This website uses cookies to ensure you get the best experience on our website.
- Table of Contents
RANBP1 antibody (A04000-2) performs well in Flow Cytometry, IF, IHC, ICC, WB and shows reactivity with Human, Mouse, Rat.
- Validated for inter-lot consistency, specificity, and reproducibility
- Committed to quality since 1993
Filter:
Flow Cytometry analysis of U937 cells using anti-RanBP1 antibody (A04000-2).
Overlay histogram showing U937 cells stained with A04000-2 (Blue line). To facilitate intracellular staining, cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-RanBP1 Antibody (A04000-2, 1μg/1x106 cells) for 30 min at 20°C. DyLight®488 conjugated goat anti-rabbit IgG (BA1127, 5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20°C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample without incubation with primary antibody and secondary antibody (Red line) was used as a blank control.
Overlay histogram showing U937 cells stained with A04000-2 (Blue line). To facilitate intracellular staining, cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-RanBP1 Antibody (A04000-2, 1μg/1x106 cells) for 30 min at 20°C. DyLight®488 conjugated goat anti-rabbit IgG (BA1127, 5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20°C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample without incubation with primary antibody and secondary antibody (Red line) was used as a blank control.
Designing a Western blot or IHC for RANBP1? The guides cover the expected band size and staining pattern, antibodies backed by real images, the controls to run, and protocols from published papers.
Bundle Save
Anti-RanBP1 Antibody Picoband®
RANBP1 antibody
| Reactive Species | Host | Application |
|---|---|---|
| Human, Mouse, Rat | Rabbit | Flow Cytometry, IF, IHC, ICC, WB |
Tested Applications
RANBP1 antibody was positively detected by WB in:
human K562 whole cell, human HEK293 whole cell, human HL-60 whole cell, human U20S whole cell, human A431 whole cell, human HEPG2 whole cell, human U937 whole cell, rat testis tissue, rat C6 whole cell, mouse testis tissue
Suggested blocking solution with 5% non-fat milk or BSA; (*)Recommended protein loading: 20-40 ug per lane
RANBP1 antibody was positively detected by IHC in:
mouse intestine tissue, rat intestine tissue, human intestinal cancer tissue, human lung cancer tissue
Use EDTA pH 8.0 for antigen retrieval; (*) citrate buffer pH 6.0 is an alternative.
RANBP1 antibody was positively detected by ICC/IF in:
A431 cell
RANBP1 antibody was positively detected by FC in:
U937 cell
Recommend Dilution
Application
Dilution
Species
Western blot
0.1-0.5μg/ml
Human, Mouse, Rat
Immunohistochemistry (Paraffin-embedded Section)
0.5-1μg/ml
Human, Mouse, Rat
Immunocytochemistry/Immunofluorescence
2μg/ml
Human
Flow Cytometry (Fixed)
1-3μg/1x106 cells
Human
* It is recommended to optimize the amount of this reagent in each experimental system to achieve the best results.
Note: For flow cytometry (FCM), suitable for fixed cells only. Not suitable for FACS or surface flow cytometry using live cells.
Reactive Data
Filter:
Boster Guarantee:What is this?
WB
IHC
IF
Human
Tested
Tested
Recommend
Rat
Tested
Tested
Recommend
Mouse
Tested
Tested
Recommend
Dog
Predicted
Predicted
Predicted
Sheep
Predicted
Predicted
Predicted
Bovine
Predicted
Predicted
Predicted
Rabbit
Predicted
Predicted
Predicted
Product Information
Product Name
Anti-RanBP1 Antibody Picoband®
View all RANBP1 Antibodies
View all RANBP1 Antibodies
Form
Lyophilized
Uniprot
Gene ID
Storage & Handling
Store at -20˚C for one year from date of receipt. After reconstitution, at 4˚C for one month. It can also be aliquotted and stored frozen at -20˚C for six months. Avoid repeated freeze-thaw cycles.
