This website uses cookies to ensure you get the best experience on our website.
- Table of Contents
ITGB4 antibody (PB9007) performs well in Flow Cytometry, IF, IHC, IHC-F, ICC, WB and shows reactivity with Human.
- Validated for inter-lot consistency, specificity, and reproducibility
- Committed to quality since 1993
Filter:
Flow Cytometry analysis of A431 cells using anti-ITGB4 antibody (PB9007).
Overlay histogram showing A431 cells stained with PB9007 (Blue line). To facilitate intracellular staining, cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-ITGB4 Antibody (PB9007,1μg/1x106 cells) for 30 min at 20°C. DyLight®488 conjugated goat anti-rabbit IgG (BA1127, 5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20°C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample without incubation with primary antibody and secondary antibody (Red line) was used as a blank control.
Overlay histogram showing A431 cells stained with PB9007 (Blue line). To facilitate intracellular staining, cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-ITGB4 Antibody (PB9007,1μg/1x106 cells) for 30 min at 20°C. DyLight®488 conjugated goat anti-rabbit IgG (BA1127, 5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20°C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample without incubation with primary antibody and secondary antibody (Red line) was used as a blank control.
Bundle Save
Anti-Integrin beta 4/ITGB4 Antibody Picoband®
ITGB4 antibody
| Reactive Species | Host | Application |
|---|---|---|
| Human | Rabbit | Flow Cytometry, IF, IHC, IHC-F, ICC, WB |
Tested Applications
ITGB4 antibody was positively detected by WB in:
human A549 whole cell, human PC-3 whole cell, human T-47D whole cell, human Hela whole cell, human Caco-2 whole cell
Suggested blocking solution with 5% non-fat milk or BSA; (*)Recommended protein loading: 20-40 ug per lane
ITGB4 antibody was positively detected by IHC in:
human placenta tissue, human intestinal cancer tissue
Use TE buffer pH 9.0 for antigen retrieval; (*) citrate buffer pH 6.0 is an alternative.
ITGB4 antibody was positively detected by IF in:
human placenta tissue
ITGB4 antibody was positively detected by FC in:
A431 cell
Recommend Dilution
Application
Dilution
Species
Western blot
0.1-0.5μg/ml
Human
Immunohistochemistry (Paraffin-embedded Section)
0.5-1μg/ml
Human
Immunofluorescence
2μg/ml
Human
Immunohistochemistry (Frozen Section)
0.5-1μg/ml
Human
Immunocytochemistry
0.5-1μg/ml
Human
Flow Cytometry (Fixed)
1-3μg/1x106 cells
Human
* It is recommended to optimize the amount of this reagent in each experimental system to achieve the best results.
Note: For flow cytometry (FCM), validated for fixed cells only. Not validated for FACS or surface flow cytometry using live cells.
Reactive Data
Filter:
Boster Guarantee:What is this?
WB
IHC
ICC
IF
Human
Tested
Tested
Recommend
Tested
Monkey
Predicted
Predicted
Predicted
Predicted
Bovine
Predicted
Predicted
Predicted
Predicted
Sheep
Predicted
Predicted
Predicted
Predicted
Product Information
Product Name
Anti-Integrin beta 4/ITGB4 Antibody Picoband®
View all ITGB4 Antibodies
View all ITGB4 Antibodies
Form
Lyophilized
Uniprot
Gene ID
Storage & Handling
Store at -20˚C for one year from date of receipt. After reconstitution, at 4˚C for one month. It can also be aliquotted and stored frozen at -20˚C for six months. Avoid repeated freeze-thaw cycles.
Host
Rabbit
Contents
Each vial contains antibody formulated with stabilizing components, 0.9 mg NaCl, 0.2 mg Na2HPO4, and 0.05 mg NaN3.
*This antibody is supplied in a stabilized formulation.
Compatibility with conjugation reactions depends on the chemistry of the conjugation method used.
For conjugation methods that are not compatible with the stabilizing components present in this formulation, a carrier-free antibody format is required.
*This antibody is supplied in a stabilized formulation.
