This website uses cookies to ensure you get the best experience on our website.
- Table of Contents
PSME1 antibody (A04638-2) performs well in ELISA, Flow Cytometry, IP, IF, IHC, ICC, WB and shows reactivity with Human, Mouse, Rat.
- Validated for inter-lot consistency, specificity, and reproducibility
- Committed to quality since 1993
- Over 1 Publication
Filter:
Flow Cytometry analysis of Raji cells using anti-PSME1 antibody (A04638-2).
Overlay histogram showing Raji cells stained with A04638-2 (Blue line). To facilitate intracellular staining, cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-PSME1 Antibody (A04638-2, 1 μg/1x106 cells) for 30 min at 20°C. DyLight®488 conjugated goat anti-rabbit IgG (BA1127, 5-10 μg/1x106 cells) was used as secondary antibody for 30 minutes at 20°C. Isotype control antibody (Green line) was rabbit IgG (1 μg/1x106) used under the same conditions. Unlabelled sample without incubation with primary antibody and secondary antibody (Red line) was used as a blank control.
Overlay histogram showing Raji cells stained with A04638-2 (Blue line). To facilitate intracellular staining, cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-PSME1 Antibody (A04638-2, 1 μg/1x106 cells) for 30 min at 20°C. DyLight®488 conjugated goat anti-rabbit IgG (BA1127, 5-10 μg/1x106 cells) was used as secondary antibody for 30 minutes at 20°C. Isotype control antibody (Green line) was rabbit IgG (1 μg/1x106) used under the same conditions. Unlabelled sample without incubation with primary antibody and secondary antibody (Red line) was used as a blank control.
Bundle Save
Anti-PSME1 Antibody Picoband®
PSME1 antibody
| Reactive Species | Host | Application |
|---|---|---|
| Human, Mouse, Rat | Rabbit | ELISA, Flow Cytometry, IP, IF, IHC, ICC, WB |
Tested Applications
PSME1 antibody was positively detected by WB in:
human Raji whole cell, human MCF-7 whole cell, human Jurkat cells whole cell, rat liver tissue, rat spleen tissue, mouse liver tissue, mouse spleen tissue
Suggested blocking solution with 5% non-fat milk or BSA; (*)Recommended protein loading: 20-40 ug per lane
PSME1 antibody was positively detected by IHC in:
human breast cancer tissue
Use TE buffer pH 9.0 for antigen retrieval; (*) citrate buffer pH 6.0 is an alternative.
PSME1 antibody was positively detected by ICC/IF in:
U2OS cell cell
PSME1 antibody was positively detected by IP in:
Jurkat cell
PSME1 antibody was positively detected by FC in:
Raji cell
Recommend Dilution
Application
Dilution
Species
Western blot
0.1-0.25 μg/ml
Human, Mouse, Rat
Immunohistochemistry(Paraffin-embedded Section)
2-5 μg/ml
Human
Immunocytochemistry/Immunofluorescence
5 μg/ml
Human
Immunoprecipitation
0.5-2 μg/ml
Human
Flow Cytometry (Fixed)
1-3 μg/1x106 cells
Human
ELISA
0.1-0.5 μg/ml
-
* It is recommended to optimize the amount of this reagent in each experimental system to achieve the best results.
Note: For flow cytometry (FCM), suitable for fixed cells only. Not suitable for FACS or surface flow cytometry using live cells.
Reactive Data
Filter:
Boster Guarantee:What is this?
WB
IHC
IF
ELISA
Human
Tested
Tested
Recommend
Recommend
Rat
Tested
Recommend
Mouse
Tested
Recommend
Monkey
Predicted
Predicted
Predicted
Predicted
Dog
Predicted
Predicted
Predicted
Predicted
Bovine
Predicted
Predicted
Predicted
Predicted
Sheep
Predicted
Predicted
Predicted
Predicted
Rabbit
Predicted
Predicted
Predicted
Predicted
Product Information
Product Name
Anti-PSME1 Antibody Picoband®
View all PSME1 Antibodies
View all PSME1 Antibodies
Form
Lyophilized
Uniprot
Gene ID
Storage & Handling
At -20°C for one year from date of receipt.
After reconstitution, at 4°C for one month. It can also be aliquotted and stored frozen at -20°C for six months.
Avoid repeated freezing and thawing.
Host
Rabbit
Contents
Each vial contains 4 mg Trehalose, 0.9 mg NaCl, 0.2 mg Na2HPO4.
