yen for a review with an image
  • $10/€7/£6/$10 CAD/¥70 Yuan/¥1110 Yen for a review without an image

Submit A Review

Be the first to review Human C1S ELISA Kit PicoKine™

*The first user to submit a review for a product is eligible for Boster's Innovating Scientists Reward, which gives a free antibody. This is in addition to the gift card reward.

Have a question?

Find answers in Q&As, reviews.

Can't find your answer?

Submit your question

9 Customer Q&As for Human C1S ELISA Kit PicoKine™

Question

Q: we need your recommendation regarding the dilution ratio of serum samples for detection of Complement Component C1s in Human plasma ? I am trying to measure a multiple analytes and it requires 100ul of diluted samples for each well. We have limited sample quantitys so we like to dilute as much as possible.

Verified Customer

Verified customer

Asked: 2020-06-25

Answer

A: having little idea about the physiological or pathological context of your samples we cannot recommend a dilution ratio without performing a pilot test with your samples. Here is how you can perform a pilot study on your own: perform a serial dilution of your samples on the Complement Component C1s ELISA kit to make sure you have a linear ascending curve followed by a plateau, which signifies the samples saturating the detection limit of the kit. Then you can pick the dilution ratios from samples in the linear part of the curve as your experimental dilution ratio.
If you are interested in using our ELISA service, you can also send us your sample and we will take care of everything for you. You can check our service details here: bosterbio.com/services/assay-services/ELISA-testing-service
Since you mentioned you have limited samples, our cost effective multiplex ELISA service would fit perfectly for your needs, where we can generate dozens of data points using as little as 25ul sample volume. Information on this service is also in the above link.

Boster Scientific Support

Answered: 2020-06-25

Question

Q: Can Complement Component C1s ELISA Kits be used with tissue homogenates (or other non-validated sample types)?

Verified Customer

Verified customer

Asked: 2020-04-18

Answer

A: Unfortunately, Boster Bio has not routinely validated tissue homogenates as a sample type for ELISA kits. This does not mean that ELISA kits are not valid for other sample types than we have tested: it means further investigation is a must. One will need to perform a spike and recovery study to determine if an unvalidated sample type will work with a particular kit. To perform a spike and recovery experiment, one should divide a sample into two aliquots. In one of the aliquots, the user should spike in a known amount of the kit standard. a dilution series is performed comparing the spiked versus the unspiked sample. Generally, samples with expected recovery and linearity between 80-120% are considered acceptable. This method can be used to validate any sample type that has not been evaluated by Boster Bio. for a more detailed spike and recovery protocol, please contact technical support.
Note: acceptable ranges should be determined individually by each laboratory. Additionally, technical support can help determine if a buffer component is not compatible with a given ELISA kit. please see the Citations tab on the product webpage for peer-reviewed papers utilizing a wide range of sample types. We also have an innovator's reward program where if the user validates our ELISA kits in applications or samples previously not validated by Boster Bio or other users, and share such information with us by submit a review, we will reward the user's efforts with a free antibody or ELISA kit from our catalog. Biocompare.com will also give $20 Amazon giftcard as an additional reward, if the review is submitted there as well.

Boster Scientific Support

Answered: 2020-04-18

Question

Q: Are Boster Bio recombinant proteins and antibodies sterile?

S. Zhao

Verified customer

Asked: 2020-01-16

Answer

A: although the vials are bottled using aseptic techniques, heat-treated vials, and sterile stock solutions, they are not considered or guaranteed to be sterile. If sterile material is a must for an experiment, the material can be filtered through a 0.2 micron filter designed for use with biological fluids.

Boster Scientific Support

Answered: 2020-01-16

Question

Q: is there any online tool I can use to streamline the data analysis for my ELISA results?

Verified Customer

Verified customer

Asked: 2019-11-12

Answer

A: We have a web based ELISA curve fitting (4pl) and data analysis tool. Please give it a try: bosterbio.com/biology-research-tools/ELISA-data-analysis-online. You can also consult our article on ELISA data analysis: bosterbio.com/ELISA-data-analysis-instructions

Boster Scientific Support

Answered: 2019-11-12

Question

Q: how many samples can be assayed in a Picokine® ELISA Kit?

