Mouse SMOC1 ELISA Kit PicoKine™

Mouse SMOC1 ELISA Kit PicoKine™ (96 Tests). Quantitate Mouse Smoc1 in cell culture supernatants, serum and plasma (heparin). Sensitivity: 10pg/ml.

Product Info Summary

SKU: EK1936
Size: 96 wells/kit, with removable strips.
Reactive Species: Mouse
Application: ELISA
Sample Types: cell culture supernatants, serum and plasma (heparin).

Product Name

Mouse SMOC1 ELISA Kit PicoKine™

See all SMOC-1 products

SKU/Catalog Number

EK1936

Size

96 wells/kit, with removable strips.

*Question: How many samples can I assay/run in this kit?

Description

Mouse SMOC1 ELISA Kit PicoKine™ (96 Tests). Quantitate Mouse Smoc1 in cell culture supernatants, serum and plasma (heparin). Sensitivity: 10pg/ml.

Storage & Handling

Store at 4°C for 6 months, at -20°C for 12 months. Avoid multiple freeze-thaw cycles (Ships with gel ice, can store for up to 3 days in room temperature. Freeze upon receiving.)

Cite This Product

Mouse SMOC1 ELISA Kit PicoKine™ (Boster Biological Technology, Pleasanton CA, USA, Catalog # EK1936)

Clonality of Antibodies

See Datasheet for details

Immunogen

Expression system for standard: NS0; Immunogen sequence: H26-V463

Sensitivity

<10 pg/ml

Assay Range

31.2 pg/ml - 2,000 pg/ml

Cross Reactivity

There is no detectable cross-reactivity with other relevant proteins.

Reactive Species

EK1936 is reactive to Smoc1 in Mouse samples

Validated Sample Types

cell culture supernatants, serum and plasma (heparin).

Application Guarantee

EK1936 is guaranteed for ELISA in Mouse by Boster Guarantee

See how Boster Bio validate our ELISA kits: ELISA Validation Information

Kit Components

Catalog Number Description Quantity
EK1936-CAP Anti-Mouse Smoc1 Pre-coated 96-well strip microplate 1
EK1936-ST Mouse Smoc1 Standard 2 vials, 10 ng/tube
EK1936-DA Mouse Smoc1 Biotinylated antibody (100x) 100ul
AR1103 Avidin-Biotin-Peroxidase Complex (100x) 100ul
AR1106-1 Sample Diluent 30ml
AR1106-2 Antibody Diluent 12ml
AR1106-3 Avidin-Biotin-Peroxidase Diluent 12ml
AR1104 Color Developing Reagent (TMB) 10ml
AR1105 Stop Solution 10ml
AR1106-5 Wash Buffer (25x) 20ml
PLA-SEA Adhesive plate sealers 4

*The kit components are not available for individual purchase.

Materials Required But Not Included In Kit

  • Microplate Reader capable of reading absorbance at 450nm.
  • Automated plate washer (optional).
  • Pipettes and pipette tips capable of precisely dispensing 0.5 µl through 1 ml volumes of aqueous solutions.
  • Multichannel pipettes are recommended for large amount of samples.
  • Deionized or distilled water.
  • 500ml graduated cylinders.
  • Test tubes for dilution.

Innovating Scientists Reward

If you are the first to review this product, or if you have results for a special sample, species or application this product is not validated in, share your results with us and receive your next antibody/ELISA kit free of charge! Applicable to all scientists world wide.

Submit A Review

Validation Standard Curve O.D. At 450nm

Concentration (pg/ml)031.262.512525050010002000
O.D.0.1040.1480.1890.2610.4560.7621.2231.982

Data Example Images

Recommended Sample Dilution Ratios

According to our internal validation assays using this ELISA kit, to detect SMOC-1, Dilution ratio of 1:5, concentration in serum is 1500-3200pg/ml.

Intra Assay Consistency & Inter Assay Consistency

We measured random samples of Mouse SMOC1 ELISA Kit PicoKine™ within the same batch/lot to ensure the consistency of the kits' performances. ELISA intra assay consistency is measured using wells from the same plate/assay kit. ELISA inter assay consistency is measured using wells from different plates from the same batch production/lot.

Intra-Assay PrecisionInter-Assay Precision
Sample123123
n161616242424
Mean (pg/ml)5921491960231947
Standard deviation3.0713.4844.112.9417.0950.19
CV (%)5.2%6.3%4.8%4.9%7.4%5.3%

Reproducibility

We ensure reproducibility by testing three samples with differing concentrations of SMOC-1 in ELISA kits from four different production batches/lots.