Host
Rabbit
Contents
Each vial contains antibody formulated with stabilizing components, 0.9 mg NaCl, 0.2 mg Na2HPO4, and 0.05 mg NaN3.
*This antibody is supplied in a stabilized formulation.
Compatibility with conjugation reactions depends on the chemistry of the conjugation method used.
For conjugation methods that are not compatible with the stabilizing components present in this formulation, a carrier-free antibody format is required.
*This antibody is supplied in a stabilized formulation.
Compatibility with conjugation reactions depends on the chemistry of the conjugation method used.
For conjugation methods that are not compatible with the stabilizing components present in this formulation, a carrier-free antibody format is required.
Clonality
Polyclonal
Isotype
Rabbit IgG
Immunogen
E.coli-derived human RanBP1 recombinant protein (Position: A2-Q201). Human RanBP1 shares 93.1% amino acid (aa) sequence identity with mouse RanBP1.
Cross-Reactivity
No cross-reactivity with other proteins.
Reconstitution
Add 0.2ml of distilled water will yield a concentration of 500ug/ml.
Observed Molecular Weight
27 kDa
Calculated Molecular Weight
23.3 kDa
Background of RANBP1
Ran-specific binding protein 1 is an enzyme that in humans is encoded by the RANBP1 gene. This gene encodes a protein that forms a complex with Ras-related nuclear protein (Ran) and metabolizes guanoside triphosphate (GTP). This complex participates in the regulation of the cell cycle by controlling transport of proteins and nucleic acids into the nucleus. There are multiple pseudogenes for this gene on chromosomes 9, 12, 17, and X. Alternative splicing results in multiple transcript variants.
Cite This Product
Anti-RanBP1 Antibody Picoband® (Boster Biological Technology, Pleasanton CA, USA, Catalog # A04000-2)
Antibody Homology Across Species
The results generated by this homology analysis tool for commonly used animal species are shown below. For unlisted species, please refer to the homology analysis between the immunogen sequence and the corresponding species.
A homology of ≥90% is recommended. Generally, higher homology indicates a greater potential for cross-species reactivity. However, protein expression levels may vary among different species, tissues, and cell types. Therefore, the homology analysis results are for reference only and do not guarantee antibody cross-reactivity or experimental performance.
Human
100%
High Homology
Dog
96%
High Homology
Mouse
95%
High Homology
Sheep
95%
High Homology
Rat
94%
High Homology
Cow
94%
High Homology
Rabbit
90%
High Homology
Monkey
86%
Moderate Homology
Zebrafish
73%
Moderate Homology
Drosophila
34%
Low homology
Homology ≥ 90%High Homology
70% ≤ Homology < 90%Moderate Homology
Homology < 70%Low homology
Protocols
Western Blot protocol for RANBP1 antibody
Immunohistochemistry (IHC) protocol for RANBP1 antibody
Immunocytochemistry/Immunofluorescence (ICC/IF) protocol for RANBP1 antibody
Flow Cytometry (FC) protocol for RANBP1 antibody
Review
Have you used Anti-RanBP1 Antibody Picoband®?
Submit a review and receive $370 in product credits, a $185 Amazon gift card, or our carefully curated gift bundles.
Product Promise
We promise Anti-RanBP1 Antibody Picoband® performs excellently in relevant applications for Flow Cytometry, IF, IHC, ICC, WB. If it doesn't perform as promised, we will refund the product. Learn more
In stock
Order Product
A04000-2
Buy one primary antibody get one 0.5ml HRP or Biotin secondary antibody for free.
*Sample sizes are prepared on demand and will take extra lead time. (cannot be conjugated)
$370.00
Troubleshooting
Boster Guarantee
Guaranteed product quality
We promise all of our products perform as described in datasheets.
This product is for Research Use Only. Not for use in diagnostic procedures.
Update date:
Oct 27, 2026