This website uses cookies to ensure you get the best experience on our website.
- Table of Contents
BMP4 antibody (PB9688) performs well in ELISA, WB and shows reactivity with Human, Mouse.
- Validated for inter-lot consistency, specificity, and reproducibility
- Committed to quality since 1993
- Over 1 Publication
Filter:
Western blot analysis of BMP-4 using anti-BMP-4 antibody (PB9688).
Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours.
Lane 1: Mouse Lung Tissue Lysate at 50ug,
Lane 2: Mouse Liver Tissue Lysate at 50ug,
Lane 3: HEPA Whole Cell Lysate at 40ug,
Lane 4: HEPG2 Whole Cell Lysate at 40ug,
Lane 5: HELA Whole Cell Lysate at 40ug.
After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-BMP-4 antigen affinity purified polyclonal antibody (Catalog # PB9688) at 0.5 μg/mL overnight at 4°C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for BMP-4 at approximately 46 kDa. The expected band size for BMP-4 is at 46 kDa.
Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours.
Lane 1: Mouse Lung Tissue Lysate at 50ug,
Lane 2: Mouse Liver Tissue Lysate at 50ug,
Lane 3: HEPA Whole Cell Lysate at 40ug,
Lane 4: HEPG2 Whole Cell Lysate at 40ug,
Lane 5: HELA Whole Cell Lysate at 40ug.
After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-BMP-4 antigen affinity purified polyclonal antibody (Catalog # PB9688) at 0.5 μg/mL overnight at 4°C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for BMP-4 at approximately 46 kDa. The expected band size for BMP-4 is at 46 kDa.
Bundle Save
Anti-BMP4 Antibody Picoband®
BMP4 antibody
| Reactive Species | Host | Application |
|---|---|---|
| Human, Mouse | Rabbit | ELISA, WB |
Tested Applications
BMP4 antibody was positively detected by WB in:
Mouse Lung Tissue, Mouse Liver Tissue, HEPA Whole Cell, HEPG2 Whole Cell, HELA Whole Cell
Suggested blocking solution with 5% non-fat milk or BSA; (*)Recommended protein loading: 20-40 ug per lane
Recommend Dilution
Application
Dilution
Species
ELISA
0.1-0.5μg/ml
-, Mouse, -
Western blot
0.1-0.5μg/ml
Human, Mouse
* It is recommended to optimize the amount of this reagent in each experimental system to achieve the best results.
Reactive Data
Filter:
Boster Guarantee:What is this?
WB
ELISA
Mouse
Tested
Recommend
Human
Recommend
Bovine
Predicted
Predicted
Sheep
Predicted
Predicted
Dog
Predicted
Predicted
Monkey
Predicted
Predicted
Rat
Predicted
Predicted
Rabbit
Predicted
Predicted
Product Information
Product Name
Anti-BMP4 Antibody Picoband®
View all BMP4 Antibodies
View all BMP4 Antibodies
Form
Lyophilized
Uniprot
Gene ID
Storage & Handling
Store at -20˚C for one year from date of receipt. After reconstitution, at 4˚C for one month. It can also be aliquotted and stored frozen at -20˚C for six months. Avoid repeated freeze-thaw cycles.
Host
Rabbit
Contents
Each vial contains antibody formulated with stabilizing components, 0.9 mg NaCl, 0.2 mg Na2HPO4, and 0.05 mg NaN3.
*This antibody is supplied in a stabilized formulation.
Compatibility with conjugation reactions depends on the chemistry of the conjugation method used.
For conjugation methods that are not compatible with the stabilizing components present in this formulation, a carrier-free antibody format is required.
*This antibody is supplied in a stabilized formulation.
Compatibility with conjugation reactions depends on the chemistry of the conjugation method used.
For conjugation methods that are not compatible with the stabilizing components present in this formulation, a carrier-free antibody format is required.
Clonality
Polyclonal
Isotype
Rabbit IgG
Immunogen
A synthetic peptide corresponding to a sequence at the C-terminus of human BMP-4, different from the related mouse and rat sequences by two amino acids.
Cross-Reactivity
No cross-reactivity with other proteins
Reconstitution
Add 0.2ml of distilled water will yield a concentration of 500ug/ml.
Observed Molecular Weight
46 kDa
Calculated Molecular Weight
46.6 kDa
Background of BMP4
Bone morphogenetic protein 4 is a protein that in humans is encoded by BMP4 gene. It is found on chromosome 14q22-q23. The protein encoded by this gene is a member of the bone morphogenetic protein family which is part of the transforming growth factor-beta superfamily. The superfamily includes large families of growth and differentiation factors. Bone morphogenetic proteins were originally identified by an ability of demineralized bone extract to induce endochondral osteogenesis in vivo in an extraskeletal site. This particular family member plays an important role in the onset of endochondral bone formation in humans, and a reduction in expression has been associated with a variety of bone diseases, including the heritable disorder Fibrodysplasia Ossificans Progressiva. Alternative splicing in the 5' untranslated region of this gene has been described and three variants are described, all encoding an identical protein.
Cite This Product
Anti-BMP4 Antibody Picoband® (Boster Biological Technology, Pleasanton CA, USA, Catalog # PB9688)
Antibody Homology Across Species
The results generated by this homology analysis tool for commonly used animal species are shown below. For unlisted species, please refer to the homology analysis between the immunogen sequence and the corresponding species.
A homology of ≥90% is recommended. Generally, higher homology indicates a greater potential for cross-species reactivity. However, protein expression levels may vary among different species, tissues, and cell types. Therefore, the homology analysis results are for reference only and do not guarantee antibody cross-reactivity or experimental performance.
Human
100%
High Homology
Cow
97%
High Homology
Sheep
97%
High Homology
Dog
97%
High Homology
Monkey
97%
High Homology
Mouse
94%
High Homology
Rat
94%
High Homology
Rabbit
94%
High Homology
Zebrafish
78%
Moderate Homology
Drosophila
56%
Low homology
Homology ≥ 90%High Homology
70% ≤ Homology < 90%Moderate Homology
Homology < 70%Low homology
Protocols
Western Blot protocol for BMP4 antibody
Publications
Application:
Species:
Local expression and role of BMP-2/4 in injured spinal cord.
Published: 2015-08-07
Journal: GENETICS AND MOLECULAR RESEARCH
Application: WB,IHC
Impact Factor: 0.78
Species: Rat
PMID: 26345843
Review
Have you used Anti-BMP4 Antibody Picoband®?
Submit a review and receive $370 in product credits, a $185 Amazon gift card, or our carefully curated gift bundles.
Product Promise
We promise Anti-BMP4 Antibody Picoband® performs excellently in relevant applications for ELISA, WB. If it doesn't perform as promised, we will refund the product. Learn more
In stock
Order Product
PB9688
Buy one primary antibody get one 0.5ml HRP or Biotin secondary antibody for free.
*Sample sizes are prepared on demand and will take extra lead time. (cannot be conjugated)
$370.00
Troubleshooting
Boster Guarantee
Guaranteed product quality
We promise all of our products perform as described in datasheets.
This product is for Research Use Only. Not for use in diagnostic procedures.
Update date:
Oct 27, 2026