Compatibility with conjugation reactions depends on the chemistry of the conjugation method used.
For conjugation methods that are not compatible with the stabilizing components present in this formulation, a carrier-free antibody format is required.
Clonality
Polyclonal
Isotype
Rabbit IgG
Immunogen
E.coli-derived human Integrin beta 4 recombinant protein (Position: N28-A266). Human Integrin beta 4 shares 88% and 86% amino acid (aa) sequences identity with mouse and rat Integrin beta 4, respectively.
Cross-Reactivity
No cross-reactivity with other proteins
Reconstitution
Add 0.2ml of distilled water will yield a concentration of 500ug/ml.
Observed Molecular Weight
210 kDa
Calculated Molecular Weight
202.2 kDa
Background of ITGB4
ITGB4 (Integrin, beta-4), also known as CD104 (Cluster of Differentiation 104), is a human gene. The gene encodes the integrin beta 4 subunits, a receptor for the laminins. This subunit tends to associate with alpha 6 subunits and is likely to play a pivotal role in the biology of invasive carcinoma. The ITGB4 gene is mapped on 17q25.1. Using expression profiling, Yang et al. found that ITGB4 was upregulated 6-fold by ZKSCAN3 in transfected human colon cancer cells compared with parental cells. They confirmed that ZKSCAN3 bound the promoter of ITGB4 in vitro and in vivo. ITGB4 knockdown by short hairpin RNA countered ZKSCAN3-augmented anchorage-independent colony formation in the colon cancer cell lines. The integrin beta-4 subunit is characterized by an unusually long cytoplasmic domain that harbors 4 fibronectin type III (FNIII) repeats, residing in 2 pairs separated by a connecting segment. Vidal et al. found compound heterozygosity for mutations in the ITGB4 gene in an infant with junctional epidermolysis bullosa associated with pyloric atresia.
Cite This Product
Anti-Integrin beta 4/ITGB4 Antibody Picoband® (Boster Biological Technology, Pleasanton CA, USA, Catalog # PB9007)
Antibody Homology Across Species
The results generated by this homology analysis tool for commonly used animal species are shown below. For unlisted species, please refer to the homology analysis between the immunogen sequence and the corresponding species.
A homology of ≥90% is recommended. Generally, higher homology indicates a greater potential for cross-species reactivity. However, protein expression levels may vary among different species, tissues, and cell types. Therefore, the homology analysis results are for reference only and do not guarantee antibody cross-reactivity or experimental performance.
Human
100%
High Homology
Monkey
99%
High Homology
Cow
92%
High Homology
Sheep
91%
High Homology
Rabbit
89%
Moderate Homology
Mouse
88%
Moderate Homology
Rat
87%
Moderate Homology
Dog
86%
Moderate Homology
Zebrafish
65%
Low homology
Drosophila
37%
Low homology
Homology ≥ 90%High Homology
70% ≤ Homology < 90%Moderate Homology
Homology < 70%Low homology
Protocols
Western Blot protocol for ITGB4 antibody
Immunohistochemistry (IHC) protocol for ITGB4 antibody
Immunofluorescence (IF) protocol for ITGB4 antibody
Flow Cytometry (FC) protocol for ITGB4 antibody
Review
Have you used Anti-Integrin beta 4/ITGB4 Antibody Picoband®?
Submit a review and receive $370 in product credits, a $185 Amazon gift card, or our carefully curated gift bundles.
Product Promise
We promise Anti-Integrin beta 4/ITGB4 Antibody Picoband® performs excellently in relevant applications for Flow Cytometry, IF, IHC, IHC-F, ICC, WB. If it doesn't perform as promised, we will refund the product. Learn more
In stock
Order Product
PB9007
Buy one primary antibody get one 0.5ml HRP or Biotin secondary antibody for free.
*Sample sizes are prepared on demand and will take extra lead time. (cannot be conjugated)
$370.00
Troubleshooting
Boster Guarantee
Guaranteed product quality
We promise all of our products perform as described in datasheets.
This product is for Research Use Only. Not for use in diagnostic procedures.
Update date:
Oct 12, 2026