Clonality
Polyclonal
Isotype
Rabbit IgG
Immunogen
E.coli-derived human PSME1 recombinant protein (Position: M1-Y249).
Cross-Reactivity
No cross-reactivity with other proteins.
Reconstitution
Adding 0.2 ml of distilled water will yield a concentration of 500 µg/ml.
Observed Molecular Weight
29 kDa
Calculated Molecular Weight
28.7 kDa
Background of PSME1
Proteasome activator complex subunit 1 is a protein that in humans is encoded by the PSME1 gene. The 26S proteasome is a multicatalytic proteinase complex with a highly ordered structure composed of 2 complexes, a 20S core and a 19S regulator. The 20S core is composed of 4 rings of 28 non-identical subunits; 2 rings are composed of 7 alpha subunits and 2 rings are composed of 7 beta subunits. The 19S regulator is composed of a base, which contains 6 ATPase subunits and 2 non-ATPase subunits, and a lid, which contains up to 10 non-ATPase subunits. Proteasomes are distributed throughout eukaryotic cells at a high concentration and cleave peptides in an ATP/ubiquitin-dependent process in a non-lysosomal pathway. An essential function of a modified proteasome, the immunoproteasome, is the processing of class I MHC peptides. The immunoproteasome contains an alternate regulator, referred to as the 11S regulator or PA28, that replaces the 19S regulator. Three subunits (alpha, beta and gamma) of the 11S regulator have been identified. This gene encodes the alpha subunit of the 11S regulator, one of the two 11S subunits that is induced by gamma-interferon. Three alpha and three beta subunits combine to form a heterohexameric ring. Alternative splicing results in multiple transcript variants.
Cite This Product
Anti-PSME1 Antibody Picoband® (Boster Biological Technology, Pleasanton CA, USA, Catalog # A04638-2)
Antibody Homology Across Species
The results generated by this homology analysis tool for commonly used animal species are shown below. For unlisted species, please refer to the homology analysis between the immunogen sequence and the corresponding species.
A homology of ≥90% is recommended. Generally, higher homology indicates a greater potential for cross-species reactivity. However, protein expression levels may vary among different species, tissues, and cell types. Therefore, the homology analysis results are for reference only and do not guarantee antibody cross-reactivity or experimental performance.
Human
100%
High Homology
Monkey
99%
High Homology
Dog
99%
High Homology
Cow
97%
High Homology
Sheep
97%
High Homology
Rat
96%
High Homology
Mouse
95%
High Homology
Rabbit
94%
High Homology
Zebrafish
59%
Low homology
Drosophila
37%
Low homology
Homology ≥ 90%High Homology
70% ≤ Homology < 90%Moderate Homology
Homology < 70%Low homology
Protocols
Western Blot protocol for PSME1 antibody
Immunohistochemistry (IHC) protocol for PSME1 antibody
Immunocytochemistry/Immunofluorescence (ICC/IF) protocol for PSME1 antibody
Immunoprecipitation (IP) protocol for PSME1 antibody
Flow Cytometry (FC) protocol for PSME1 antibody
Publications
Application:
Species:
Arsenic Inhibits the PA28α/β-PSMB5 Pathway Blocking Phosphorylated TFEB Degradation and Causing Lysosomal Dysfunction that Damages the Liver
Published: 2026-03-31
Journal: BIOLOGICAL TRACE ELEMENT RESEARCH
Application: IHC
Impact Factor: 3.60
Species: Rat
PMID: 41917614
Review
Have you used Anti-PSME1 Antibody Picoband®?
Submit a review and receive $370 in product credits, a $185 Amazon gift card, or our carefully curated gift bundles.
Product Promise
We promise Anti-PSME1 Antibody Picoband® performs excellently in relevant applications for ELISA, Flow Cytometry, IP, IF, IHC, ICC, WB. If it doesn't perform as promised, we will refund the product. Learn more
In stock
Order Product
A04638-2
Buy one primary antibody get one 0.5ml HRP or Biotin secondary antibody for free.
*Sample sizes are prepared on demand and will take extra lead time. (cannot be conjugated)
$370.00
Troubleshooting
Boster Guarantee
Guaranteed product quality
We promise all of our products perform as described in datasheets.
This product is for Research Use Only. Not for use in diagnostic procedures.
Update date:
Oct 2, 2026