LotsLot 1 (pg/ml)Lot 2 (pg/ml)Lot 3 (pg/ml)Lot 4 (pg/ml)Mean (pg/ml)Standard DeviationCV (%)
Sample 159565757571.081.8%
Sample 22142322262372278.583.7%
Sample 391979181987585149.555.8%
*number of samples for each test n=16.

Gene/Protein Information For Smoc1 (Source: Uniprot.Org, NCBI)

Uniprot ID

Q8BLY1

Gene ID

64075

Gene Name

Smoc1

Full Name

SPARC-related modular calcium-binding protein 1

Weight

51.076kDa

Alternative Names

Secreted modular calcium-binding protein 1; SMOC1; SMOC-1; SPARC related modular calcium binding 1; SPARC-related modular calcium-binding protein 1 Smoc1|2600002F22Rik, AI848508, S, SRG|SPARC related modular calcium binding 1|SPARC-related modular calcium-binding protein 1|SMOC-1|SPARC-related gene protein|SPARC-related protein|secreted modular calcium binding protein 1

*if product is indicated to react with multiple species, protein info is based on the gene entry specified above in "species".

For more info on Smoc1, check out the Smoc1 Infographic

Smoc1 infographic

We have 30,000+ of these available, one for each gene! check them out.

In this infographic you will see the following information for Smoc1: database IDs, super-family, protein function, synonyms, molecular weight, chromosomal locations, tissues of expression, subcellular locations, post translational modifications, and related diseases, research areas & pathways. If you want to see more information included, or would like to contribute to it and be acknowledged, please contact us [email protected]

No publications found for EK1936

*Do you have publications using this product? Share with us and receive a reward. Ask us for more details.

Have you used Mouse SMOC1 ELISA Kit PicoKine™?

Submit a review and receive an Amazon gift card.

  • $25/€18/£15/$25CAN/¥75 Yuan/¥1250 Yen for a review with an image
  • $10/€7/£6/$10 CAD/¥70 Yuan/¥1110 Yen for a review without an image

Submit A Review

Be the first to review Mouse SMOC1 ELISA Kit PicoKine™

*The first user to submit a review for a product is eligible for Boster's Innovating Scientists Reward, which gives a free antibody. This is in addition to the gift card reward.

Have a question?

Find answers in Q&As, reviews.

Can't find your answer?

Submit your question

8 Customer Q&As for Mouse SMOC1 ELISA Kit PicoKine™

Question

Q: can I use EDTA plasma as samples in Mouse SMOC-1 Picokine® ELISA Kit (Catalog # EK1936)?

D. Chakrabarti

Verified customer

Asked: 2020-09-03

Answer

A: Chelating agents such as EDTA, Heparin and Citrate can bind metal ions from the functional domain of SMOC-1 causing disruption of its protein structure. SMOC-1 may be denatured as a result and may compromise the assay's measurements. The chilating sites could also be too close to the epitopes a must for detection and block the antigen antibody reaction. We have tested the SMOC-1 ELISA, treating samples with various anticoagulants and decided that heparin can be used for treatment of blood/plasma samples. Do not use other anticoagulents when collecting samples.

Boster Scientific Support

Answered: 2020-09-03

Question

Q: can you suggest the dilution ratio of serum samples for detection of SMOC-1 in Mouse plasma? I am trying to measure a a number of analytes and it requires 100ul of diluted samples for each well. We have low serum quantitys so we like to dilute as much as possible.

C. Young

Verified customer

Asked: 2020-08-13

Answer

A: unable to know the physiological or pathological context of your samples we cannot recommend a dilution ratio without performing a pilot test with your samples. Here is how you can perform a pilot study on your own: perform a serial dilution of your samples on the SMOC-1 ELISA kit to make sure you have a linear ascending curve followed by a plateau, which signifies the samples saturating the detection limit of the kit. Then you can pick the dilution ratios from samples in the linear part of the curve as your experimental dilution ratio.
If you are interested in using our ELISA service, you can also send us your sample and we will take care of everything for you. You can check our service details here: bosterbio.com/services/assay-services/ELISA-testing-service
Since you mentioned you have limited samples, our cost effective multiplex ELISA service would fit perfectly for your needs, where we can generate dozens of data points using as little as 25ul sample volume. Information on this service is also in the above link.

