This website uses cookies to ensure you get the best experience on our website.
- Table of Contents
SEMA3A antibody (A01761-1) performs well in ELISA, WB and shows reactivity with Human, Mouse, Rat.
- Validated for inter-lot consistency, specificity, and reproducibility
- Committed to quality since 1993
- Over 1 Publication
Filter:
Western blot analysis of Semaphorin 3A using anti-Semaphorin 3A antibody (A01761-1).
Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.
Lane 1: rat brain tissue lysates,
Lane 2: mouse brain tissue lysates,
Lane 3: human U-87MG whole cell lysates.
After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-Semaphorin 3A antigen affinity purified polyclonal antibody (Catalog # A01761-1) at 0.5 ug/mL overnight at 4 then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:10000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for Semaphorin 3A at approximately 95KD. The expected band size for Semaphorin 3A is at 89KD.
Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.
Lane 1: rat brain tissue lysates,
Lane 2: mouse brain tissue lysates,
Lane 3: human U-87MG whole cell lysates.
After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-Semaphorin 3A antigen affinity purified polyclonal antibody (Catalog # A01761-1) at 0.5 ug/mL overnight at 4 then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:10000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for Semaphorin 3A at approximately 95KD. The expected band size for Semaphorin 3A is at 89KD.
Bundle Save
Anti-Semaphorin 3A/SEMA3A Antibody Picoband®
SEMA3A antibody
| Reactive Species | Host | Application |
|---|---|---|
| Human, Mouse, Rat | Rabbit | ELISA, WB |
Tested Applications
SEMA3A antibody was positively detected by WB in:
rat brain tissue, mouse brain tissue, human U-87MG whole cell
Suggested blocking solution with 5% non-fat milk or BSA; (*)Recommended protein loading: 20-40 ug per lane
Recommend Dilution
Application
Dilution
Species
Western blot
0.1-0.5μg/ml
ELISA
0.1-0.5μg/ml
* It is recommended to optimize the amount of this reagent in each experimental system to achieve the best results.
Reactive Data
Filter:
Boster Guarantee:What is this?
WB
ELISA
Rat
Tested
Recommend
Mouse
Tested
Recommend
Human
Tested
Recommend
Monkey
Predicted
Predicted
Bovine
Predicted
Predicted
Dog
Predicted
Predicted
Sheep
Predicted
Predicted
Rabbit
Predicted
Predicted
Product Information
Product Name
Anti-Semaphorin 3A/SEMA3A Antibody Picoband®
View all SEMA3A Antibodies
View all SEMA3A Antibodies
Form
Lyophilized
Uniprot
Gene ID
Storage & Handling
Store at -20˚C for one year from date of receipt. After reconstitution, at 4˚C for one month. It can also be aliquotted and stored frozen at -20˚C for six months. Avoid repeated freeze-thaw cycles.
Host
Rabbit
Contents
Each vial contains antibody formulated with stabilizing components, 0.9 mg NaCl, 0.2 mg Na2HPO4, and 0.05 mg NaN3.
*This antibody is supplied in a stabilized formulation.
Compatibility with conjugation reactions depends on the chemistry of the conjugation method used.
For conjugation methods that are not compatible with the stabilizing components present in this formulation, a carrier-free antibody format is required.
*This antibody is supplied in a stabilized formulation.
Compatibility with conjugation reactions depends on the chemistry of the conjugation method used.
For conjugation methods that are not compatible with the stabilizing components present in this formulation, a carrier-free antibody format is required.
Clonality
Polyclonal
Isotype
Rabbit IgG
Immunogen
E. coli-derived human Semaphorin 3A recombinant protein (Position: N21-D223).
Cross-Reactivity
No cross-reactivity with other proteins.
Reconstitution
Add 0.2ml of distilled water will yield a concentration of 500ug/ml.
Observed Molecular Weight
95 kDa
Calculated Molecular Weight
88.9 kDa
Background of SEMA3A
SEMA3A is also known as COLL1, SEMA1 or SEMAL. This gene is a member of the semaphorin family and encodes a protein with an Ig-like C2-type (immunoglobulin-like) domain, a PSI domain and a Sema domain. This secreted protein can function as either a chemorepulsive agent, inhibiting axonal outgrowth, or as a chemoattractive agent, stimulating the growth of apical dendrites. In both cases, the protein is vital for normal neuronal pattern development. Increased expression of this protein is associated with schizophrenia and is seen in a variety of human tumor cell lines. Also, aberrant release of this protein is associated with the progression of Alzheimer's disease.
Cite This Product
Anti-Semaphorin 3A/SEMA3A Antibody Picoband® (Boster Biological Technology, Pleasanton CA, USA, Catalog # A01761-1)
Antibody Homology Across Species
The results generated by this homology analysis tool for commonly used animal species are shown below. For unlisted species, please refer to the homology analysis between the immunogen sequence and the corresponding species.
A homology of ≥90% is recommended. Generally, higher homology indicates a greater potential for cross-species reactivity. However, protein expression levels may vary among different species, tissues, and cell types. Therefore, the homology analysis results are for reference only and do not guarantee antibody cross-reactivity or experimental performance.
Human
100%
High Homology
Monkey
100%
High Homology
Cow
98%
High Homology
Dog
98%
High Homology
Rat
98%
High Homology
Sheep
98%
High Homology
Mouse
97%
High Homology
Rabbit
96%
High Homology
Zebrafish
78%
Moderate Homology
Homology ≥ 90%High Homology
70% ≤ Homology < 90%Moderate Homology
Homology < 70%Low homology
Protocols
Western Blot protocol for SEMA3A antibody
Publications
Application:
Zhou H, Wu A, Fu W, Lv Z, Zhang Z. Oncol Lett. 2014 May;7(5):1395-1400. Epub 2014 Feb 27. Significance Of Semaphorin-3A And Mmp-14 Protein Expression In Non-Small Cell Lung Cancer.
PMID: 24765144
Review
Have you used Anti-Semaphorin 3A/SEMA3A Antibody Picoband®?
Submit a review and receive $370 in product credits, a $185 Amazon gift card, or our carefully curated gift bundles.
Product Promise
We promise Anti-Semaphorin 3A/SEMA3A Antibody Picoband® performs excellently in relevant applications for ELISA, WB. If it doesn't perform as promised, we will refund the product. Learn more
In stock
Order Product
A01761-1
Buy one primary antibody get one 0.5ml HRP or Biotin secondary antibody for free.
*Sample sizes are prepared on demand and will take extra lead time. (cannot be conjugated)
$370.00
Troubleshooting
Boster Guarantee
Guaranteed product quality
We promise all of our products perform as described in datasheets.
This product is for Research Use Only. Not for use in diagnostic procedures.
Update date:
Oct 3, 2026