This website uses cookies to ensure you get the best experience on our website.
- Table of Contents
POLH antibody (PB9813) performs well in Flow Cytometry, IF, IHC, ICC, WB and shows reactivity with Human, Rat.
- Validated for inter-lot consistency, specificity, and reproducibility
- Committed to quality since 1993
Filter:
Western blot analysis of POLH using anti-POLH antibody (PB9813).
Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours.
Lane 1: Rat Liver Tissue Lysate at 50ug,
Lane 2: HELA Whole Cell Lysate at 40ug,
Lane 3: SW620 Whole Cell Lysate at 40ug.
After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-POLH antigen affinity purified polyclonal antibody (Catalog # PB9813) at 0.5 μg/mL overnight at 4°C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for POLH at approximately 78 kDa. The expected band size for POLH is at 78 kDa.
Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours.
Lane 1: Rat Liver Tissue Lysate at 50ug,
Lane 2: HELA Whole Cell Lysate at 40ug,
Lane 3: SW620 Whole Cell Lysate at 40ug.
After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-POLH antigen affinity purified polyclonal antibody (Catalog # PB9813) at 0.5 μg/mL overnight at 4°C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for POLH at approximately 78 kDa. The expected band size for POLH is at 78 kDa.
Bundle Save
Anti-DNA polymerase eta/POLH Antibody Picoband®
POLH antibody
| Reactive Species | Host | Application |
|---|---|---|
| Human, Rat | Rabbit | Flow Cytometry, IF, IHC, ICC, WB |
Tested Applications
POLH antibody was positively detected by WB in:
Rat Liver Tissue, HELA Whole Cell, SW620 Whole Cell
Suggested blocking solution with 5% non-fat milk or BSA; (*)Recommended protein loading: 20-40 ug per lane
Recommend Dilution
Application
Dilution
Species
Western blot
0.1-0.5μg/ml
Human, Rat
Immunohistochemistry (Paraffin-embedded Section)
0.5-1μg/ml
Human
Immunocytochemistry/Immunofluorescence
2μg/ml
Human
Flow Cytometry (Fixed)
1-3μg/1x106 cells
Human
* It is recommended to optimize the amount of this reagent in each experimental system to achieve the best results.
Note: For flow cytometry (FCM), suitable for fixed cells only. Not suitable for FACS or surface flow cytometry using live cells.
Reactive Data
Filter:
Boster Guarantee:What is this?
WB
IHC
ICC
IF
FC
Rat
Tested
Recommend
Recommend
Recommend
Recommend
Human
Recommend
Recommend
Recommend
Recommend
Monkey
Predicted
Predicted
Predicted
Predicted
Predicted
Dog
Predicted
Predicted
Predicted
Predicted
Predicted
Mouse
Predicted
Predicted
Predicted
Predicted
Predicted
Product Information
Product Name
Anti-DNA polymerase eta/POLH Antibody Picoband®
View all POLH Antibodies
View all POLH Antibodies
Form
Lyophilized
Uniprot
Gene ID
Storage & Handling
Store at -20˚C for one year from date of receipt. After reconstitution, at 4˚C for one month. It can also be aliquotted and stored frozen at -20˚C for six months. Avoid repeated freeze-thaw cycles.
Host
Rabbit
Contents
Each vial contains antibody formulated with stabilizing components, 0.9 mg NaCl, 0.2 mg Na2HPO4, and 0.05 mg NaN3.
*This antibody is supplied in a stabilized formulation.
Compatibility with conjugation reactions depends on the chemistry of the conjugation method used.
For conjugation methods that are not compatible with the stabilizing components present in this formulation, a carrier-free antibody format is required.
*This antibody is supplied in a stabilized formulation.
Compatibility with conjugation reactions depends on the chemistry of the conjugation method used.
For conjugation methods that are not compatible with the stabilizing components present in this formulation, a carrier-free antibody format is required.
Clonality
Polyclonal
Isotype
Rabbit IgG
Immunogen
E.coli-derived human POLH recombinant protein (Position: A157-R361). Human POLH shares 93.6% amino acid (aa) sequence identity with mouse POLH.
Cross-Reactivity
No cross-reactivity with other proteins.
Reconstitution
Add 0.2ml of distilled water will yield a concentration of 500ug/ml.
Observed Molecular Weight
78 kDa
Calculated Molecular Weight
78.4 kDa
Background of POLH
DNA polymerase eta (Pol η), is a protein that in humans is encoded by the POLH gene. This gene encodes a member of the Y family of specialized DNA polymerases. It copies undamaged DNA with a lower fidelity than other DNA-directed polymerases. However, it accurately replicates UV-damaged DNA; when thymine dimers are present, this polymerase inserts the complementary nucleotides in the newly synthesized DNA, thereby bypassing the lesion and suppressing the mutagenic effect of UV-induced DNA damage. This polymerase is thought to be involved in hypermutation during immunoglobulin class switch recombination. Mutations in this gene result in XPV, a variant type of xeroderma pigmentosum. Several transcript variants encoding different isoforms have been found for this gene.
Cite This Product
Anti-DNA polymerase eta/POLH Antibody Picoband® (Boster Biological Technology, Pleasanton CA, USA, Catalog # PB9813)
Antibody Homology Across Species
The results generated by this homology analysis tool for commonly used animal species are shown below. For unlisted species, please refer to the homology analysis between the immunogen sequence and the corresponding species.
A homology of ≥90% is recommended. Generally, higher homology indicates a greater potential for cross-species reactivity. However, protein expression levels may vary among different species, tissues, and cell types. Therefore, the homology analysis results are for reference only and do not guarantee antibody cross-reactivity or experimental performance.
Human
100%
High Homology
Monkey
99%
High Homology
Dog
96%
High Homology
Mouse
93%
High Homology
Rat
89%
Moderate Homology
Sheep
86%
Moderate Homology
Cow
86%
Moderate Homology
Rabbit
85%
Moderate Homology
Zebrafish
66%
Low homology
Drosophila
42%
Low homology
Homology ≥ 90%High Homology
70% ≤ Homology < 90%Moderate Homology
Homology < 70%Low homology
Protocols
Western Blot protocol for POLH antibody
Review
Have you used Anti-DNA polymerase eta/POLH Antibody Picoband®?
Submit a review and receive $370 in product credits, a $185 Amazon gift card, or our carefully curated gift bundles.
Product Promise
We promise Anti-DNA polymerase eta/POLH Antibody Picoband® performs excellently in relevant applications for Flow Cytometry, IF, IHC, ICC, WB. If it doesn't perform as promised, we will refund the product. Learn more
In stock
Order Product
PB9813
Buy one primary antibody get one 0.5ml HRP or Biotin secondary antibody for free.
*Sample sizes are prepared on demand and will take extra lead time. (cannot be conjugated)
$370.00
Troubleshooting
Boster Guarantee
Guaranteed product quality
We promise all of our products perform as described in datasheets.
This product is for Research Use Only. Not for use in diagnostic procedures.
Update date:
Oct 8, 2026