Boster Scientific Support

Answered: 2020-08-13

Question

Q: is there any online tool I can use to streamline the data analysis for my ELISA results?

Verified Customer

Verified customer

Asked: 2020-07-12

Answer

A: We have a web based ELISA curve fitting (4pl) and data analysis tool. Please give it a try: bosterbio.com/biology-research-tools/ELISA-data-analysis-online. You can also consult our article on ELISA data analysis: bosterbio.com/ELISA-data-analysis-instructions

Boster Scientific Support

Answered: 2020-07-12

Question

Q: Are Boster Bio recombinant proteins and antibodies sterile?

Verified Customer

Verified customer

Asked: 2019-05-20

Answer

A: although the vials are bottled using aseptic techniques, heat-treated vials, and sterile stock solutions, they are not considered or guaranteed to be sterile. If sterile material is a must for an experiment, the material can be filtered through a 0.2 micron filter designed for use with biological fluids.

Boster Scientific Support

Answered: 2019-05-20

Question

Q: how many samples can be assayed in a Picokine® ELISA Kit?

Verified Customer

Verified customer

Asked: 2019-04-21

Answer

A: The Picokine® ELISA Kits will generally run a 7-point standard curve, non-specific binding wells, and 39 samples in duplicate. this may might differ by kit so please refer to each datasheet for details.

Boster Scientific Support

Answered: 2019-04-21

Question

Q: how to proceed with the analysis of ELISA data? I have performed SMOC-1 level in plasma.

H. Campbell

Verified customer

Asked: 2019-03-24

Answer

A: please read this article on ELISA data analysis. bosterbio.com/ELISA-data-analysis-instructions. we also provide a convenient online tool that you can use to analyze ELISA data. bosterbio.com/biology-research-tools/ELISA-data-analysis-online

Boster Scientific Support

Answered: 2019-03-24

Question

Q: if the enzyme conjugated SMOC-1 antibodies are mixed with the substrate, will that change the substrate into the enzymatic reaction product? Or the enzyme function is only activated when the antibody is attached with the SMOC-1 antigen?

Verified Customer

Verified customer

Asked: 2018-06-19

Answer

A: The enzyme is always active. Avoid contaminating the substrate with enzyme prior to the incubation otherwise it compromises the assay with false positive signal.

Boster Scientific Support

Answered: 2018-06-19

Question

Q: Can SMOC-1 ELISA Kits be used with tissue homogenates (or other non-validated sample types)?

W. Scott

Verified customer

Asked: 2016-04-15

Answer

A: Unfortunately, Boster Bio has not routinely validated tissue homogenates as a sample type for ELISA kits. This does not mean that ELISA kits are not suitable for other sample types than we have tested: it means further investigation is required. One will need to perform a spike and recovery study to determine if an unvalidated sample type will work with a particular kit. To perform a spike and recovery experiment, one should divide a sample into two aliquots. In one of the aliquots, the user should spike in a known amount of the kit standard. a dilution series is performed comparing the spiked versus the unspiked sample. Generally, samples with expected recovery and linearity between 80-120% are considered acceptable. This method can be used to validate any sample type that has not been evaluated by Boster Bio. for a more detailed spike and recovery protocol, please contact technical support.
Note: acceptable ranges should be determined individually by each laboratory. Additionally, technical support can help determine if a buffer component is not compatible with a given ELISA kit. please check the Citations tab on the product webpage for peer-reviewed papers utilizing a wide range of sample types. We also have an innovator's reward program where if the user validates our ELISA kits in applications or samples previously not validated by Boster Bio or other users, and share such information with us by submit a review, we will reward the user's efforts with a free antibody or ELISA kit from our catalog. Biocompare.com will also give $20 Amazon giftcard as an additional reward, if the review is submitted there as well.

Boster Scientific Support

Answered: 2016-04-15

$369

Ask a question

Ships directly to USA and Canada. For other regions, visit our distributors page

Bulk Inquiry

Sample Inquiry

In stock
Order Product
EK1936
$369.00

Troubleshooting

troubleshooting-box-image

Download troubleshooting handbooks for IHC, Western blot and ELISA for FREE.

Download Free PDFs Now

Boster Guarantee

Guaranteed product quality

Guaranteed product quality

We promise all of our products perform as described in datasheets.