Verified Customer

Verified customer

Asked: 2019-03-16

Answer

A: The Picokine® ELISA Kits will generally run a 7-point standard curve, non-specific binding wells, and 39 samples in duplicate. this may vary slightly by kit so please refer to each datasheet for details.

Boster Scientific Support

Answered: 2019-03-16

Question

Q: can I use citrate plasma as samples in Human Complement Component C1s Picokine® ELISA Kit (Catalog # EK1934)?

Z. Li

Verified customer

Asked: 2018-12-11

Answer

A: Chelating agents such as EDTA, Heparin and Citrate can sequester metal ions from the functional domain of Complement Component C1s causing degradation of its protein structure. Complement Component C1s may be denatured as a result and may compromise the assay's measurements. The chilating sites could also be too close to the epitopes needed for detection and block the antigen antibody reaction. We have tested the Complement Component C1s ELISA, treating samples with a number of anticoagulants and decided that heparin, EDTA or citrate can be used for treatment of blood/plasma samples. Do not use other anticoagulents when collecting samples.

Boster Scientific Support

Answered: 2018-12-11

Question

Q: how to thaw whole blood sample for Complement Component C1s ELISA after freezing?

Verified Customer

Verified customer

Asked: 2018-07-06

Answer

A: we do not recommend freezing and thaw whole blood. erythrocytes are fragile and, if frozen and thawed, will undergo hemolysis rendering the samples useless. To keep your blood samples to test Complement Component C1s for a later time, you should let the blood clot in glass tubes and separate the serum to freeze for later analysis.

Boster Scientific Support

Answered: 2018-07-06

Question

Q: What is the optimal O.D. value for Complement Component C1s ELISA kit? I used your Complement Component C1s ELISA on serum samples. For my positive control, I received an O.D. value of 0.826, while my negative control received a value of 0.136. I obtained both of these controls from the ELISA kit, where your kit's typical data shows O.D. values much higher than my positive control and your background is lower. My samples O.D. values are around 0.225 and the highest is only 0.357. is it safe to say these samples contain Complement Component C1s even though the O.D. values are not very high?

E. Dayal

Verified customer

Asked: 2016-06-20

Answer

A: The absolute O.D. values may change according to incubation time. The more you incubate the higher the O.D. values are going to be. an important assessment should be is whether your sample O.D. values are statistically significantly higher than your blank values. in your example, you could extend your development time in the substrate incubation step to obtain higher O.D. values, as long as your negative controls' O.D. values are not increasing faster in relation to your positive controls. normally, a sample with O.D. value 2 standard deviations higher than your negative controls can be considered positive. We calculate the sensitivity of this ELISA kit by changeing cutoff O.D. value, calculated as the average of 20 negative controls plus 2 standard deviations of the 20 negative controls, into a concentration. in other words, when we claim this Complement Component C1s ELISA kit to have sensitivity of 0.1ng/ml, that means the minimum amount of Complement Component C1s that can be declared/interpreted as positive by the above standard is 0.1ng/ml.

Boster Scientific Support

Answered: 2016-06-20

Question

Q: for how much duration can samples (cell cultures, serum, and plasma) be stored and still be stable for measuring Complement Component C1s using the EK1934 Human Complement Component C1s Picokine® ELISA Kit?

Verified Customer

Verified customer

Asked: 2015-07-03

Answer

A: Boster Bio does not evaluate sample stability. Variations in sample collection, processing, and storage may alter the stabilityof samples. It is recommend to assay sample immediately after collection when possible, or aliquot into single use volumes and store samples frozen. avoid repeat freeze-thaw cycles with the stored samples to prevent protein degradation.

Boster Scientific Support

Answered: 2015-07-03

$369

Ask a question

Ships directly to USA and Canada. For other regions, visit our distributors page

Bulk Inquiry

Sample Inquiry

In stock
Order Product
EK1934
$369.00

Troubleshooting

troubleshooting-box-image

Download troubleshooting handbooks for IHC, Western blot and ELISA for FREE.

Download Free PDFs Now

Boster Guarantee

Guaranteed product quality

Guaranteed product quality

We promise all of our products perform as described in datasheets.